- Research Article
- 10.1007/s35724-017-0011-5
Flexible system for parts cleaning
- Mar 01, 2017
- IST International Surface Technology
- Mathias Kögel
Publications from 2021 to 2026
Showing 8 of 8 papers
Flexible system for parts cleaning
SMARTKITCHEN Media Enhanced Cooking Environment
This work-in-progress paper describes our project SMARTKITCHEN, an interdisciplinary research project focusing on interactive display deployment in the kitchen - in particular around the cooking area. By applying a user-centered design approach the project aims to examine how screen-based interactive digital media can be accessed naturally in a constrained environment during the cooking process using multimodal interaction. Our main focus is on exploring new directions of supporting social and emotional aspects of the cooking experience. In this work-in-progress paper, we provide an overview on research directions, envisioned use-cases, and used technologies.
Read morePrimär-Sekundär-Analyse
Um die Zielsetzung hoher Produktivitat zu erreichen, ist es unabdingbar, dass der grostmogliche Anteil des Aufwandes im Sinne einer Wertschopfung eingesetzt wird. Ein praktischer Ansatz zur Beurteilung vorhandener und geplanter Arbeitssysteme im Hinblick auf ihre Wertschopfungsanteile ist die Primar-Sekundar-Analyse, die das methodische Fundament des gesamten Buches bildet. Primarvorgange sind wertschopfend im Sine der Produktfertigstellung, Sekundarvorgange tragen nicht zur Wertschopfung bei und bedeuten Verschwendung. Das Kapitel beschreibt die Ausbaustufen des Verfahrens vom einzelnen Arbeitsplatz bis hin zu einer gesamten Fertigung und Montage und zeigt die Anwendung an praktischen Beispielen.
Read moreOptimisation of quasi-resonant induction cookers
In this paper, the optimisation possibilities of a quasi-resonant induction cooker are investigated. Simulations show that main losses of the induction cooker occur in the heating coil and the RC-IGBT (power switch). The performance of the coil can be improved mainly by minimising the coil resistance. The IGBT-optimisation is based on the reduction of tail current in soft switching mode. The tail current is reduced by using lifetime engineering and reduction of the IGBT-thickness. The losses of the optimised IGBT are about 30% lower. As a result, the cooling system of the IGBT can be smaller and cheaper. Together with some optimisations of the circuit the overall losses of the system could be improved by almost 10% or 1 percentage point.
Read moreUmrüstbare Montagezellen Eine Chance für die Flexibilisierung der Kleinteilemontage
Spricht man davon, das zukunftige Rationalisierungspotential der Montage durch Automatisierung auszuschopfen, mus man sich zwangslaufig mit dem Thema „flexible Automatisierung“ befassen. Die starre Montageautomatisierung (Einzweckautomaten) ist auf Grosstuckzahlen beschrankt.
Read moreAssembly technology-No isolated approach
Laser applications for small part assembly
With the development of laser welding technology, welding techniques are increasingly used in automatic assembly machines. The main advantage of laser welding is due to the contactless welding, which largely obviates the need of equipment maintenance.
Read moreSintering and Microstructure Formation of β‐Silicon Carbide
The effect of additions of B, Al, and B + Al on the pressureless sintering of β‐Sic was examined. The influence of the sintering atmosphere and heating schedule on densification behavior, polytype transformation, and microstructure development was also studied. High densities were obtained at 1940°C by the simultaneous addition of B and Al. The decrease in the sintering temperature is attributed to the presence of a liquid phase which results in the formation of platelets (up to 200 # in size) of an α‐polytype, predominantly 4H and 6H. Polytype transformation and exaggerated grain growth could be prevented by annealing the compact at 1650° to 18500°C for 0.5 to 1 h. This procedure results in a better redistribution of the sintering aids, giving a fine‐grained microstructure, constituted primarily of the cubic 3C polytype.
Read more