Wind Technologies (United Kingdom)

Titanium niobium oxides (TNOs) are attractive anode materials for high power density Li-ion batteries. However, the details of capacity storage in TNOs are not fully understood today as it depends on the Ti and Nb composition and their changes in the oxidation state. This is further complicated by a wide variation in gravimetric capacities reported in the literature for TNO anodes. Therefore, in this work, we systematically synthesise TiNb2O7, Ti2Nb10O29, Ti2Nb14O39, and TiNb24O62 particles using the same solid state reaction approach and report their electrochemical properties via galvanostatic cycling, cyclic voltammetry, and the galvanostatic intermittent titration technique (GITT). Furthermore, we use operando X-ray absorption spectroscopy (XAS) to investigate the redox reactions taking place in each of these compositions, which provides new insights into their charge storage mechanisms. We found that of the materials tested, TiNb2O7 anodes show the best cycling and rate performance, which could be related to the higher utilization of Nb redox revealed via operando XAS analysis.

This paper presents a method to estimate the BDFM equivalent circuit rotor current from rotor bar current measurements. Rotor currents are measured using a specially designed hardware that incorporates Rogowski coils and Bluetooth wireless transmission. The measurement of rotor currents enables the parameters in the BDFM's full equivalent circuit to be extracted unambiguously. In particular, stator and rotor leakage inductances can be estimated from experimental tests, which was not possible before from terminal measurement. The method is presented for a nested-loop rotor design and experimental measurements are shown for a prototype D180 frame BDFM

Abstract The intestinal mucosa plays a vital role in nutrient absorption, drug metabolism, and pathogen defence. Advances in single-cell technologies have highlighted the specialised roles of various cell types that execute these diverse functions. Aside from intestinal epithelial cells, fibroblasts play an essential role in regulating the extracellular matrix and controlling pro- inflammatory signalling, and antigen-presenting cells (macrophages and dendritic cells) maintain intestinal homeostasis and immune responses. The incorporation of such cellular complexity within the existingin vitromodels of the human intestine is currently challenging. To address this, we developed a human intestinal model that accurately mimics the mucosal cellular environment comprising intestinal epithelial cells, intestinal fibroblasts, and antigen presenting cells. This model includes co-cultures of adult and foetal cells, facilitating studies on barrier function, inflammation, and viral infections. It replicates extracellular matrix deposition, Paneth cell differentiation, immune interactions, and can be used to model host- pathogen interactions. Our advanced co-culture model improves the physiological relevance ofin vitrostudies, enabling the exploration of epithelial-mesenchymal-immune crosstalk and its role in intestinal health and disease.

Airway organoids are polarized 3D epithelial structures that recapitulate the organization and many of the key functions of the in vivo tissue. They present an attractive model that can overcome some of the limitations of traditional 2D and Air–Liquid Interface (ALI) models, yet the limited accessibility of the organoids’ apical side has hindered their applications in studies focusing on host–pathogen interactions. Here, we describe a scalable, fast and efficient way to generate airway organoids with the apical side externally exposed. These apical-out airway organoids are generated in an Extracellular Matrix (ECM)-free environment from 2D-expanded bronchial epithelial cells and differentiated in suspension to develop uniformly-sized organoid cultures with robust ciliogenesis. Differentiated apical-out airway organoids are susceptible to infection with common respiratory viruses and show varying responses upon treatment with antivirals. In addition to the ease of apical accessibility, these apical-out airway organoids offer an alternative in vitro model to study host–pathogen interactions in higher throughput than the traditional air–liquid interface model.

Organoids are stem cell-derived structures that are generated in three-dimensional tissue culture. They are unique since they exhibit a high degree of self-organization and differentiation, and thus recapitulate many of the features of the tissues from which they were derived. Because of this, organoids are now firmly established as an essential tool in medical research, and have the potential to drastically reduce the number of animals required for experimentation.

This paper presents a new multi‐force touch technology that augments standard capacitive touch sensing in flat panel, and potentially flexible, displays. It uses an augmented approach and yields both location and force in a single‐signal, which is then separated and conditioned using unique analog and digital signal processing algorithms. Location‐by‐force is intrinsic to this new UltraTouch technology, thus enabling stylus‐independent, under‐water interactivity. In view of the simplicity in stack‐up architecture, the technology is compatible to roll‐to‐roll touch panel production lines, scalable to large areas, and importantly, low in cost.

We present results from our recent development of a multi-beam Doppler lidar system for accurate 3-dimensional wind measurements. The eye-safe all-fibre system consists of a single seed laser that is amplified in multiple stages and shared between the three emitters. Steps towards wind turbine blade integration will be outlined.

This paper studies the unbalanced magnetic pull (UMP) in the Brushless Doubly-Fed Machine (BDFM). Analytical study is performed to derive the UMP, then, Finite element (FE) analysis, which has been verified experimentally, is used to verify the analytical method. The BDFM with different types of rotor eccentricities including static and dynamic eccentricities, are also modeled in FE method and their resultant UMPs are obtained. The results are compared with the case at which a perfectly constructed rotor is considered. The study has been carried out on a prototype D400 250 kW BDFM.

The brushless doubly fed machine (BDFM) is a robust alternative to the doubly fed induction generator, currently widely used in wind turbines but prone to brush-gear and slip-ring failure. The rotor winding plays an important part in a BDFM, coupling the two stator windings. To date, nested-loop (NL) rotor windings have been exclusively used in practical BDFM. This approach may not be ideal for larger machines, in which form-wound series-loop rotor winding may be preferable to large section bars and end-rings. This study gives a comparative analytical and experimental study of two different brushless doubly fed 160 frame-size rotors, with NL or series-wound windings, mounted in identical rotor core laminations operating in the same stator tested at a limited voltage (200 V line). The rotors gave a performance which accords with theoretical predictions from two independent methods, giving insight into the design issues of the different rotor windings from both an electrical and manufacturing viewpoint.