- Research Article
18
- 10.1016/j.ces.2013.10.027
Numerical simulation of vertical liquid-film wave dynamics
- Oct 26, 2013
- Chemical Engineering Science
- Gregor D Wehinger + 4 more +4
Publications from 2021 to 2026
Showing 5 of 5 papers
Numerical simulation of vertical liquid-film wave dynamics
High‐order CFD methods: current status and perspective
SUMMARYAfter several years of planning, the 1st International Workshop on High‐Order CFD Methods was successfully held in Nashville, Tennessee, on January 7–8, 2012, just before the 50th Aerospace Sciences Meeting. The American Institute of Aeronautics and Astronautics, the Air Force Office of Scientific Research, and the German Aerospace Center provided much needed support, financial and moral. Over 70 participants from all over the world across the research spectrum of academia, government labs, and private industry attended the workshop. Many exciting results were presented. In this review article, the main motivation and major findings from the workshop are described. Pacing items requiring further effort are presented. Copyright © 2013 John Wiley & Sons, Ltd.
Read moreRecord 5.3 Gbit/s Transmission over 50m 1mm Core Diameter Graded-Index Plastic Optical Fiber
We report multi-Gbit/s capacity in 1-mm diameter graded index plastic optical fiber exploiting low-cost eye safe compliant transceivers. Transmission rates between 5.3 and 7.6 Gbit/s are achieved for lengths between 10 and 50m using DMT.
Read moreRecord 5.3 Gbit/s Transmission over 50m 1mm Core Diameter Graded-Index Plastic Optical Fiber
We report multi-Gbit/s capacity in 1-mm diameter graded index plastic optical fiber exploiting low-cost eye safe compliant transceivers. Transmission rates between 5.3 and 7.6 Gbit/s are achieved for lengths between 10 and 50m using DMT.
Read moreWave Load and Structural Analysis for a Jack-Up Platform in Freak Waves
This paper analyzed the effects of freak waves on a mobile jack-up drilling platform stationed in exposed waters of the North Sea. Under freak wave conditions, highly nonlinear effects, such as wave run-up on platform legs and impact-related wave loads on the hull, had to be considered. Traditional methods based on the Morison formula needed to be critically examined to accurately predict these loads. Our analysis was based on the use of advanced computational fluid dynamics techniques. The code used here solves the Reynolds-averaged Navier–Stokes equations and relies on the interface-capturing technique of the volume-of-fluid type. It computed the two-phase flow of water and air to describe the physics associated with complex free-surface shapes with breaking waves and air trapping, hydrodynamic phenomena that had to be considered to yield reliable predictions. Lastly, the finite element method was used to apply the wave-induced loads onto a comprehensive finite element structural model of the platform, yielding deformations and stresses.
Read more