Oasen (Netherlands)

Microbial contamination in building plumbing systems poses significant risks to public health at the point of use. Stagnation and warm temperatures are well-known drivers of microbial regrowth, but the effects of common short-term stagnation in touchless sensor faucets—widely used for hygiene and comfort—remain poorly understood. Here we show that microbial water quality in touchless sensor faucets changes during short-term stagnation (0.25–10 h) at varying temperatures (10, 30, and 40 °C). We identify two pivotal time points—2 and 4 h—where microbial diversity decreases and Legionella pneumophila concentrations increase significantly, driven by accelerated chlorine decay and biofilm contributions. Heating to 30 °C maximizes microbial biomass (measured as ATP) but minimizes L. pneumophila proliferation, whereas 40 °C reduces biomass while promoting L. pneumophila growth. These findings reveal a temperature-dependent microbial water quality guarantee period of 2–4 h, beyond which flushing is necessary to mitigate health risks. Optimizing faucet temperatures between 30 and 40 °C could balance microbial safety, user comfort, and energy efficiency, offering practical guidance for managing water quality in modern plumbing systems.

Pipe materials appear to play an important role in the development of biofilms in drinking water distribution systems. However, there is controversy as to whether pipe materials shape the composition and diversity of bacterial communities in biofilms. To investigate the long-term effects of pipe materials on biofilms, triplicate samples of mature biofilms on unplasticized polyvinyl chloride (PVC-U), grey cast iron and asbestos cement (pipe age > 40 years) were obtained from three areas of an unchlorinated drinking water distribution system in the Netherlands. Illumina sequencing was performed and 773 OTUs (730 OTUs-814 OTUs) were detected within the biofilms on the three pipe materials, all of which were dominated by Proteobacteria (36.2%-46.1%). Both the alpha and beta diversity results showed that the bacterial communities of the biofilms formed on different pipe materials were highly similar. The neutral community model revealed that the assembly of the biofilm communities was governed by environmental selection rather than neutral processes. Among the 142 shared OTUs between the water and biofilm samples, there were 25 enriched OTUs (e.g., OTU7, assigned as Nitrospira spp.), which accounted for 62.6% of the total sequences, while 16 OTUs were disadvantaged (e.g., OTU14 and OTU40, assigned as Hyphomicrobiaceae), accounting for 2.2% of the sequences. Based on the findings, we propose and discuss a harmonisation process by which biofilms with significant differences due to the pipe material harmonize over time resulting in biofilms with similar bacterial communities. Our findings provide valuable insights into long-term biofilm development, bridging an essential gap in our current understanding of the influence of pipe materials on biofilm communities. These findings also highlight the importance of long-term studies and point to a potentially masked harmonizing process during biofilm development over years/decades.

The textile industry discharges up to 5 % of their dyes in aqueous effluents. Here, use of spent mushroom substrate (SMS) of commercial white button mushroom production and its aqueous extract, SMS tea, was assessed to remove textile dyes from water. A total of 30–90 % and 5–85 % of the dyes was removed after a 24 h incubation in SMS and SMS tea, respectively. Removal of malachite green and remazol brilliant blue R was similar in SMS and its tea. In contrast, removal of crystal violet, orange G, and rose bengal was higher in SMS, explained by sorption to SMS and by the role of non-water-extractable SMS components in discoloration. Heat-treating SMS and its tea, thereby inactivating enzymes, reduced dye removal to 8–58 % and 0–31 %, respectively, indicating that dyes are removed by both enzymatic and non-enzymatic activities. Together, SMS of white button mushroom production has high potential to treat textile-dye-polluted aqueous effluents.

Although simulated studies have provided valuable knowledge regarding the communities of planktonic bacteria and biofilms, the lack of systematic field studies have hampered the understanding of microbiology in real-world service lines and premise plumbing. In this study, the bacterial communities of water and biofilm were explored, with a special focus on the lifetime development of biofilm communities and their key influencing factors. The 16S rRNA gene sequencing results showed that both the planktonic bacteria and biofilm were dominated by Proteobacteria. Among the 15,084 observed amplicon sequence variants (ASVs), the 33 core ASVs covered 72.8 %, while the 12 shared core ASVs accounted for 62.2 % of the total sequences. Remarkably, it was found that the species richness and diversity of biofilm communities correlated with pipe age. The relative abundance of ASV2 (f_Sphingomonadaceae) was lower for pipe ages 40–50 years (7.9 %) than for pipe ages 10–20 years (59.3 %), while the relative abundance of ASV10 (f_Hyphomonadaceae) was higher for pipe ages 40–50 years (19.5 %) than its presence at pipe ages 20–30 years (1.9 %). The community of the premise plumbing biofilm had significantly higher species richness and diversity than that of the service line, while the steel-plastics composite pipe interior lined with polyethylene (S-PE) harbored significantly more diverse biofilm than the galvanized steel pipes (S-Zn). Interestingly, S-PE was enriched with ASV27 (g_Mycobacterium), while S-Zn pipes were enriched with ASV13 (g_Pseudomonas). Moreover, the network analysis showed that five rare ASVs, not core ASVs, were keystone members in biofilm communities, indicating the importance of rare members in the function and stability of biofilm communities. This manuscript provides novel insights into real-world service lines and premise plumbing microbiology, regarding lifetime dynamics (pipe age 10–50 years), and the influences of pipe types (premise plumbing vs. service line) and pipe materials (S-Zn vs. S-PE).

The bacterial growth potential (BGP) of drinking water is widely assessed either by flow cytometric intact cell count (BGPICC) or adenosine triphosphate (BGPATP) based methods. Combining BGPICC and BGPATP measurements has been previously applied for various types of drinking water having high to low growth potential. However, this has not been applied for water with ultra-low nutrient content, such as remineralised RO permeate. To conduct a sound comparison, conventionally treated drinking water was included in this study, which was also used as an inoculum source. BGPICC, BGPATP, intact cell-yield (YICC), and ATP-yield (YATP) were determined for conventionally treated drinking water (Tap-water) and remineralised RO permeate (RO-water). In addition, both BGPICC and BGPATP methods were used to identify the growth-limiting nutrient in each water type. The results showed that the BGPICC ratio between Tap-water/RO-water was ∼7.5, whereas the BGPATP ratio was only ∼4.5. Moreover, the YICC ratio between Tap-water/RO-water was ∼2 (9.8 ± 0.6 × 106 vs. 4.6 ± 0.8 × 106 cells/µg-C), whereas the YATP ratio was ∼1 (0.39 ± 0.12 vs. 0.42 ± 0.06 ng ATP/µg-C), resulting in a consistently higher ATP per cell in RO-water than that of Tap-water. Both BGPICC and BGPATP methods revealed that carbon was the growth-limiting nutrient in the two types of water. However, with the addition of extra carbon, phosphate limitation was detected only with the BGPICC method, whereas BGPATP was not affected, suggesting that a combination of carbon and phosphate is essential for biomass synthesis, whereas carbon is probably utilised for cellular activities other than cell synthesis when phosphate is limited. It was estimated that the intact cell-yield growing on phosphate would be 0.70 ± 0.05 × 109 cells/µg PO4-P.

The historic emissions of polar micropollutants in a natural drinking water source were investigated by nontarget screening with high-resolution mass spectrometry and open cheminformatics tools. The study area consisted of a riverbank filtration transect fed by the river Lek, a branch of the lower Rhine, and exhibiting up to 60-year travel time. More than 18,000 profiles were detected. Hierarchical clustering revealed that 43% of the 15 most populated clusters were characterized by intensity trends with maxima in the 1990s, reflecting intensified human activities, wastewater treatment plant upgrades and regulation in the Rhine riparian countries. Tentative structure annotation was performed using automated in silico fragmentation. Candidate structures retrieved from ChemSpider were scored based on the fit of the in silico fragments to the experimental tandem mass spectra, similarity to openly accessible accurate mass spectra, associated metadata, and presence in a suspect list. Sixty-seven unique structures (72 over both ionization modes) were tentatively identified, 25 of which were confirmed and included contaminants so far unknown to occur in bank filtrate or in natural waters at all, such as tetramethylsulfamide. This study demonstrates that many classes of hydrophilic organics enter riverbank filtration systems, persisting and migrating for decades if biogeochemical conditions are stable.

The robustness of reverse osmosis (RO) against polar organic micropollutants (MPs) was investigated in pilot-scale drinking water treatment. Experiments were carried in hypoxic conditions to treat a raw anaerobic riverbank filtrate spiked with a mixture of thirty model compounds. The chemicals were selected from scientific literature data based on their relevance for the quality of freshwater systems, RO permeate and drinking water. MPs passage and the influence of permeate flux were evaluated with a typical low-pressure RO membrane and quantified by liquid chromatography coupled to high-resolution mass spectrometry. A strong inverse correlation between size and passage of neutral hydrophilic compounds was observed. This correlation was weaker for moderately hydrophobic MPs. Anionic MPs displayed nearly no passage due to electrostatic repulsion with the negatively charged membrane surface, whereas breakthrough of small cationic MPs could be observed. The passage figures observed for the investigated set of MPs ranged from less than 1%–25%. Statistical analysis was performed to evaluate the relationship between physicochemical properties and passage. The effects of permeate flux were more pronounced for small neutral MPs, which displayed a higher passage after a pressure drop.