- Research Article
19
- 10.1016/j.cscm.2022.e00968
Effect of fiber type and content on the performance of extruded wood fiber cement products
- Feb 22, 2022
- Case Studies in Construction Materials
- Roz-Ud-Din Nassar + 6 more +6
Publications from 2021 to 2026
Showing 9 of 9 papers
Effect of fiber type and content on the performance of extruded wood fiber cement products
ENHANCEMENT OF CONCRETE PIPES THROUGH REINFORCEMENT WITH DISCRETE FIBERS

 
 
 An industrial-scale production and experimental investigation was conducted in order to evaluate the constructability and structural performance of different concrete pipes incorporating discrete synthetic fibers. The results indicated that synthetic fibers enable design of plain concrete pipes with a desired balance of strength and ductility. Analytical models were developed for predicting the load-carrying capacity of concrete pipes without steel reinforcement that are reinforced with discrete fibers.
 
 
Read moreEvaluation of the Energy-Efficiency of an Aerated Slurry-Infiltrated Mesh Building System with Biomass-Based Insulation
Carbon dioxide use in beneficiation of landfilled coal ash for hazardous waste immobilization
Mechanical properties of aerated cement slurry-infiltrated chicken mesh
Tailoring Cementitious Materials Towards Value-Added Use of Large CO<sub>2</sub> Volumes
A novel method was developed for the use of carbon dioxide as a raw material in production of hydraulic cements.The solid raw materials were selected to produce a chemistry that is amenable to the formation of alkali aluminosilicate hydrates and carbonates.These raw materials were first pelletized using a relatively low moisture content in the presence of carbon dioxide gas.The resulting pellets were then subjected to milling action in the presence of carbon dioxide in order to mechanochemically transform them into a hydraulic cement comprising largely of alkali aluminosilicates and metastable carbonates.Hydration of this hydraulic cement produces an integrated binder comprising largely of alkali aluminosilicate hydrates and finely dispersed crystalline carbonates.Analytical chemistry and physical test methods were employed in order to evaluate the composition and properties of pellets and the resultant hydraulic cement.The CO2 uptake of the cement was measured at about 10 wt.%, which was raised with increasing milling duration in a carbon dioxide environment.The composition of the hydraulic cement was refined to further increase the use of abundant and market-limited industrial byproducts as raw materials, and to produce a balance of performance characteristics that meet standard requirements.Concrete materials were prepared with the hybrid hydraulic cement developed in the project, and were thoroughly characterized.The hydraulic cement formulation was further refined in order to produce concrete materials with desired deicer salt scaling resistance.The fresh mix attributes of the hybrid cement concrete were thoroughly characterize in order to evaluate its rheological characteristics, bleeding and plastic shrinkage cracking resistance.The resultant concrete was found to produce mechanical, physical and durability characteristics that were superior to those of conventional Portland cement concrete.The fresh mix rheology, bleeding and plastic shrinkage cracking resistance of the hybrid cement concrete were found to be compatible with the mainstream construction practices.Scalability and compatibility with industrial-scale practices are key to the commercial success of the new class of hydraulic cements developed in this project.These attributes cannot be easily assessed in laboratory-scale investigations.Energy-based models were developed to enable scale-up of the process.Pilot-scale implementation of the process in a power plant was successful.Theoretical analyses complemented with pilotscale experimental investigations indicated that the transformation from laboratory-to pilot-scale mechanochemical processing can reduce the milling duration by up to 85%.The data produced in pilot-scale processing of the hydraulic cement was used to assess the net carbon footprint of the resultant binder, which was found to be negative due to uptake of carbon dioxide in the process.The energy content of the new hydraulic cement was significantly below that of Portland cement, and it also offered favorable economics.Significant support has been raised for industrial-scale demonstration and commercialization of the technology.A theoretical framework was established based on thermodynamic and diffusion principles to explain the mechanochemical capture and value-added use of carbon dioxide in hydraulic cement production.
Read moreUse of non-wood biomass combustion ash in development of alkali-activated concrete
Tailoring Cementitious Materials Towards Value-Added Use of Large CO2 Volumes
The main thrust of the project is to develop scalable, economical and convenient methods of delivering carbon dioxide to concrete, and to tailor the chemistry of concrete to make beneficial use of large carbon dioxide volumes towards achieving enhanced performance, economic, sustainability and energyefficiency attributes.Concrete materials incorporating two different inorganic binders based on calcium silicate hydrate (Portland cement) and alkali aluminosilicate hydrate (geopolymer) were considered in the project.The novel method of carbon dioxide delivery developed in the project involves mechanosorption into cementitious materials during their size reduction.The mechanosorbed carbon dioxide becomes available during production of concrete to induce carbonation reactions which enhance concrete properties and also sequester carbon dioxide.Experimental evidence was produced for mechanosorption (mechanochemical binding) of carbon dioxide into iron slag and Portland cement, the amorphous and reactive nature of the carbonates formed via mechanosorption, and their contributions towards enhancement of concrete material properties by inducing carbonation reactions.It was shown that mechanosorption of carbon dioxide can be accomplished by simple modification of the existing milling step in production of cementitious materials.An alternative carbon dioxide delivery method was also considered where curing of concrete products was performed in carbon dioxide.A host of additives were considered to enhance the sorption of carbon dioxide, dissolution of cementitious minerals in aqueous media, carbonation reactions, and co-precipitation of hydrates and carbonates for concrete production.Experimental investigations were conducted to identify the additives which offer the greatest promise for enhancing the carbon dioxide sequestration and the beneficial effects of carbonation reactions on concrete materials with different binder chemistries.The results confirmed that tailoring the chemistry of inorganic binders to suit carbon dioxide mechanosorption and carbonation reactions yields significant benefits.Optimization experimental investigations were undertaken with selected additives to further enhance the economics, environmental and performance benefits of the process.The optimum concrete materials incorporating chemically bound carbon dioxide were thoroughly characterized.The test results demonstrated the potential to raise the carbon dioxide sequestration of concrete, and to pronounce the consequent gains in the mechanical, barrier and durability characteristics of concrete.Analytical chemistry and theoretical methods were employed to provide insight into the mechanochemical binding of carbon dioxide, the mechanisms through which carbonation reactions enhance concrete properties, and the impacts of additives on the process.Initial and life-cycle environmental, economic and energy analyses were undertaken.The outcomes of these analyses demonstrated the value of the approach in sequestering significant quantities of carbon dioxide can to induce carbonation reactions which improve diverse material properties of concrete, and significantly lower the energy content and cost of concrete production.The project outcomes offer commercially viable means of transforming concrete, the most widely used material of construction, from a major source of carbon dioxide emission and energy consumption into a valuable resource for large-volume carbon dioxide sequestration.The technology promises to significantly enhance the structural efficiency, service life, sustainability, economics and energy-efficiency of the concrete-based infrastructure.
Read moreMonitoring of Sulfate Attack in Concrete by Al27 and Si29 MAS NMR Spectroscopy
Si29 and Al27 magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy techniques were employed towards evaluation of hydrated cement paste and concrete subjected to accelerated sulfate attack. Quantitative analyses of the Si29 NMR spectra of specimens subjected to different periods of sulfate attack indicated that the chain length CL of SiO4/AlO4 tetrahedra was lowered by sulfate attack. Al27 NMR spectra indicated that sulfate attack produced a significant rise in the intensity of ettringite and a sharp drop in the concentration of monosulfate hydrate, which are some primary indications of sulfate attack on concrete. Fourier-transform infrared (FTIR) spectroscopy method was employed in order to verify the result of NMR spectroscopy.
Read more