- Research Article
12
- 10.1016/s0749-6419(98)00012-6
Damage in a viscoplastic material—Part II. Overall behaviour
- Jan 01, 1998
- International Journal of Plasticity
- L Briottet
Damage in a viscoplastic material—Part II. Overall behaviour
A circuit and computations of drawing technology are offered at which a drawing without thinning (convolution) and with thinning (broach) is carried out in a step matrix. Visco-plastic material is used for sheet blanks. A power method of computation with the use of discontinuous fields of traverse speeds is used. There are shown design assessments of a drawing force and material damageability.
Damage in a viscoplastic material—Part II. Overall behaviour
Damage in a viscoplastic material—Part II. Overall behaviour
Damage Precursor Identification via Microstructure-Sensitive Nondestructive Evaluation
Damage in materials is a complex and stochastic process bridging several time and length scales. This dissertation focuses on investigating the damage process in a particular class of precipitate-hardened aluminum alloys which is widely used in automotive and aerospace applications. Most emphasis in the literature has been given either on their ductility for manufacturing purposes or fracture for performance considerations. In this dissertation, emphasis is placed on using nondestructive evaluation (NDE) combined with mechanical testing and characterization methods applied at a scale where damage incubation and initiation is occurring. Specifically, a novel setup built inside a Scanning Electron Microscope (SEM) and retrofitted to be combined with characterization and NDE capabilities was developed with the goal to track the early stages of the damage process in this type of material. The characterization capabilities include Electron Backscatter Diffraction (EBSD) and Energy Dispersive Spectroscopy (EDS) in addition to X-ray micro-computed tomography ([mu]-CT) and nanoindentation, in addition to microscopy achieved by the Secondary Electron (SE) and Back Scatter Electron (BSE) detectors. The mechanical testing inside the SEM was achieved with the use of an appropriate stage that fitted within its chamber and is capable of applying both axial and bending monotonic and cyclic loads. The NDE capabilities, beyond the microscopy and [mu]-CT, include the methods of Acoustic Emission and Digital Image Correlation (DIC). This setup was used to identify damage precursors in this material system and their evolution over time and space. The experimental results were analyzed by a custom signal processing scheme that involves both feature-based analyses as well as a machine learning method to relate recorded microstructural data to damage in this material. Extensions of the presented approach to include information from computational methods as well as its applicability to other material systems are discussed.
Read moreOn the early breakdown of semisolid suspensions
On the early breakdown of semisolid suspensions
PHASE-FIELD MODELING OF CONCRETE: NUMERICAL SIMULATION AND EXPERIMENTAL VERIFICATION
Simulation of concrete structures behavior is very popular in engineering design, as the concrete is the most used the material in the world. The possibilities are related to the development of Finite Element Method (FEM) based software and the possibility to implement advanced constitutive models or computational mechanics methods which can provide satisfying results. The most popular concrete constitutive model available in many FEM software is Concrete Damage Plasticity (CDP) model which takes into account both tension and compression response, as well as damage field which can be considered as the level of stiffness decrease in the material. Another approach is a Phase-Field Damage Model (PFDM) which found application in recent years in modeling response of various materials exposed to extreme loading conditions. In this paper, the Drucker-Prager constitutive model is enhanced to compute a strain energy which produces damage in material under the certain conditions. The damage is considered as the additional degree of freedom in 3D solid element, where the threshold value of a critical total strain energy is declared as the limit quantity. The functionality of the proposed approach is considered by comparison of experimental and simulation results for uniaxial compression test.
Read moreAdvances in glass-based space radiation shielding
Space is a hostile environment for astronauts, where prolonged missions can result in severe short-and long-term health issues. One such factor is exposure to radiation characterised by galactic cosmic rays (GCR), alpha- and beta- particles, gamma rays, and neutrons.(1) Efficient shielding against such radiation is very difficult, where different particles modify properties of materials differently but synergistically, hence shielding strategies need to be optimised for the environment. The ionizing radiation (IR) in space can cause ionization and displacement of atoms depending on the energy dosage and exposure duration leading to material property degradation.(2) The GCR spectrum is made up of particles with a wide range of energies and mass, making it difficult to emulate the whole gamut of radiation environment in a terrestrial laboratory.(3) In addition, accumulation of damage in materials take a very long time in space, requiring accelerated methods to evaluate next generation materials for space application. The current approach is to use high energy accelerators, gamma and x-ray chambers to deliver radiation with specific energy and mass to evaluate material performance. Among various materials used in space technology, our specific interest is in glass and glass-ceramics for shielding applications to reduce the dose effects of IR from GCR.(4) Glassy materials have been used as shuttle tiles, doors, windows, and as coatings.(5) The benefit of glass is its compositional flexibility, where it can be doped with specific elements to provide optimised properties, e.g. radiation, optical transparency. Recent studies have demonstrated that certain glass compositions based on oxides (B2O3, SiO2, P2O5), and metal oxides (Sm2O3, GeO2 and TeO2) exhibit radiation resistance, when doped with either heavy metal oxides, lanthanides, or transitions metals. Two key challenges are designing glasses that are, optimized glass compositions for multiple, often competing properties and characterisation/quantification of radiation induced damage in an amorphous system. The current talk will provide an overview of radiation effects in glasses for space application and outline computational and experimental methods to overcome these challenges.
Read moreConstitutive Modeling of Viscoplastic Damage in Solder Material
This paper presents a constitutive modeling of viscoplastic damage in 63Sn-37Pb solder material taking into account the effects of micro-structural change in grain coarsening. Based on the theory of damage mechanics, a two-scalar damage model is developed by introducing the damage variables and the free energy equivalence principle. An inelastic potential function based on the concept of inelastic damage energy release rate is proposed and used to derive an inelastic damage evolution equation.The validation of the model is carried out for the viscoplastic material by predicting monotonic tensile behavior and tensile creep curves at different temperatures. The softening behavior of the material under monotonic tension loading can be characterized with the model. The results demonstrate adequately the validity of the proposed viscoplastic constitutive modeling for the solder material.KeywordsSolder JointConstitutive ModelingSolder AlloyDamage VariableSoftening BehaviorThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Read moreA model for high temperature creep of single crystal superalloys based on nonlocal damage and viscoplastic material behavior
A model for high temperature creep of single crystal superalloys is developed, which includes constitutive laws for nonlocal damage and viscoplasticity. It is based on a variational formulation, employing potentials for free energy, and dissipation originating from plasticity and damage. Evolution equations for plastic strain and damage variables are derived from the well-established minimum principle for the dissipation potential. The model is capable of describing the different stages of creep in a unified way. Plastic deformation in superalloys incorporates the evolution of dislocation densities of the different phases present. It results in a time dependence of the creep rate in primary and secondary creep. Tertiary creep is taken into account by introducing local and nonlocal damage. Herein, the nonlocal one is included in order to model strain localization as well as to remove mesh dependence of finite element calculations. Numerical results and comparisons with experimental data of the single crystal superalloy LEK94 are shown.
Read moreA Study of Ability of a Rectangular Shell Deep Drawing by Finite Element Program
This study was the use of the finite element method in the deep drawing process of a rectangular shell cup. The aim was to analyse the equivalent strain in the workpiece and to find out what happened to the disc blank sheet before the forming by stamping. The rectangular shell cup was 24x30x20 mm. and made of 2mm.thick SUS 403 and SUS 304 stainless steel. There were 3 types of blank sheets: 1) square sheet 2) 45 degree angled edge cutting sheet 3) circular sheet. It was found out that the drawing up with the use of 3 types of blank sheet made of SUS 304 stainless steel had no risk in the workpiece. For the stamping of the rectangular shell that used a square sheet made of SUS 403 stainless steel, it was found out that there was no risk in the work piece, but with the use of 45 degree angled edge cutting sheet or round sheet, the work piece had a risk to be damaged. Keywords: rectangular shell, Finite element 1. INTRODUCTION Deep drawing is very important to component manufacturing of parts of a product in industries. The problem of the rectangular shell cup deep drawing process was the equal amount of flow in each side, resulting in making mould in an actual production process. Therefore, finite element process plays a role in analyzing the ability of a rectangular shell deep drawing process and it well known that using steel sheet in deep drawing process requires an awareness of the factors that have an effect with finished workpieces to prevent the damage that may happen with workpieces during the deep drawing process There are the factors or variable that have an influence on ability in drawing. During the deep drawing, the punch will be stamped on the blank sheet through the die opening. This process will make the bending and unbending in the die. The metal between the punch will have tensile stress along the line of the punch and the hoop compression stress. The metal on the shell wall will receive axial tension. At the bottom of the shell the metal will have tensile stress on both axial lines. This stress has an effect to the force in drawing and damage that will be
Read moreThe Quantification of Errors in the Measurement of Nonlinear Ultrasonics
<div class="section abstract"><div class="htmlview paragraph">Nonlinear ultrasonics is a powerful method for detecting microscopic damage and stress in materials. The method is based on introducing a perturbation signal at high frequency, and monitoring higher order harmonics for microscopic damage or quantifying the frequency shift for measuring stress. As the influence of microscopic damage and stress to the ultrasonic signal is weak, a highly precise measurement is needed. In this paper, errors in the measurement equipment, measurement methodology, and couplant type are experimentally quantified. Random errors and unknown systematic errors inherent to the method and its tools are defined. The measurement uncertainty in nonlinear ultrasonics is quantified. Based on the limitation of the measurement accuracy, minimum detectable stress level is defined.</div></div>
Read moreEvaluation of Material Design Limits for TBM Applications
The aim of the work presented is, firstly, an evaluation of existing design rules considered for austenitic steels exhibiting hardening cycle by cycle contrary to the reduced activation ferritic-martensitic steels (RAFM), which soften under cyclic loading. Secondly, it is a definition of the range of operation temperatures and loads for the current design of the test blanket module (TBM). Results of cycling tests of the EUROFER 97 performed by J. Aktaa & R. Schmitt have been thereby used to adjust material parameters needed for an ABAQUS-own combined non-linear isotropic-kinematic hardening model. Furthermore, the visco-plastic material model considering material damage implemented recently as an ABAQUS user material (UMAT) has been applied for simulations and the results have been compared with those obtained using the material model mentioned above
Read moreВариационная оценка режима осадки при сварке давлением
There are offered ratios for the computation of deformation and power modes of yielding at billet pressure welding. A power method is used for the computation of pressure with reference to a flat discontinuous field of movement speeds. Pressure minimization is carried out in a variation way. The assessment of billet material damageability is shown.
Read moreA review of the efforts to develop muscle and musculoskeletal models for biomechanics in the last 50 years
A review of the efforts to develop muscle and musculoskeletal models for biomechanics in the last 50 years
Computational Methods for the Discovery of Metabolic Markers of Complex Traits
Metabolomics uses quantitative analyses of metabolites from tissues or bodily fluids to acquire a functional readout of the physiological state. Complex diseases arise from the influence of multiple factors, such as genetics, environment and lifestyle. Since genes, RNAs and proteins converge onto the terminal downstream metabolome, metabolomics datasets offer a rich source of information in a complex and convoluted presentation. Thus, powerful computational methods capable of deciphering the effects of many upstream influences have become increasingly necessary. In this review, the workflow of metabolic marker discovery is outlined from metabolite extraction to model interpretation and validation. Additionally, current metabolomics research in various complex disease areas is examined to identify gaps and trends in the use of several statistical and computational algorithms. Then, we highlight and discuss three advanced machine-learning algorithms, specifically ensemble learning, artificial neural networks, and genetic programming, that are currently less visible, but are budding with high potential for utility in metabolomics research. With an upward trend in the use of highly-accurate, multivariate models in the metabolomics literature, diagnostic biomarker panels of complex diseases are more recently achieving accuracies approaching or exceeding traditional diagnostic procedures. This review aims to provide an overview of computational methods in metabolomics and promote the use of up-to-date machine-learning and computational methods by metabolomics researchers.
Read moreAnalysis of iterative methods in PageRank computation
PageRank is one of the basic metric used in web search technology to rank the web pages. It uses power method to compute principal eigenvector of the web matrix of several billion nodes. PageRank method incorporates a parameter α called damping factor that plays a major role in PageRank computation. In this study, we have observed experimentally the efficiency of various iterative methods on hyperlink graph for different value of α. We conclude from experiment that Power method is effective and more competitive for the well condition problem i.e. small value of α. However, for α → 1 Power method becomes more complex, and other methods such as Aitken-Power, SOR, and Gauss-Seidel are more efficient than it in respect of CPU time as well as the number of iteration needed for convergence.
Read moreQuantitative visualization methods for continuous evolution of three-dimensional discontinuous structures and stress field in subsurface rock mass induced by excavation and construction - An overview
Quantitative visualization methods for continuous evolution of three-dimensional discontinuous structures and stress field in subsurface rock mass induced by excavation and construction - An overview
Read more