Суперконденсаторні енергонакопичувачі для освітлювальних систем з комбінованим електроживленням

The article discusses the possibility of using renewable energy sources for power supply of the Murghab settlement of the Gorno-Badakhshan Autonomous Region (GBAO). The climatic conditions of the area are assessed, and the possibility of installing alternative energy sources in this village is being investigated. It is proposed to use solar power plants as alternative sources. The necessary equipment is selected and the number of solar installations and their capacity is calculated.

"The article considers two options for autonomous power supply using both traditional and non-traditional fuels. The efficiency of using renewable energy sources is described depending on the climate, geographical location and method of energy production. The relevance of this topic is caused by increasingly high environmental requirements for production. Moreover, decentralization with the use of unconventional sources allows the energy system to be more flexible in an autonomous mode, taking into account the time of day, the intensity of solar, wind and hydropower. The use of renewable energy sources is also possible in combination with solid, liquid and gaseous fuels. Combined systems are very convenient for power supply of small objects. These can be settlements remote from centralized power supply, autonomous industrial facilities, peasant farms, livestock farms. One of the energy supply options is more suitable for the northern region of the country with a long cold period and the presence of large coal reserves, there is an opportunity for the consumer to receive gas, as well as heat and electric energy when using coal as a feedstock, a kind of local gas network. The second method will ensure the disposal of animal waste and organic waste. Keywords: alternative energy sources, biogas, gaseous fuel, coal processing, autonomous power supply."

In the past century, fossil fuels have dominated energy supply in Indonesia. However, concerns over emissions are likely to change the future energy supply. As people become more conscious of environmental issues, alternatives for energy are sought to reduce the environmental impacts. These include renewable energy (RE) sources such as solar photovoltaic (PV) systems. However, most RE sources like solar PV are not available continuously since they depend on weather conditions, in addition to geographical location. Bali has a stable and long sunny day with 12 hours of daylight throughout the year and an average insolation of 5.3 kWh/m2 per day. This study looks at the potential for on-grid solar PV to decarbonize energy in Bali. A site selection methodology using GIS is applied to measure solar PV potential. Firstly, the study investigates the boundaries related to environmental acceptability and economic objectives for land use in Bali. Secondly, the potential of solar energy is estimated by defining the suitable areas, given the technical assumptions of solar PV. Finally, the study extends the analysis to calculate the reduction in emissions when the calculated potential is installed. Some technical factors, such as tilting solar, and intermittency throughout the day, are outside the scope of this study. Based on this model, Bali has an annual electricity potential for 32-53 TWh from solar PV using amorphous thin-film silicon as the cheapest option. This potential amount to three times the electricity supply for the island in 2024 which is estimated at 10 TWh. Bali has an excessive potential to support its own electricity demand with renewables, however, some limitations exist with some trade-offs to realize the idea. These results aim to build a developmental vision of solar PV systems in Bali based on available land and the region’s irradiation.

Nowadays the power supply of electronic circuits which are beyond a reach of main power supply is relatively complicated problem. In our case, if we consider that wireless sensor network of IEEE 802.15.4 standard is not limited to the interior we rely on an alternative power source for the power supply of intelligent wireless modules. Leaving aside the purely alternative power source supplying energy directly into electricity distribution network, we are thrown upon a combination of battery - alternative source. The paper contains a solution of a functional system applying a solar panels and Li-ION batteries for power supply of intelligent wireless modules of sensor network.

Prioritization of renewable energy sources for Turkey by using a hybrid MCDM methodology

This paper presents a method for refining the forecast schedule of renewable energy sources (RES) generation by its intraday adjustment and investigates the measures for reserving RES with unstable generation in electric power systems (EPSs). Owing to the dependence of electricity generation by solar and wind power plants (PV and WPPs, respectively) on natural conditions, problems arise with their contribution to the process of balancing the power system. Therefore, the EPS is obliged to keep a power reserve to compensate for deviations in RES from the planned generation amount. A system-wide reserve (mainly the shunting capacity of thermal and hydroelectric power plants) is used first, followed by other means of power reserve: electrochemical, hydrogen, or biogas plants. To analyze the technical and economic efficiency of certain backup means, mathematical models based on the theory of similarity and the criterion method were developed. This method is preferred because it provides the ability to compare different methods of backing up RES generation with each other, assess their proportionality, and determine the sensitivity of costs to the capacity of backup methods with minimal available initial information. Criterion models have been formed that allow us to build dependencies of the costs of backup means for unstable RES generation on the capacity of the backup means. It is shown that, according to the results of the analysis of various methods and means of RES backup, hydrogen technologies are relatively the most effective. The results of the analysis in relative units can be clarified if the current and near-term price indicators are known.

Energy security and independence is one of the key points in sustainable development. In modern conditions of rapid growth and development of technologies, more and more attention is paid to finding practical solutions for environmentally friendly and inexpensive energy production. For a long time, scientists from various fields of scientific activity around the world have been engaged in the development and use of alternative energy sources. The share of renewable energy sources in the generation of electricity around the world is growing steadily, which indicates an increase in the use of energy obtained from alternative sources, such as, for example, wind and sun. These trends testify to the desire of consumers to abandon the use of fossil energy sources and nuclear power plants as much as possible in order to ensure further sister development. Under the current conditions of the COVID-19 pandemic, the demand for electricity worldwide has decreased, however, as the study shows, this pandemic has not affected the development of renewable energy. The article analyzes modern trends in the development of renewable energy, taking into account the experience of the EU countries and leading countries of the world in this area. As a result, it was concluded that in modern conditions, to achieve sustainable development, transformation processes are needed in such an important area as energy. Various processes in the global economy, which contributed to the intensive development of alternative energy sources, served as a powerful impetus for such changes. Many countries have made significant progress in the development of renewable energy.

The article deals with the development of a method and algorithm for calculation of individual compo-nents of electricity flows in the branches of an electric power grid circuit caused by generation and con-sumption in its nodes. In particular, it is about estimating the share of renewable energy sources (RES) in the electricity consumption of a given consumer. The method is based on methods and algorithms for the calculation of steady-state modes of power grids, integrating a mathematical model for determining the components of current flows in the branches of the power system circuit. The model employs distribution coefficients of currents in the circuit branches from RES nodes and node voltages to form a matrix of cur-rent distribution coefficients for RES across the power grid branches. Since RES in electric power systems (EPS) use general power grids to transmit the electricity they generate, accurate determination of their power share within overall flows enables the impact of RES on the EPS mode parameters to be considered. The peculiarity of the algorithm for estimating the share of RES in the electricity consumption of a given consumer is its consideration of physical processes in the power system. The input data for the calculation are the power system parameters, the node loads (specified by capacity or schedules), as well as arrays of RES generation and centralized power supply nodes and consumers with a controlled value of the Guar-anteed Origin of electricity from RES. The voltages during the formation of the matrix of power distribu-tion coefficients at nodes along the branches of the power grid are determined by the calculation results of the power grid steady-state modes or by experimental measurement data. The method's efficacy and the accuracy of estimating the RES share in the power consumption of a given consumer are verified and demonstrated through a practical example. Determination of the share of the consumer's electricity con-sumption, which origin from renewable sources can be guaranteed, creates an enabling environment that would foster producers and consumers to increase the use of renewable energy sources and promotes the development of the green energy market. Ref. 18. Fig.3.

Energy and environmental conservation problems are increasing every day. The use of electricity began to experience shortages by about 1.6 billion people. The use of fuel oil (BBM) in road transportation requires a larger number along with the number of means of transportation. On the other hand, there is an inefficient use of energy for some equipment used by humans. Gasoline and electric vehicles generally use inefficient internal combustion engines. About 25% of the combustion results are used for vehicle operations, and 40% is lost to waste heat that is wasted. Waste heat is also wasted on household appliances. Global warming and environmental pollution due to the use of inefficient energy are also increasing. Research by experts on thermoelectrics shows good results in overcoming inefficient use of energy and can provide solutions to energy problems and environmental conservation. Its use is flexible, because it does not require complicated mechanical structures, and is also environmentally friendly. This paper provides a review that reviews the use of thermoelectric in various equipment that produces waste heat energy that has not been utilized optimally.

The program of measures to introduce modern resource-saving technologies for the most effective management of renewable resources will provide the necessary amount of energy to both the population and industrial enterprises. The energy power supply system includes energy power plants using various renewable energy sources (hydraulic, wind, solar) that create more favorable conditions for its stability modes. Unification of power plant using various renewable energy sources (hydraulic, wind, solar) in power supply system has created more favorable conditions for use of power resources. These power plants have their own features of operation modes and definite work place in the production schedule of power supply system. During power supply operation daily production schedules define an operating mode of the system as a whole, including all its elements, from generating sources to high-voltage transmission lines and distributive networks system. The results of given researches are allowed to create the methods of increasing stability, reliability and efficiency supply systems with using renewable energy sources.

Inappropriate choice of locations and sizes of Renewable Energy Sources (RESs) in electric power systems can have an adverse impact on voltages profile, transmission losses and system reliability. This paper proposes a technique for finding the optimal locations and sizes of (RESs) in electric power system using oscillatory particle swarm optimization (OPSO). The technique is applied to the IEEE 9-bus as a test system with a 30% increase in system loading considering various penetration scenarios that assess distributed and concentrated RESs. The technique finds the optimal allocation via minimizing transmission losses, bus voltage deviation or line loading as a single-or-multi-objective optimization problem. Impact of RESs penetration on system transient performance is also obtained using detailed non-linear models of both conventional synchronous machines and RESs. The results are presented illustrating the system performance when exposed to a three-phase short circuit fault for 6 cycles. The results are of prime importance to power system engineers forming a useful guide in system planning and also in system operation.

The concept of increasing the energy efficiency of buildings by placing solar panels on their facades is considered. This solution is evaluated from the point of view of modern urban design, and the possibilities of increasing the energy efficiency of lighting systems of modern buildings with the use of solar panels for their power supply are determined. The implementation of a combination of power from renewable energy sources and from the stationary grid in the absence of energy storage systems (batteries) allows to create systems capable of using almost all the electricity generated by an alternative energy source. In this case, energy losses to energy transportation will be minimal. The absence of such battery systems in the designs allows to install only the design-calculated number of solar panels without the need to make a significant backup of generating capacity for its accumulation or operation in adverse weather conditions. An additional advantage of abandoning energy storage - batteries, is a significant reduction in the use of environmentally hazardous substances such as lead, lithium and acidic or alkaline electrolytes, the production of which has a negative impact on the environment, and their disposal requires additional costs. In the work, it is proposed to use cassette facade systems with built-in solar panels, which allow architects to create a modern appearance of buildings and structures. It is shown that in the absence of solar tracking systems, the reduction in generation is 23% for the case of horizontal expansion of solar panels compared to the case of the optimal angle (for Kyiv 40o) and 40% for the case of vertical installation of solar panels. The analysis indicates the possibility of creating a modern energy-efficient design of building facades, both in the design of modern buildings and in the restoration of facades of existing buildings.

The efficient use of existing energy sources along with the development and widespread use of alternative energy sources, especially renewable energy sources becoming important issues. At this point, the energy content of municipal solid wastes (MSW) can be considered a renewable energy source. MSWs contain a large fraction of renewable material and are continuously produced as a result of human activity. Therefore, international authorized institutions such as the U.S. Department of Energy (US DOE), and the U.S. Environmental Protection Agency (US EPA) assess MSWs as renewable and sustainable energy sources. Incineration is one of the options for energy recovery from MSW as a waste-to-energy (WTE) approach. The R1 energy efficiency is a criterion introduced by the European Union Waste Directive (Directive 2008/98/EC) to differentiate waste operation by incineration as either disposal or energy recovery. The paper focused on the evaluation of the MSW incineration potential of İzmir province in consideration of R1 energy efficiency criteria. According to the R1, the MSW energy recovery (both heat and electricity) potentials were investigated considering the amount, composition, and calorific value of MSW generated in İzmir province. The population growth, MSW generation, and calorific value alternation up to 2026 were estimated for İzmir. Based on MSW future projections of İzmir province, overall energy recovery potential was assessed. It is forecasted that the average net calorific value (NCV) of MSW generated in İzmir will exceed 6 MJ/kg. This NCV will be suitable for energy recovery from the İzmir MSW. Assuming R1=0.65, it is predicted that a minimum of 2231 GWh/year of heat energy or 932 GWh/year of electricity can be produced annually in the next years 2022.

Pre-school facilities are considered to be specific buildings in the matter of construction and renovation. Space-planning features in design for pre-school facilities create special conditions for solar power use to ensure heat and power supply. The article deals with estimation of incoming solar power in reference to the surfaces oriented in different cardinal directions under the weather conditions of the city of Saint-Petersburg (Russia) and the city of Nish (Serbia). A model of how to ensure power supply for a kindergarten of the city of Nish is presented on the basis of the calculations analysis. The cases with regard to completed projects designed to use renewable energy sources in order to supply pre-school facilities with energy in other weather conditions are given herein.

The share of renewable energy sources (RES) in the global energy system is systematically increasing, making them the most important element of the energy transformation. Their use enables rational management of limited resources, reduction of environmental pollution, and has a significant inhibitory effect on energy poverty by improving energy efficiency. The aim of this article is to assess the impact of the use of renewable energy on the level of energy poverty in the European Union countries in 2010, 2015, and 2022. A taxonomic measure of development based on the Weber median was used to examine the relationship between the results achieved by individual EU member states in terms of the impact of the use of renewable energy on the level of energy poverty. The research results clearly indicate the existence of disproportions between the countries of the “old” EU and the countries that joined it in 2004 and later. These disproportions concern both the use of energy obtained from renewable sources and energy poverty. In the countries of the “old” Union, a positive moderate relationship was identified between the use of renewable energy and energy poverty, which means that a higher share of the use of energy from renewable sources in these countries reduces energy poverty. In the countries of the “new” Union, however, this relationship was very weak (2010) or non-existent. Since the renewable energy sector is subject to government policy and regulations, the results presented in this paper should be of interest to decision-makers. A stable, long-term policy should provide an appropriate investment climate that provides support for renewable energy projects and reduces the level of energy poverty.