Studio Odontoiatrico Mangano

Background: In more than three decades of work of the Retrieval Bank of the Laboratory for Undemineralized Hard Tissue Histology of the University of Chieti-Pescara in Italy, many types of biomaterials were received and evaluated. The present retrospective review aimed to evaluate the histological and biological aspects of the evaluated bone substitute biomaterials. Methods: In the present study, the authors prepared a retrospective analysis after the screening of some databases (PubMed, Scopus, and EMBASE) to find papers published from the Retrieval Bank of the Laboratory for Undermineralized Hard Tissue Histology of the University of Chieti-Pescara analyzing only the papers dealing with bone substitute biomaterials and scaffolds, in the form of granules and block grafts, for bone regeneration procedures. Results: Fifty-two articles were found, including in vitro, in vivo, and clinical studies of different biomaterials. These articles were evaluated and organized in tables for a better understanding. Conclusions: Over three decades of studies have made it possible to assess the quality of many bone substitute biomaterials, helping to improve the physicochemical and biological properties of the biomaterials used in daily clinical practice.

One of the most important aspects of bone remodeling is the constant turnover mainly driven by the mechanical loading stimulus. The remodeling process produces changes not only in the bone microarchitecture but also in the density distribution of the mineralized matrix - i.e. in calcium concentrations- and in the osteocyte lacunar network. Synchrotron radiation-based X-ray microtomography (microCT) has proven to be an efficient technique, capable to achieve the analysis of 3D bone architecture and of local mineralization at different hierarchical length scales, including the imaging of the lacuno-canalicular network. In the present study, we used microCT within a conceptual study of jawbone remodeling, demonstratively focusing the investigation in two critical contexts, namely in the peri-dental and the peri-implant tissues. The microCT analysis showed that a relevant inhomogeneity was clearly present in both peri-dental and peri-implant biopsies, not only in terms of microarchitecture and mineralization degree, but also considering the lacunar network, i.e. size and numerical density of the osteocyte lacunae. The correlated histological results obtained on the same samples confirmed these observations, also adding information related to non-mineralized tissues. Despite its demonstrative nature, it was concluded that the proposed method was powerful in studying jawbone remodeling because it revealed a direct correlation of its rate with the lacunar density, as achieved by the analysis of the osteocyte lacunar network, and an inverse correlation with the local bone mineral density, as revealed with the Roschger approach.

In dental districts, successful bone regeneration using biphasic calcium phosphate materials was recently explored. The present study aimed to perform a comparative study between 3D-printed scaffolds produced by laser light stereo-lithography (SLA) and traditionally sintered biphasic calcium phosphate scaffolds by an integrated morphological, morphometric and mechanical analysis. Methods: Biphasic calcium phosphate (30% HA/70% β-TCP) samples, produced by SLA-3D-printing or by traditional sintering methods, were tested. The experimental sequence included: (1) Microtomography (microCT) analyses, to serve as control-references for the 3D morphometric analysis; (2) loading tests in continuous mode, with compression up to fracture, to reconstruct their mechanical characteristics; and (3) microCT of the same samples after the loading tests, for the prediction of the morphometric changes induced by compressive loading of the selected materials. All the biomaterials were also studied by complementary scanning electron microscopy to evaluate fracture regions and surfaces. Results: The characterization of the 3D mineralized microarchitecture showed that the SLA-3D-printed biomaterials offer performances comparable to and in some cases better than the traditionally sintered ones, with higher mean thickness of struts and pores. Interestingly, the SLA-3D-printed samples had a higher ultimate strength than the sintered ones, with a smaller plastic region. Moreover, by SEM observation, it was observed that fractures in the SLA-3D-printed samples were localized in the structure nodes or on the external shells of the rods, while all the traditionally sintered samples revealed a ductile fracture surface. Conclusions: The reduction of the region of plastic deformation in the SLA-3D-printed samples with respect to traditionally sintered biomaterials is expected to positively influence, in vivo, the cell adhesion. Both microCT and SEM imaging revealed that the studied biomaterials exhibit a structure more similar to human jaw than the sintered biomaterials.

Implant dentistry is living a revolution of materials and
\ntechnologies aiming at a higher predictability, quantification,
\nless invasivity, and higher esthetic expectations.
\nA new fresh sequence of researches is renewing the
\nconcepts and predictability of bone gra\ting implant designs,
\ndigital dentistry.
\nPredictable parameter of treatments of peri-implantitis is
\ncreating new perspectives.
\nBone gra\ting philosophy takes a new direction.
\nResearches are mirroring the biological aspects focusing on
\nbiological integration and the necessity of lack of foreign
\nbody reaction.
\nNew materials and classifications of lateral and vertical
\ngra\ting are on the way, aiming at a higher predictability
\nand success rate. Collagen matrices have shown capacity
\nof increasing the peri-implantary so\t tissue quality and
\nquantity.
\nAccuracy and precision are the new parameters in
\nimplant placement. We take advantage of quantified data
\nabout precision and accuracy of digital impressions. Next
\naccuracy and precision in all the new technologies of guided
\nimplant placement are taken “under the loupe”: dynamic
\nnavigation, planning systems, printing technologies, and
\nsurgical guides.
\nImplant Dentistry never sleeps.
\n e special issue “Implant Dentistry: New Materials and
\nTechnologies” introduces with freshness and professionality
\nthe scientific reliability of a new era in implant dentistry

The aim of this retrospective study was to evaluate the aesthetic outcome of single-tooth Morse taper connection implants placed in fresh extraction sockets of the anterior maxilla, by means of the pink aesthetic/white aesthetic score (PES/WES) index. Twenty-six adult patients (18 men, 8 women, aged between 20 and 62 years; average: 48.7 years) who were treated with an immediate, single-tooth Morse taper connection implant (Leone Implant System(R) , Florence, Italy) in the aesthetic area of the anterior maxilla, were enrolled in this retrospective study. An independent calibrated examiner applied the PES/WES index to 26 single-tooth implant-supported restorations, respectively, 3 months and 2 years after implant placement. No implants were lost. All 26 anterior maxillary single-tooth implants fulfilled the established success criteria for dental implants with regard to osseointegration, including the absence of pain, suppuration, clinically detectable implant mobility, peri-implant radiolucency and prosthetic complications at the implant-abutment interface, with an overall implant-crown success of 100.0%. At the 2-year examination, the mean DIB was 0.44 ± 0.14 mm (95% CI: 0.41-0.47); the mean total PES/WES was 14.30 ± 2.78 (range 8-19); the mean PES was 7.30 ± 1.78 (range 4-10) and the mean WES was 7.00 ± 1.35 (range 4-10). The immediate placement of single-tooth Morse taper connection implants in the anterior maxilla seems to represent a successful procedure, from an aesthetic point of view. Further studies are needed to evaluate the aesthetic outcome of single-tooth Morse taper connection implants placed in fresh extraction sockets of the anterior maxilla.