- Research Article
4
- 10.1016/j.engappai.2025.112472
Physics-driven prior learning-based deep unrolling for underwater image enhancement
- Dec 01, 2025
- Engineering Applications of Artificial Intelligence
- Thuy Thi Pham + 3 more +3
Publications from 2021 to 2026
Showing 6 of 6 papers
Physics-driven prior learning-based deep unrolling for underwater image enhancement
Influence of laser polishing and chemical etching on surface roughness, microstructure, and hardness of as-built Ti-5Al-5Mo-5V-3Cr alloy produced by laser powder bed fusion
Ti-5Al-5Mo-5V-3Cr (Ti-5553) parts are used in aerospace applications due to their excellent mechanical and corrosion resistance properties. However, to use additively manufactured Ti-5553 components effectively, surface quality must be improved. This study demonstrates the effective use of laser polishing on laser powder bed fusion (LPBF)-manufactured Ti-5Al-5Mo-5V-3Cr (Ti-5553) parts, resulting in a significant reduction in surface roughness. Initial laser polishing reduced the surface roughness (Sa) from 17.4 to 4.9 μm, with subsequent chemical etching further lowering it to 4.1 μm. Across all tested conditions, Sa values remained within an acceptable range, from 4.9 to 9.7 μm. Microstructural analysis after laser polishing revealed characteristic wave patterns with some discontinuities, while chemical etching made the grain boundaries more visible. A slight reduction in hardness in the laser-polished samples suggests stress relief in the as-built samples, and transmission electron microscopy investigation confirmed that no phase transformation occurred at the polished surface. These findings underscore the effectiveness of laser polishing in enhancing the surface quality of LPBF-manufactured Ti-5553 parts for various applications.
Read moreService Times and Capacity at National Park Entrance Stations
As many recreational tourists know, long queues of vehicles at park entrance stations during peak season are a problem for many national parks and monuments. In some instances, on holiday weekends the lines are known to extend 1 mi or more. Information is presented on the capacity of entrance stations as determined from data collected at Arches National Park in Utah, supplemented by data collected at Grand Canyon National Park. At Arches National Park the capacity of an entrance station lane is 112 vehicles per hour. This value can be used as a general guide by other parks. The service time per vehicle at a park entrance station will vary from park to park depending on ( a) the proportion of visitors who hold a previously purchased pass (short transaction time), ( b) the amount of printed information and safety advisories given to the visitor, ( c) the proximity of a visitor center at which the visitor can ask questions, and ( d) other factors. The capacity of an entrance station lane is important and useful information to the National Park Service for analyzing the number of needed lanes at an entrance station, the benefits of a lane dedicated to automated entry, and other possible solutions to the queuing problem. A number of national parks have implemented automated lanes at entrance stations. An overview of the operation of automated lanes also is provided.
Read morePreserving dirt-walled structures in Mesa Verde National Park
The authorities at Mesa Verde National Park have been building and managing temporary and permanent shelters over excavated mesa-top archaeological sites since 1919. Over twenty shelters have been built over the years. These have varied from informal vernacular constructions to structures designed by professional architects for the specific needs of the Park. There are presently twelve shelters in the Park. Two of the existing twelve shelters are informal 'temporary' shelters built by Park staff and are over sites that are not on exhibit to the public. The other ten shelters are over sites on exhibit and were designed by professional architects. One is of metal and was built in 1969. The other nine shelters are constructed of precast concrete with a wooden roof, built in 1984–87. The professionally designed shelters have been fairly successful in protecting the sites that they cover. In 2000 a wildfire damaged four shelters in its path but the archaeology protected by these shelters was undamaged.
Read moreStone Age on the Columbia River. Emory Strong, Binfords and Mort, Portland, 1959. 254 pp., 107 figs, endpaper map. $3.95.
An abstract is not available for this content so a preview has been provided. Please use the Get access link above for information on how to access this content.
Read moreExcavation of Mesa Verde Pit Houses
During the autumn of 1941, excavations in Modified Basketmaker sites in Mesa Verde National Park were carried on, for the twin purposes of clearing well-preserved pit houses that could be used in the interpretative program of the park and of adding to the meager amount of information on Modified Basketmaker culture in the park area. Although this period has been studied extensively in adjacent districts, little work has been done on it in the Mesa Verde.
Read more