- Research Article
- 10.1681/asn.2025c7g4gn5j
Plasma and Urine Potassium (K+) Changes After Single Subcutaneous (SC) Injection of Novel Formulation of Furosemide (FUR)
- Oct 01, 2025
- Journal of the American Society of Nephrology
- Harry Alcorn + 5 more +5
Publications from 2021 to 2026
Showing 9 of 9 papers
Plasma and Urine Potassium (K+) Changes After Single Subcutaneous (SC) Injection of Novel Formulation of Furosemide (FUR)
A Method to Determine Bubble Distribution in Liquid Using Data of Inverse Acoustical Scattering
Abstract Information on bubble distributions in liquids is required for various applications. Employment of inverse acoustic scattering is the usual path to determine these distributions. This path is based on solving a Fredholm first kind integral equation leading to an ill-posed mathematical problem. The usual regularization methods for such a problem are quite complex and require introduction of some tuning parameters. Meanwhile, as shown in this paper, another method works well for media, where acoustic waves propagate with the small losses. This method is based on extraction of a singular Cauchy integral in the above-mentioned equation and of the further inversion of this integral. Such a regularization via inversion is a simple operation that gives numerically stable solutions. Here this regularization is described, verified using the method of manufactured solutions and validated with the well-known already published experimental data.
Read moreSTATE-OF-THE ART IN COMPUTATIONAL ANALYSIS OF CAVITATION INCEPTION AND ITS SCALE EFFECTS
Mathematical analysis of cavitation inception is an important topic for naval engineering, but several circumstances make it difficult. First, cavitating flows are substantially multi-zone flows, where the appearing cavities are incomparably smaller than a cavitating body is. Second, inception is substantially influenced by characteristics of the inflow and of the body surfaces. Third, validation of employed mathematical methods by comparison with experimental data is a non-trivial task because of the complexity of experiments themselves and scale effects. This paper is emphasized on multi-zone quasi-steady approaches for prediction of cavitation inception and desinence numbers. The obtained computational results are compared with the known experimental data for sheet cavitation, vortex cavitation and cavitation behind surface irregularities. Procedures of scaling of cavitation inception number and the eventual combinations of various CFD solvers are also discussed.
Read moreПрогнозирование объема каверн на вращающихся лопастях и масштабные эффекты
Object and purpose of research. Pressure pulsations induced by cavitating blades substantially contribute to flowinduced loads and amplify structural vibration. These pulsations depend on oscillation of the volume of cavities over blades. Prediction of them usually involves model tests and there are three kinds of scale effects influencing the cavity volumes. The first one is associated with the non-uniform inflows. The second one is associated with the combined influence of the blade boundary layer and surface tension on the cavity surface. The third one is associated with the cavity buoyancy. Materials and methods. Because of complexity of blade flows, a qualitative analysis of similar unsteady non-uniform flows around 3D hydrofoils is useful. This paper presents such an analysis for a hydrofoil with the sections copied from a marine propeller blade. The inflows correspond to the wakes of a ship and of her model. Computations carried out using an analysis of viscous-inviscid interaction. Main results. The qualitative explanation of observed trends and scale effects is obtained due to this analysis. In particular, the role of pressure side cavitation in full scale conditions is pointed out. Conclusion. The difference of model and ship wakes results in the substantial difference in blade section angles of attack at the same blade loading. Therefore, in model tests the suction side cavitation is more extensive, whereas the pressure side cavitation may not appear, though it exists on full-scale ship propeller blade. This substantial scale effect has been usually out of previous considerations.
Read moreSelection of Gas-Based Drag Reduction Technology
Drag reduction in water has been a goal of numerous efforts based on different technologies. The gas-based drag reduction technologies include supercavitation, partial cavitation and microbubble ejection. The objective of this study is to clarify the vehicle speed and size ranges for the technology effective application. The provided analysis is based on both our results and publications by other authors. Cavitation can reduce drag because a surface under the cavity is practically free of friction. Usually, there is also a significant drag penalty to create a cavity. For supercavitation, this drag becomes smaller than friction reduction only for extremely low cavitation numbers (less than 0.06). Ventilation would be necessary to maintain such cavitation numbers at speed around 100 knots, but there is no confident basis for any forecast: Model test data on air supply to supercavities are affected by flow blockage and a reasonable scaling law for air flux was not found yet. For partial cavitation, there are the possibilities to have no drag penalty and to achieve a total drag reduction in moderate ranges of cavitation number. The penalty-free partially cavitating flow can exist with suppression of cavity pulsation by a pressure gradient downstream of cavity tail. A 25%–30% drag reduction by partial cavitation was measured in model tests with our specially designed hydrofoil (in a water tunnel at the University of Minnesota) and in sea with a 100-ton boat. The friction reduction is proportional to areas covered by cavities. The attainable cavity lengths and covered areas depend on the vehicle speed. Requesting moderate air supply rates at design conditions, partial cavitation looks as the most promising and widely applicable drag reduction technology. Oppositely to supercavitation, microbubble drag reduction decreases with flow speed (the best results were obtained at 4.7m/s) and its effect critically depends on the surface orientation. An opportunity to apply this technology may exist for slow flat-bottom ships.
Read moreTwo-range scaling for tip vortex cavitation inception
High-Speed Trimaran Drag: Numerical Analysis and Model Tests
A numerical technique for high-speed trimaran resistance calculation is developed. The technique is based on the modified viscous-inviscid interaction concept and quasi-linear theory of wave resistance (Amromin et al 1984). The key element of this technique, which is called modified quasi-linear theory (MQLT), is an account of Froude number influence on the ship trim, transom drag, and wetted surface. This influence leads to appearance of a drag component that significantly depends on both Reynolds number and Froude number. This component has been traditionally included in residuary drag in the model test data. The presented preliminary numerical results were obtained with simplifications of the boundary layer theory that are acceptable for slender hulls. Calculated drag is in sufficient accordance with results of model tests. The MQLT computations of boundary layers are also compared with the Reynolds averaged Navier-Stokes (RANS) calculations(one-equation turbulence model by Spalart and Allmaras 1992) at model and ship scale Reynolds numbers. An analysis of the model-ship scale correlation factor for high-speed slender hulls with transom sterns and diverse mutual position of the trimaran hulls is done.
Read moreQuasi-Linear Theory of Ship Wave Resistance and CFD Analysis of Ship’s Environmental Impact
Quasi-linear theory (QLT) introduces corrections to the Havelock integral and makes it possible to operate with realistic wave amplitudes and length into framework of linear theory. These corrections for wave amplitude and length are based on implicit employment of the model 2D problems for nonlinear waves of highest magnitude (Stokes waves). There is both description of algorithms and comparison with towing test results for diverse ships here. A substantially novel (and environmentally important) aspect of this paper is application of QLT to computation of ship wave resistance in shallow waters.
Read moreVIBRATION OF CAVITATING ELASTIC WING IN A PERIODICALLY PERTURBED FLOW: EXCITATION OF SUBHARMONICS