DuPont (France)

Scale formation on reactor walls remains a major operational challenge in high-pressure acid leaching (HPAL) of nickel laterites, leading to reduced heat transfer efficiency, increased maintenance, and process downtime. This study investigates the influence of slurry solid content and acid-to-ore (A/O) ratio on autoclave scale formation during laterite leaching. Experiments performed under typical HPAL conditions (265 °C and ~50 bar) with laterite ore examined how these parameters affect metal extraction, scale quantity, and mineralogical composition. Scale deposits were quantified and analysed to determine their composition and to evaluate the precipitation tendency of potential scale-forming minerals through solution speciation and supersaturation behaviour during HPAL leaching. The results show that increasing slurry solids significantly promotes scale formation, producing denser and more strongly adherent deposits, while higher acid dosage further enhances precipitation of sulphate-bearing phases. Mineralogical analyses indicate that the scales are primarily composed of hematite, hydronium alunite, and magnesium sulphates, whose formation is driven by solution supersaturation during leaching. Elevated solids content also promotes incorporation of valuable metals into the scale matrix, leading to reduced nickel and cobalt recovery. In contrast, operation at moderate solids content and near-stoichiometric acid addition limits scale accumulation while maintaining high metal extraction. These findings highlight the coupling between HPAL operating conditions, solution chemistry, and fouling behaviour, and suggest an operational window for reducing scale formation without the use of chemical additives that may interfere with downstream processing. • Experimental study of autoclave wall scale under HPAL conditions (265 °C). • Scale mineralogy and morphology linked to solution chemistry evolution. • High solids promote denser scale with strong wall adhesion. • Operating window suggested to limit fouling without chemical additives.

Streptococcus thermophilus is a lactic acid bacterium widely used by the dairy industry for the manufacture of yogurt and specialty cheeses. It is also a Gram-positive bacterial model to study phage-host interactions. CRISPR-Cas systems are one of the most prevalent phage resistance mechanisms in S. thermophilus. Little information is available about other host factors involved in phage replication in this food-grade streptococcal species. We used the model strain S. thermophilus SMQ-301 and its virulent phage DT1, harboring the anti-CRISPR protein AcrIIA6, to show that a host gene coding for a methionine aminopeptidase (metAP) is necessary for phage DT1 to complete its lytic cycle. A single mutation in metAP provides S. thermophilus SMQ-301 with strong resistance against phage DT1. The mutation impedes a late step of the lytic cycle since phage adsorption, DNA replication, and protein expression were not affected. When the mutated strain was complemented with the wild-type version of the gene, the phage sensitivity phenotype was restored. When this mutation was introduced into other S. thermophilus strains it provided resistance against cos-type (Sfi21dt1virus genus) phages but replication of pac-type (Sfi11virus genus) phages was not affected. The mutation in the gene coding for the MetAP induces amino acid change in a catalytic domain conserved across many bacterial species. Introducing the same mutation in Streptococcus mutans also provided a phage resistance phenotype, suggesting the wide-ranging importance of the host methionine aminopeptidase in phage replication.

Abstract Corn poppy (Papaver rhoeasL.) is the most widespread broadleaf weed species infesting winter cereals in Europe. Biotypes that are resistant to both 2,4-D and tribenuron-methyl, an acetolactate synthase (ALS) inhibitor, have evolved in recent decades, thus narrowing the options for effective chemical control. Though the effectiveness of several integrated weed management (IWM) strategies have been confirmed, none of these strategies have been tested to manage multiple herbicide–resistantP. rhoeasunder no-till planting. With the expansion of no-till systems, it is important to prove the effectiveness of such strategies. In this study, a field experiment over three consecutive seasons was conducted to evaluate and compare the effects of different weed management strategies, under either direct drilling (i.e., no-till) or intensive tillage, on a multiple herbicide–resistantP. rhoeaspopulation. Moreover, evaluations were carried out as to whether the proportions of ALS inhibitor–resistant individuals were affected by the tillage systems for each IWM strategy at the end of the 3-yr period. The IWM strategies tested in this research included crop rotation, delayed sowing, and different herbicide programs such as PRE plus POST or POST. All IWM strategies greatly reduced the initial density ofP. rhoeaseach season (≥ 95%) under either direct drilling or intensive tillage. After 3 yr, the IWM strategies were very effective in both tillage systems, though the effects were stronger under direct drilling (~95%) compared with intensive tillage (~86%). At the end of the study, the proportion of ALS inhibitor–resistant plants was not different between the IWM strategies in both tillage systems (94% on average). Therefore, crop rotation (with sunflower [Helianthus annuusL.]), delayed sowing, or a variation in the herbicide application timing are effective under direct drilling to manage herbicide-resistantP. rhoeas. Adoption of IWM strategies is necessary to mitigate the evolution of resistance in both conventional and no-till systems.

CRISPR-Cas systems are bacterial anti-viral systems, and bacterial viruses (bacteriophages, phages) can carry anti-CRISPR (Acr) proteins to evade that immunity. Acrs can also fine-tune the activity of CRISPR-based genome-editing tools. While Acrs are prevalent in phages capable of lying dormant in a CRISPR-carrying host, their orthologs have been observed only infrequently in virulent phages. Here we identify AcrIIA6, an Acr encoded in 33% of virulent Streptococcus thermophilus phage genomes. The X-ray structure of AcrIIA6 displays some features unique to this Acr family. We compare the activity of AcrIIA6 to those of other Acrs, including AcrIIA5 (also from S. thermophilus phages), and characterize their effectiveness against a range of CRISPR-Cas systems. Finally, we demonstrate that both Acr families from S. thermophilus phages inhibit Cas9-mediated genome editing of human cells.

This year marks the tenth anniversary of the identification of the biological function of CRISPR-Cas as adaptive immune systems in bacteria. In just a decade, the characterization of CRISPR-Cas systems has established a novel means of adaptive immunity in bacteria and archaea and deepened our understanding of the interplay between prokaryotes and their environment, and CRISPR-based molecular machines have been repurposed to enable a genome editing revolution. Here, we look back on the historical milestones that have paved the way for the discovery of CRISPR and its function, and discuss the related technological applications that have emerged, with a focus on microbiology. Lastly, we provide a perspective on the impacts the field has had on science and beyond.

Poly(butadiene)- b -poly(2-vinylpyridine)- b -poly(ethylene oxide) (PB P2VP PEO) triblock copolymers of various compositions and molecular weights were prepared by sequential anionic polymerization. Their micellization behavior was examined in heptane, which is a selective solvent for PB whereas P2VP and PEO are insoluble. Dynamic light scattering and viscometry were used to determine the basic micellar characteristics, such as aggregation number, micellar sizes, and polydispersity, which were correlated to the molecular characteristics of the copolymers. Such ABC triblock copolymers form structured micelle-like nanoparticles having a core–shell morphology with hydrodynamic diameters in the range of 45–75 nm.

The tomato borer Tuta absoluta (Lepidoptera: Gelechiidae) is an invasive pest of tomato crops that is rapidly expanding around the world. It is considered a devastating pest and its control heavily relies on application of insecticides. Diamides are a novel class of insecticides acting on insect ryanodine receptors and are highly effective against lepidopteran pests. To date, chlorantraniliprole and flubendiamide have been registered in the market and they have been extensively used to manage T. absoluta. In this study, a survey was conducted in Greece and Italy monitoring diamide resistance. The populations originating from Sicily (Italy) exhibited LC50s that ranged between 47.6–435 for chlorantraniliprole and 993–1.376 for flubendiamide, while for Crete (Greece) LC50s ranged between 0.14–2.45 for chlorantraniliprole and 1.7–8.4 for flubendiamide (LC50s in mg L−1). Comparing this result to the susceptible reference strain, high resistance levels for the Italian populations were detected, i.e., up to 2,414- and 1,742-fold for chlorantraniliprole and flubendiamide, respectively. Resistance ratios for Greek populations were found up to 14-fold for chlorantraniliprole and 11-fold for flubendiamide, suggesting that diamide resistance is low but increasing considering monitoring data over time. Hereby, we report for the first time, cases of resistance development to diamide insecticides in T. absoluta. These findings underline the importance of committing to the resistance management strategies for diamide insecticides.