Ibule Photonics (South Korea)

Recently, there has been a surge of interest in [011]-poled Mn: PIN-PMN-PT piezoelectric single crystals for high-power transducers. These crystals boast impressive electromechanical coupling coefficients, piezoelectric constants in the transverse mode, and excellent heat resistance due to their high mechanical quality factor. To effectively design transducers using these crystals, understanding their material constants is crucial. Our study focused on determining these constants by employing the resonance method. We created eleven different resonators, analyzed their impedance spectra, and derived seventeen elastic compliance, piezoelectric, and dielectric constants. The precision of the obtained material constants was enhanced by minimizing the difference between the impedance spectra found through finite element analyses and actual measurements of each resonator. The accuracy of these derived constants was validated by comparing the impedance spectra obtained from analysis with those measured experimentally. This novel approach demonstrated a capability to derive more precise material constants than prior studies. These refined material constants hold the potential to enable more precise and effective design of acoustic transducers constructed from the single crystals.

The effect of a ferroelectric polarization field on the charge transport in a two-dimensional (2D) material was examined using a graphene monolayer on a hexagonal boron nitride (hBN) field-effect transistor (FET) fabricated using a ferroelectric single-crystal substrate, (1-x)[Pb(Mg1/3Nb2/3)O3]-x[PbTiO3] (PMN-PT). In this configuration, the intrinsic properties of graphene were preserved with the use of an hBN flake, and the influence of the polarization field from PMN-PT could be distinguished. During a wide-range gate-voltage (VG) sweep, a sharp inversion of the spontaneous polarization affected the graphene channel conductance asymmetrically as well as an antihysteretic behavior. Additionally, a transition from antihysteresis to normal ferroelectric hysteresis occurred, depending on the V(G) sweep range relative to the ferroelectric coercive field. We developed a model to interpret the complex coupling among antihysteresis, current saturation, and sudden conductance variation in relation with the ferroelectric switching and the polarization-assisted charge trapping, which can be generalized to explain the combination of 2D structured materials with ferroelectrics.

A self-powered artificial pacemaker is demonstrated using a high-performance flexible piezoelectric PMN-PT thinfilm energy harvester. As reported by K. J. Lee and co-workers on page 4880, a PMN-PT harvesting device can convert slight mechanical movements to high electric power and provides functional electrical stimulation of a living heart.