- Research Article
1
- 10.1016/j.jece.2025.119709
Novel methodology for conceptual biorefinery design based on a three-level characterisation of organic streams
- Dec 01, 2025
- Journal of Environmental Chemical Engineering
- E Rovira-Cal + 9 more +9
Publications from 2021 to 2026
Showing 7 of 7 papers
Novel methodology for conceptual biorefinery design based on a three-level characterisation of organic streams
Microbial Biotransformation of Agro-Industrial Fibre-Rich By-Products into Functional Beverages
This study explores the development of functional fermented beverages using fibre-rich residues derived from olive pruning, vineyard pruning, chicory root, and red onion, obtained after subcritical water extraction of polyphenols. Two microbial strains, Lactiplantibacillus plantarum and Bacillus subtilis, were evaluated for their fermentation performance across different fibre matrices, with and without sugar supplementation. Key parameters including microbial growth, pH evolution, and reducing sugar content were monitored, and Lactiplantibacillus plantarum showed superior acidification and viability (>9 log CFU/mL), especially in sugar-enriched formulations, while Bacillus subtilis showed a limited performance. Based on fermentation efficiency, three sugar-supplemented formulations were selected to scale-up: olive pruning fibre and vineyard pruning fibre fermented with Lactiplantibacillus plantarum and olive pruning fibre fermented with Bacillus subtilis. Red onion fibre extract was excluded from scale-up experiments due to its high viscosity, which made it impossible to measure reducing sugars, consistent with its high water-holding capacity. Fermentation significantly increased antioxidant capacity, reaching up to 750 µmol Trolox equivalents/L and 18 mg of gallic acid equivalents/L in L. plantarum-fermented samples, confirming microbial release of bound phenolics and formation of bioactive metabolites. The resulting beverages were microbiologically stable (final pH < 4.5), sensorially acceptable, and potentially antioxidant-rich, supporting their role in sustainable food system development and circular bioeconomy.
Read morePhotoprotective and anti-inflammatory potential of polyphenol-rich extracts from agricultural by-products of chicory leaves, red onion peel, vineyard pruning, and olive pruning in UV-B-exposed 3D human skin equivalents
Sustainable Polyphenol-Rich Extracts from Agricultural By-Products: Infectivity Inhibition Potential for Human Coronavirus 229E.
Polyphenol-rich extracts derived from agricultural by-products exhibit promising antiviral properties. This study evaluated the antiviral potential of extracts from red onion peels, vineyard prunings, olive prunings and chicory leaves against human coronavirus HuCoV-229E. Subcritical water extraction and resin adsorption techniques were applied to produce the extracts. The extracts were further characterised for their bioactive content, and three out of four extracts showed a high polyphenol content (>200 mg/g). The antiviral activity was assessed through viral infectivity and replication inhibition assays in human MRC-5 host cells. The results indicate that chicory leaf and red onion peel extracts demonstrated significant antiviral effects, with effective concentrations (EC50) of 61.43 µg/mL and 10.1 µg/mL, respectively. Olive pruning extract exhibited moderate activity, while vineyard pruning extract showed limited efficacy. These findings suggest that polyphenol-rich agricultural by-products could serve as sustainable sources for antiviral agents, warranting further investigation into their mechanisms of action and potential applications against other coronaviruses, including SARS-CoV-2.
Read moreInfluence of Green Nanofillers on the Morphological, Mechanical Properties, and Degradation Kinetics of <scp>PBS</scp>/<scp>PBAT</scp> Blends: A Potential Sustainable Strategy for Fisheries Applications
ABSTRACTSynthetic nylon fishing nets pose significant threats to marine ecosystems, contributing to ghost fishing and microplastic pollution. While the development of biodegradable polymers for marine applications has progressed, significant challenges remain in achieving the mechanical performance required for fishing nets, particularly under water conditions. This study addresses these challenges by investigating the incorporation of nanochitin and nanocellulose fillers into PBS/PBAT blends, aiming to optimize their mechanical properties and to control the degradation behavior for marine environments. First, various PBS/PBAT nanocomposites were prepared with chitin and cellulose nanofillers, and tensile tests identified the most effective fillers for mechanical reinforcement. Differential scanning calorimetry (DSC), size exclusion chromatography (SEC), and scanning electron microscopy (SEM). The results demonstrated significant mechanical reinforcement in air conditions, with efficient nanofiller dispersion, particularly in two nanocomposites: PBS/PBAT/ChNCsLac1% and PBS/PBAT/NFCEster1%. These formulations exhibited notable improvements in mechanical properties compared to the other blends. Specifically, Young's modulus increased by +15% and + 22%, respectively, while elongation at break improved by +10% and + 7%, respectively. Under aqueous conditions, PBS/PBAT/ChNCsLac1% also showed a remarkable +52% increase in elongation at break. Additionally, weathering tests were also examined the nanofillers' influence on degradation kinetics, revealing that chitin nanofillers accelerated degradation under controlled conditions. These findings suggest that while nanochitins and nanocelluloses improve mechanical properties in certain environments, further research is required to optimize their performance in water.
Read moreUnlocking the potential of Algerian lignocellulosic biomass: exploring indigenous microbial diversity for enhanced enzyme and sugar production.
Nowadays, natural resources like lignocellulosic biomass are gaining more and more attention. This study was conducted to analyse chemical composition of dried and ground samples (500μm) of various Algerian bioresources including alfa stems (AS), dry palms (DP), olive pomace (OP), pinecones (PC), and tomato waste (TW). AS exhibited the lowest lignin content (3.60 ± 0.60%), but the highest cellulose (58.30 ± 2.06%), and hemicellulose (20.00 ± 3.07%) levels. DP, OP, and PC had around 30% cellulose, and 10% hemicellulose. OP had the highest lignin content (29.00 ± 6.40%), while TW contained (15.70 ± 2.67% cellulose, 13.70 ± 0.002% hemicellulose, and 17.90 ± 4.00% lignin). Among 91 isolated microorganisms, nine were selected for cellulase, xylanase, and/or laccase production. The ability of Bacillus mojavensis to produce laccase and cellulase, as well as B. safensis to produce cellulase and xylanase, is being reported for the first time. In submerged conditions, TW was the most suitable substrate for enzyme production. In this conditions, T. versicolor K1 was the only strain able to produce laccase (4,170 ± 556 U/L). Additionally, Coniocheata hoffmannii P4 exhibited the highest cellulase activity (907.62 ± 26.22 U/L), and B. mojavensis Y3 the highest xylanase activity (612.73 ± 12.73 U/L). T. versicolor K1 culture showed reducing sugars accumulation of 18.87% compared to initial concentrations. Sucrose was the predominant sugar detected by HPLC analysis (13.44 ± 0.02g/L). Our findings suggest that T. versicolor K1 holds promise for laccase production, while TW represents a suitable substrate for sucrose production.
Read moreComparing Innovative Versus Conventional Ham Processes via Environmental Life Cycle Assessment Supplemented with the Assessment of Nitrite Impacts on Human Health
Global sustainability indicators, particularly in human health, are necessary to describe agrifood products footprint. Nitrosamines are toxic molecules that are often encountered in cured and processed meats. As they are frequently consumed, meat-based products need to be assessed to evaluate their potential impact on human health. This article provides a methodological framework based on life cycle assessment for comparing meat product processing scenarios. The respective contributions of each step of the product life cycle are extended with a new human health indicator, nitrosamine toxicity, which has not been previously included in life cycle assessment (LCA) studies and tools (software and databases). This inclusion allows for the comparison of conventional versus innovative processes. Nitrosamines toxicity was estimated to be 2.20x10−6 disability-adjusted life years (DALY) for 1 kg of consumed conventional cooked ham while 4.54x10−7 DALY for 1 kg of consumed innovative cooked ham. The potential carcinogenic and noncarcinogenic effects of nitrosamines from meat products on human health are taken into account. Human health indicators are an important step forward in the comprehensive application of LCA methodology to improve the global sustainability of food systems.
Read more