- Research Article
7
- 10.1016/j.wear.2024.205360
Polymer composite coatings subjected to sliding wear under simulated lunar temperature and dust conditions
- Apr 02, 2024
- Wear
- Kian Bashandeh + 3 more +3
Publications from 2021 to 2026
Showing 5 of 5 papers
Polymer composite coatings subjected to sliding wear under simulated lunar temperature and dust conditions
Extreme environment tribological study of advanced bearing polymers for space applications
Wear Performance of Metal Materials Fabricated by Powder Bed Fusion: A Literature Review
Powder Bed Fusion (PBF) is an additive manufacturing technology used to produce metal-based materials. PBF materials have a unique microstructure as a result from repeated and sharp heating/cooling cycles. Many researches have been carried out on relations between processing parameters of the PBF technology, obtained microstructures and mechanical properties. However, there are few studies on the tribological properties of PBF materials at various contact conditions. This article describes previous and recent studies related to the friction performance. This is a critical aspect if PBF materials are applied to friction pair components. This paper discusses wear rates and wear mechanisms of PBF materials under dry friction, boundary lubrication and micro-motion conditions. PBF materials have higher hardness due to fine grains. PBF materials have a higher wear resistance than traditional materials due to their solid solution strengthening. In addition, hard particles on the surface of PBF components can effectively reduce wear. The reasonable combination of process parameters can effectively improve the density of parts and thus further improve the wear resistance. This review paper summarized the wear behavior of PBF materials, the wear mechanism of metal materials from dry friction to different lubrication conditions, and the wear behavior under fretting wear. This will help to control the processing parameters and material powder composition of parts, so as to achieve the required material properties of parts and further improve the wear performance.
Read moreHeat-Induced Polycondensation Reaction with Self-Generated Blowing Agent Forming Aromatic Thermosetting Copolyester Foams
This work presents a unique chemical strategy and a facile fabrication scheme toward development of novel aromatic thermosetting copolyester foams. Designed aromatic-based acetoxy and carboxylic acid end-group oligomers carry out an endothermic condensation polymerization reaction, which self-generates acetic acid blowing agent forming macrocellular porous morphology within cross-linked ester backbone polymer matrix. Herein, we provide a visual insight into the foaming reaction between the constituent oligomer groups via optical micrographs captured at polymerization phase transformation stages; oligomer melt-compounding, bubble nucleation via release of gaseous acetic acid, and subsequently bubble growth at elevated temperatures. Furthermore, we show cure and postcure characteristics of the constituent oligomers in the course of the foaming reaction that the most favorable pair of cure temperature and cure time is determined. Then, combining these outcomes, we design an optimum cure cycle and fabrication process to develop physical products of aromatic thermosetting copolyester foams. Afterward, we assess thermomechanical properties with respect to cross-linking densities and molecular weights of the aromatic thermosetting copolyester foams. Aromatic thermosetting copolyester foams offer a unique thermoset polymer system that would address needs for emerging techonologies for development of lightweight, strong, and high temperature stable innovative materials.
Read moreAdvanced polymeric coatings for tilting pad bearings with application in the oil and gas industry