• Home
  • Search
  • ВИЗНАЧЕННЯ ДЕФОРМАЦІЙНИХ ВЛАСТИВОСТЕЙ ЗАКЛАДАЛЬНИХ МАСИВІВ У РІЗНИХ УМОВАХ СТИСНЕННЯ
  • https://doi.org/10.31474/2415-7902-2025-2-15-282-296Copy DOI Icon

ВИЗНАЧЕННЯ ДЕФОРМАЦІЙНИХ ВЛАСТИВОСТЕЙ ЗАКЛАДАЛЬНИХ МАСИВІВ У РІЗНИХ УМОВАХ СТИСНЕННЯ

  • Abstract
  • Literature Map
  • Similar Papers
Abstract

Purpose. To assess the deformation properties of base materials made of crushed rock of heterogeneous granulometric composition under different compression conditions to substantiate measures to prevent roof collapses in the mining areas of coal mines. Methods. Deformation processes were studied on experimental models that simulated the conditions of complete and partial filling of the mined space with crushed rock. Partial filling corresponded to the conditions of uniaxial compression of the crushed rock with the possibility of its lateral expansion. Full filling - to the conditions of compression compression of the base material. Results. Compaction of the embankment massifs under gradual loading under compression conditions leads to an increase in the deformation modulus Ed (MN/m) more than three times, compared to the conditions of uniaxial compression. The embankment massif, when fully compacted, works as a supporting structure with increasing resistance, which acquires the characteristics of a rigid support when reaching the limit compaction (in this experiment, when reaching the value of the relative deformation λ = 0.381, which is 42% less than under uniaxial compression conditions). The stiffness of the model material in the languages of compression compression is on average 40% greater than under uniaxial compression conditions. Under such conditions, the strength of the massif becomes maximum, the increase in displacements reaches minimum values, and the movements of lateral rocks are limited. Scientific novelty. The dependence between the relative change in the volume of crushed rock of heterogeneous granulometric composition per unit of convergence ΔVK (m⁻¹) and the deformation modulus of the backfill massif, which is under compression compression conditions, has been established. The nature of this dependence allows, based on the results of laboratory tests, to estimate the limiting value of the deformation modulus of the backfill massif when reaching the limit compaction. Practical significance. The estimation of the limiting value of the deformation modulus of the backfill material is necessary to determine the strength of the backfill massifs, which determines the efficiency of holding the forged rock massif and affects the stability of the preparatory workings of the extraction areas and increasing the safety of miners. Keywords: backfilling of the mined space, crushed rock, compaction, uniaxial compression, compression compression, deformation processes

Similar Papers
  • PDF
  • Research Article
  • Citations12

Numerical Reconstruction Model and Simulation Study of Concrete Based on Damaged Partition Theory and CT Number.

  • Dec 06, 2019
  • Materials
  • Jianyin Fang +5
  • Research Article
  • Citations11

Adiabatic shear banding of hot‐rolling Ti–6Al–4V alloy subjected to dynamic shearing and uniaxial dynamic compression

  • Jul 17, 2015
  • Rare Metals
  • Yu‐Meng Luo +5
  • Research Article
  • Citations4

Calculation of mesoscopic strain characteristics for the study of the behavior of porous ceramics under uniaxial compression

  • May 01, 2009
  • Physical Mesomechanics
  • S.V Panin +3
  • Research Article
  • Citations3

Research on the Charge Inducing Regularity of Coal Rock at Different Loading Rates in Uniaxial Compression Tests

  • Mar 01, 2013
  • Chinese Journal of Geophysics
  • Pan Yi‐Shan +4
  • Research Article
  • Citations13

Mesoscale studies on the effect of aggregate shape idealisation in concrete

  • Mar 01, 2019
  • Magazine of Concrete Research
  • A Thirumalaiselvi +2
  • Research Article
  • Citations42

The influence of water on the failure characteristics of sandstone under uniaxial compression conditions by acoustic emission and NMR observation

  • May 24, 2023
  • Engineering Geology
  • Shun Ding +3
  • PDF
  • Research Article

Study on the Micro Mechanism of Failure Evolution of Desulfurization Gypsum–Fly Ash Fluidized Lightweight Soil Based on Discrete Element Method

  • Aug 02, 2024
  • Coatings
  • Xiuliang Li +3
  • PDF
  • Research Article
  • Citations5

Crack propagation and stress evolution in fluid-exposed limestones

  • Oct 17, 2024
  • Acta Geotechnica
  • Z Liu +3
  • PDF
  • Research Article
  • Citations9

Dip effect on the orientation of rock failure plane under combined compression–shear loading

  • Feb 22, 2024
  • Scientific Reports
  • Lijun Sun +5
  • Research Article
  • Citations2

Mechanical properties and energy evolution of outburst coal seams under different load regimes

  • Nov 01, 2024
  • Energy Science & Engineering
  • Zhang Tianjun +6
  • Research Article
  • Citations27

Experimental Investigation on Energy Mechanism of Freezing-Thawing Treated Sandstone under Uniaxial Static Compression

  • Mar 04, 2019
  • KSCE Journal of Civil Engineering
  • Hongwei Deng +4
  • Research Article

Disorientation kinetics of the B 80 4 centers in single crystal silicon

  • Jan 01, 2002
  • Journal of Experimental and Theoretical Physics
  • A S Kaminskii
  • Research Article
  • Citations3

Nanoscale Modeling of Shock-Induced Deformation of Diamond

  • Jan 01, 2003
  • MRS Proceedings
  • S V Zybin +3
  • Research Article
  • Citations1

掘削に伴つて変動する岩盤内応力の新しい測定法について

  • Jan 01, 1987
  • Journal of the Mining and Metallurgical Institute of Japan
  • Koji Matsuki
  • Research Article
  • Citations25

Shear Induced Non-Linear Elasticity Imaging: Elastography for Compound Deformations.

  • Jun 02, 2020
  • IEEE Transactions on Medical Imaging
  • Soumya Goswami +4
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.