• Home
  • Search
  • Структура та властивості поверхневих шарів деформованого цирк¬нію, легованого Nb, Мо та В шляхом лазерної обробки поверхні
  • https://doi.org/10.15407/materials2024.08-09.003Copy DOI Icon

Структура та властивості поверхневих шарів деформованого цирк¬нію, легованого Nb, Мо та В шляхом лазерної обробки поверхні

Show More
  • Abstract
  • Literature Map
  • References
  • Similar Papers
Abstract

The phase composition and structure of the near-surface layers of zirconium ribbons subjected to laser treatment in the initial state and after alloying with B, Mo, Nb were studied. The distribution of microhardness values on the surface of the coating and changes in microhardness at different distances from the surface were analyzed. X-ray structural analysis of the surface layers was performed, and their phase composition was determined. The influence of β-stabilizing elements on changes in the phase composition was demonstrated. In the Zr—Mo coating, a phase transformation of Zr with bcc modification takes place. It is observed that small intermetallic particles of the ZrMo2 compound are released, which help to increase the hardness in the coating to the values of μ = 1200—1300. The content of niobium in the zirconium matrix in the Zr—Nb coating, calculated according to X-ray analysis, is 29,4% (at.) which is sufficient to stabilize the BCC lattice. The value of microhardness Hμ = 600—700 on the surface of the coating is typical for hardened zirconium with a bcc lattice. The hardness of the Zr—B coating on the surface reaches values of Hμ = 1600—1400, gradually decreases in the depth of the molten layer to Hμ = 1300 and sharply decreases outside the molten zone to Hμ = 300. Significant surface hardening of the coating is associated with a large amount of the strengthening phase ZrB2. As a result of the experiments, it was established that doping with niobium and molybdenum causes fundamental phase changes in the surface layer of coatings due to the stabilization of the β phase. This is important for protecting the surfaces of nuclear power and medical devices. The addition of B significantly increases the hardness due to the mechanism of dispersed strengthening, which contributes to the improvement of the wear resistance of the coatings. Keywords: laser processing, coating, phase composition, dispersed particles, hardness.

Similar Papers
  • Research Article
  • Citations85

“Self-Defensive” Antifouling Zwitterionic Hydrogel Coatings on Polymeric Substrates

  • Dec 09, 2022
  • ACS Applied Materials & Interfaces
  • Jing Zhang +6
  • PDF
  • Research Article
  • Citations12

Effect of High-Pressure Torsion and Annealing on the Structure, Phase Composition, and Microhardness of the Ti-18Zr-15Nb (at. %) Alloy.

  • Feb 20, 2023
  • Materials
  • Dmitry Gunderov +9
  • Research Article
  • Citations16

Relations between Some Properties of Sintered WC-10%Ni Alloy and its Binder Phase Composition

  • Jan 01, 1966
  • Journal of the Japan Society of Powder and Powder Metallurgy
  • Hisashi Suzuki +3
  • PDF
  • Research Article

МАТЕМАТИЧНЕ МОДЕЛЮВАННЯ ПРОЦЕСІВ НАВАНТАЖЕННЯ ДЕТАЛЕЙ АВТОМОБІЛІВ І ВИБІР ОПТИМАЛЬНИХ МАТЕРІАЛІВ, ПОКРИТТІВ ТА СПОСОБІВ ЇХ ЗМІЦНЕННЯ

  • Jun 06, 2023
  • Математичне моделювання
  • М.В Скороход +4
  • Conference Article

Design of Electromagnetic Coils and Temperature Regulation Circuits for Impeding Microbial Growth on Medical Device Surfaces

  • Apr 10, 2017
  • Ashish Singal
  • Research Article
  • Citations1

Effect of gas nitriding on microhardness and microstructure of laser cladding iron-based alloy coating

  • Apr 07, 2025
  • Journal of Laser Applications
  • Gaolin Yang +5
  • Research Article
  • Citations4

Microstructure and properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting

  • Nov 01, 2018
  • Journal of Physics: Conference Series
  • N S Pushilina +7
  • Research Article
  • Citations17

Effect of overlaps on phase composition and crystalline orientation of laser-melted surfaces of 321 austenitic stainless steel

  • Mar 08, 2004
  • Thin Solid Films
  • X.Y Wang +2
  • Research Article
  • Citations13

Influence of pulsed plasma treatment on phase composition and hardness of Cr3C2-NiCr coatings

  • Mar 25, 2021
  • Eurasian Journal of Physics and Functional Materials
  • D.N Kakimzhanov +5
  • PDF
  • Research Article
  • Citations19

Absorption of Nitrogen during Pulsed Wave L-PBF of 17-4 PH Steel

  • Jan 25, 2021
  • Materials
  • Ben Brown +2
  • Research Article
  • Citations4

Silica Shells/Adhesive Composite Film for Color Doppler Ultrasound Guided Needle Placement.

  • Jun 21, 2017
  • ACS Biomaterials Science & Engineering
  • Jian Yang +8
  • Conference Article

Nanostructure of NiTi surface layers after Ta ion implantation

  • Jan 01, 2016
  • AIP conference proceedings
  • S L Girsova +3
  • Research Article

Structure and phase composition of the intermetallide Ni3Al+0.5 at.% B synthesized under pressure

  • Sep 01, 1996
  • Russian Physics Journal
  • M V Fedorishcheva +2
  • Research Article
  • Citations15

Paraffin/methyl stearate/multi‐walled carbon nanotubes composite phase change materials with wide service temperature and high latent heat

  • Mar 31, 2021
  • International Journal of Energy Research
  • Zhengkai Wei +7
  • Dissertation

Sodicity and soil microstructure

  • Jan 01, 2005
  • The University of Queensland
  • Cameron Wearing
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.