Institute of Soil Science and Plant Cultivation

Agroforestry, where trees and shrubs are planted in row-alley systems, can utilize the natural ability of plants to interact with pollutants and serve as a passive biotechnological method for improving air quality. A method for programming air phytoremediation processes is presented, using appropriately shaped plant structures, considering species characteristics and the spatial configuration of plants in row-alley plantings. The main objectives of this study were: to determine the relationship between pollution reduction and the characteristics of plant communities, considering the parameters of individual plants and group characteristics, to determine strategic parameters for the interaction between plants and pollutant flows, and to identify optimization paths for each stage. The optimization of the air phytoremediation process is presented using the example of changes in the fine particulate matter (PM2.5) concentration pattern, analyzed through numerical experiments using micrometeorological computational fluid dynamics models (ENVI-met software). Ex-ante analysis of hypothetical scenarios showed that introducing appropriate configurations of variable vegetation structure could lead to pollution reductions of up to 19%. The effectiveness of the presented plant systems qualifies this method as a type of bioengineering technology, supporting the multifunctionality of agroforestry systems.

Abstract Monitoring drought helps to reduce their economic and environmental impacts by enabling early warnings and better resource management planning. In Europe, there are several operational monitoring systems operating at national and regional scales. However, such monitoring systems are rarely validated, which complicates the decision-making process. Therefore, we evaluated six national drought monitoring products in Central Europe using a novel extreme event impact database compiled from national newspaper reports over the period 2000–2023. The drought monitoring indices used in the countries include the standardized precipitation index (SPI), standardized precipitation evapotranspiration index (SPEI), and standardized relative soil moisture with different aggregation periods. The area under receiver-operating characteristic curve (AUC) is used to assess the ability of the drought indices to detect impact occurrence. Spearman correlation coefficients (r) between the severity of the drought index and the number of reported impacts are used to assess their ability to capture impact severity. The highest AUC values were obtained for the drought monitoring products of Czechia, Croatia, and Slovenia ( $$AUC>0.8$$ A U C > 0.8 ) while the lowest values were obtained for the monitoring product of Austria ( $$AUC<0.7$$ A U C < 0.7 ). Impact severity was best captured in Poland (for some indices $$r>0.6$$ r > 0.6 ), and worst in Slovakia, Slovenia, and Austria ( $$r<0.4$$ r < 0.4 ). With an increasing aggregation period, the correlation generally decreases, while the AUC values show a non-linear pattern, peaking at an intermediate integration time of three to 6 months. The results of this study help to understand the strengths and weaknesses of drought monitoring products in each country and support the development of a common drought monitoring framework for Central Europe.

This study aims to assess how climate change will affect the intensity of soil erosion in the Vistula River basin by the mid-21st century. A simulation framework based on the SWAT–MUSLE model was applied, calibrated, and validated against observed streamflow data and driven by climatic forcings from the EURO-CORDEX ensemble (the RACMO22E, HIRHAM5, and RCA4 models forced by EC-EARTH GCM) under the RCP 4.5 and RCP 8.5 scenarios. Simulations were conducted at a daily time step for the years 2021–2050 and compared to the reference period 2013–2018. The analysis included the decadal and seasonal aggregation of the sediment yield (SYLD, t ha−1 yr−1). The results indicate that, relative to the baseline value (~1.84 t ha−1 yr−1), the SYLD increases under both scenarios. In RCP 4.5, the rise culminates during 2031–2040 and then stabilizes in 2041–2050. Under RCP 8.5, a continuous upward trend is observed, with the highest values projected for 2041–2050, particularly for the HIRHAM5 realization. The largest relative increases occur in summer (JJA) and, in the final decade, also in autumn (SON); in the early horizon, autumn may locally exhibit declines that later shift to increases. The spread among RCM realizations remains significant and should be interpreted as an expression of projection uncertainty. The practical implications include prioritizing soil protection measures in sub-catchments with high LS factors and soils susceptible to water erosion, strengthening runoff and sediment control in summer, and planning maintenance of small-scale retention infrastructure. Study limitations arise from the inherent structure of the MUSLE model, bias correction procedures for climate data, and the representation of extreme events. Therefore, greater emphasis is placed on the direction and seasonality of changes rather than absolute numerical values.

Cities and nature are interdependent. Many of the needs of urban population are fulfilled by ecosystem services, which are typically grouped into four categories: provisioning, regulating, habitat, and cultural services. These include such benefits as food and water supply, climate regulation, biodiversity support, as well as various cultural and recreational values. Soil, through its functions, is an important element of the environment that provides ecosystem services in urban areas. This publication focuses on a review of the literature on soil ecosystem services, with particular emphasis on the urban context. It also highlights how remote sensing tools and spatial planning approaches can be applied to monitor soil ecosystem services in cities and support sustainable urban management. The increasing level of urbanization poses a major threat to soil and its ability to provide ecosystem services. Urbanization worsens climatic conditions in cities, threatens biodiversity by interrupting ecological corridors, increases surface runoff creating flood risks, and contributes to elevated levels of pollution in both soil and air. Given that this process is inevitable, minimizing environmental damage requires well-designed land management approaches. Integrating ecosystem services into urban planning will not only contribute to preserving nature in the best possible condition, but will also enhance the quality of life for city dwellers.

Both the agricultural production space and agricultural production in Poland are characterized by significant diversity. Common Agricultural Policy (CAP) instruments are a key political element shaping agriculture. The aim of this study was to assess the spatial diversity of Agri-Environmental Program (AEP) implementation during the 2007-2013 programming period, which was implemented in Poland from 2008 to 2014. The study covered 130,618 farms implementing the Agri-Environmental Program (AEP) and was conducted at the level of 314 rural districts (powiats). Data on AEP used in the study came from the Ministry of Agriculture and Rural Development (MRiRW) – the Managing Authority of the Rural Development Programme 2007-2013. In addition, the study utilized data from the Central Statistical Office (GUS). The surveyed farms differed in terms of their natural and organizational production conditions, as well as the area of AEP commitments implemented. This was confirmed by the identification of three cluster groups for the analyzed districts. The first cluster included counties located mostly in the northern and western voivodeships. The second cluster consisted primarily of counties in central, eastern, and partially southern Poland. The third cluster included counties located primarily in the southeastern part of the country.

The aim of the study was to determine the effect of cultivar and nitrogen fertilization on the morphological and physiological traits and yield of soybean (Glycine max (L.) Merrill) grown in central-eastern Poland. In a strict, two-factor field experiment, four soybean cultivars were used: ‘Abelina’, ‘Malaga’, ‘Coraline’, and ‘Petrina’, and three nitrogen rates: 0, 30, and 60 kg N ha−1. The moderate rate (N30) was applied before sowing, while the higher rate (N60) was divided into two parts, with 50% applied before sowing and 50% top-dressed at BBCH 61. The studies were conducted during two growing seasons. It was shown that both the cultivar and nitrogen fertilization significantly affected plant height, leaf area index (LAI), leaf greenness index (SPAD), and chlorophyll fluorescence indices (Fv/Fm, PI). The interaction among cultivar, fertilization, and years was significant for SPAD and Fv/Fm index, indicating a strong influence of environmental factors on plant response. Nitrogen fertilization increased plant height and chlorophyll content but reduced fluorescence indices. Among the cultivars studied, the late-season cultivar ‘Malaga’ was characterized by the highest SPAD index (502), Fv/Fm (0.800), and PI values (4.3), and achieved the highest seed yield (5.06 t ha−1) and thousand-seed weight (230 g). In contrast, the medium-season cultivar ‘Abelina’ showed the lowest SPAD (454), and significantly lower Fv/Fm and PI values (0.790 and 3.51, respectively), resulting in the lowest yield (4.25 t ha−1) and TSW (169.7 g). The application of a moderate rate of nitrogen (N30) improved the physiological indicators of plants and elements of yield structure without reducing the potential photochemical efficiency of PSII, while a higher rate (N60) did not result in a significant increase in yield, despite a greater number of pods and seeds per plant, which may have been due to a reduction in thousand-seed weight. The results highlight the importance of cultivar selection and moderate N fertilization of soybean grown in temperate climates and indicate the need for further research on the physiological mechanisms that determine cultivar-specific nitrogen use efficiency and yield stability under environmental stress.

This study evaluated the production potential of M. sacchariflorus and M. giganteus depending on plantation age and soil type. The analyses showed that the leaf area index was dependent on the Miscanthus genotype, soil type, and plantation age. The mean leaf angle, on the other hand, was mainly affected by plantation age. Significant differences in plant height were found, resulting from genotype, soil type, and plantation age. The biomass yield obtained from Miscanthus plantations was also dependent on soil type, plantation age, and genotype. The biomass moisture content was to a lesser extent affected by the interactions between genotype and soil type, and between soil type and plantation age, but it was dependent on the interaction between genotype and plantation age. The calorific value of the tested biomass was mainly influenced by the Miscanthus genotype and, to a lesser extent, by plantation age and soil type. The highest calorific value was found in the biomass of M. sacchariflorus, regardless of soil type and plantation age, while the lowest was recorded for M. giganteus biomass, irrespective of soil type.

The paper presents the results of heavy metals (Ni, Cr, Pb, Cd, Zn and Cu) and natural radioactive isotopes (238U, 226Ra, 232Th and 40K) in phosphate and compound fertilisers produced in Poland. Heavy metals in the mineral fertilisers were determined by atomic absorption spectrophotometry in the acetylene-air flame. The content of natural radioactive isotopes was determined using gamma-ray and alpha spectrometry techniques. The average heavy metal content of the tested fertilisers was 154 ± 17, 154 ± 30, 5.43 ± 0.43, 7.87 ± 1.95, 197 ± 19 and 26 ± 7mg·kg- 1 for Ni, Cr, Pb, Cd, Zn and Cu, respectively. Whereas, the average concentrations of natural radioactive isotopes in the studied samples for 238U, 226Ra and 40K were respectively in the range of 715 ± 259, 549 ± 170 and 2472 ± 759Bq·kg- 1, and were higher than their average content in the Earth's crust, in contrast to the average concentration of the 232Th isotope (12 ± 2Bq·kg- 1) in the tested samples compared to the average concentration in the Earth's crust. To assess the health exposure of people in direct contact with fertilisers (factory workers, people working in fertiliser loading and unloading, transporters, storekeepers or farmers), basic radiological protection parameters such as radium equivalent activity (Raeq), outdoor dose rate (Dout), indoor dose rate (Din), annual outdoor effective dose and annual indoors effective dose (Eout and Ein) and total annual effective dose (Etot) were determined. It was observed that the calculated radiological hazard parameters for all samples exceeded the worldwide average values.

Cereal-based plant beverages have gained attention as functional ingredients in bakery formulations, offering both nutritional and technological benefits. Replacing water with these beverages may improve the nutritional value of bread by increasing its fiber and unsaturated fatty acid content, while also introducing functional components that affect dough rheology and bread texture. This study examined the effects of substituting water with oat (BO), millet (BM), and spelt (BS) beverages in wheat bread formulations at 25%, 50%, 75%, and 100% levels. Thirteen bread variants were prepared: one control and four substitution levels for each of the three cereal-based beverages, using the straight dough method, with hydration adjusted according to farinograph results. Farinograph tests showed increased water absorption (up to 64.5% in BO100 vs. 56.9% in control) and improved dough stability (10.6 min in BS100). Specific bread volume increased, with BS75 reaching 3.52 cm3/g compared to 3.09 cm3/g in control. Moisture content remained stable during storage, and crumb hardness after 72 h was lowest in BO100 (9.5 N) and BS75 (11.5 N), indicating delayed staling. All bread variants received favorable sensory ratings, with average scores above 3.75 on a 5-point scale. The highest bread yield (149.8%) and lowest baking loss (10.9%) were noted for BS100. Although BO breads had slightly higher fat and energy content, their nutritional profile remained favorable due to unsaturated fatty acids. Overall, oat and spelt beverages demonstrated the greatest potential as functional water substitutes, improving dough handling, shelf-life, and sensory quality while maintaining consumer appeal.