160Gbps all-optical packet switch demonstrator

We develop an integrated optical packet and circuit switching node in which signaling via optical packet switching is implemented. We demonstrate 80 (8λ × 10) Gbit/s optical packet switching with <;1E-4 packet-loss-rate, 8-lightpaths establishment, and dynamic wavelength-resources control.

Modeling and performance analysis of a data center network (DCN) combining optical packet switching (OPS) and agile optical circuit switching (OCS) in a unified platform are presented. Hybrid optoelectronic packet routers which combine optical switching fabric and electronic buffers are used, supporting 100 Gbit/s (25 Gbit/s × 4 wavelengths) optical packets. OCS transmission is implemented by a novel “express path,” (ExP) an instant wavelength path on demand, which enables certain flows following the ExP with no packet contention, whereas ordinary OPS packets are switched with a deflection routing algorithm and buffering for contention resolution. This architecture can support OCS for large and reliability-sensitive data transferring and OPS for latency-sensitive applications. The performance of the network is investigated via numerical simulations of top-of-rack switch (ToR)-to-ToR traffic in an N-dimensional (up to 4096 node) torus topology. We have made the following observations: 1) torus topology results in high throughput and can be scaled out by increasing the dimension; 2) contention resolution between OPS and agile OCS is needed and our proposed strategies enhance the overall performance; and 3) in a lightly to moderately loaded case of OPS traffic, more than 100 ExPs can be supported simultaneously with acceptable affect on OPS.

We present a 1 × 2 all-optical packet switch. All the processing of the header information is carried out in the optical domain. The optical headers are recognized by employing the two-pulse correlation principle in a semiconductor laser amplifier in loop optical mirror (SLALOM) configuration. The processed header information is stored in an optical flip-flop memory that is based on a symmetric configuration of two coupled lasers. The optical flip-flop memory drives a wavelength routing switch that is based on cross-gain modulation in a semiconductor optical amplifier. We also present an alternative optical packet routing concept that can be used for all-optical buffering of data packets. In this case, an optical threshold function that is based on a asymmetric configuration of two coupled lasers is used to drive a wavelength routing switch. Experimental results are presented for both the 1 × 2 optical packet switch and the optical buffer switch.

We have already proposed a Gigabit Ethernet-Optical Switched Access Network (GE-OSAN) architecture that realizes longer transmission distances and achieves higher security than the conventional Passive Optical Network (PON). To confirm the technical feasibility of the architecture, we introduce here a GE-OSAN prototype system for down-stream transmission. We present the Optical Switching Module (OSM), which uses (Pb,La)(Zr,Ti)O3 (PLZT) optical packet switches, and show that it realizes switching within 10ns of the designed position in the Inter-Frame Gap (IFG). We also introduce an Optical Network Unit (ONU) with optical burst receiver that uses off-the-shelf commercial devices to reduce its cost; two types of an optical to electrical signal (O/E) converter are implemented for performance comparison. After testing both of them, we select the one that satisfies our acquisition time requirement of 64ns.

In this paper, an all-optical network composed of the ROADMs (reconfigurable optical add-drop multiplexer), L2/L3 optical packet switches, and the fiber optical cross-connection for fiber scheduling and measurement based on LCoS (liquid crystal on silicon) technologies is proposed. The L2/L3 optical packet switches are designed with optical output buffers. Only the header of optical packets is converted to electronic signals to control the wavelength of input ports and the packet payloads can be transparently destined to their output ports. An optical output buffer is designed to queue the packets when more than one incoming packet should reach to the same destination output port. For preserving service-packet sequencing and fairness of routing sequence, a priority scheme and a round-robin algorithm are adopted at the optical output buffer. The wavelength of input ports is designed for routing incoming packets using LCoS technologies. Finally, the proposed OFS (optical flow switch) with input buffers can quickly transfer the big data to the output ports and the main purpose of the OFS is to reduce the number of wavelength reflections. The all-optical content delivery network is comprised of the OFSs for a large amount of audio and video data transmissions in the future.

A 160 Gbit/s/port optical packet switch prototype with narrow-band optical code-label processing, optical switching, optical buffering, electrical scheduling, optical MUX/DEMUX, and variable-length packet BER and loss real-time measuring is proposed and experimentally demonstrated. (4 pages)

The wide deployment of wavelength-division multiplexing technology and new transmission techniques have resulted in significant increases in the transmission capacity in optical fibers, both in the number of wavelengths and the bandwidth of each wavelength channel. Meanwhile, the fast growth of the Internet demands more data switching capacity in the network in order to deliver high bandwidth to end users. Although the capacity of electronic routers has been increasing consistently in the past, optical switching appears to be a more cost-effective way to switch individual wavelengths. As the bit rate per wavelength channel continues to grow, optical subwavelength switching emerges as a new paradigm capable of dynamically delivering the vast bandwidth WDM offers. This article discusses one of such techniques, namely optical packet switching, and its performance perceived by end users in optical mesh networks. Specifically, our investigation reveals the benefit of using electrical ingress buffering and traffic aggregation to reduce packet-loss rate of optical packet-switched networks. Through simulation experiments, we present an evaluation of the network's TCP-level performance based on the proposed architecture.

Due to lack of optical RAM buffers in fast optical switches (FOS), statistical multiplexing technologies using FOS like Optical Burst Switching (OBS) or Optical Packet Switching (OPS) are expected to have higher data losses than conventional electronic networks. Consequently, applications transferring data by means of TCP can suffer from a lower throughput. In this paper, we show that this low-throughput problem is mainly an artifact caused by the conventional TCP congestion control algorithms, and can be remedied by using a simple yet effective stop-and-wait congestion control algorithm instead, as long as the propagation delay between TCP source and TCP destination is small compared to the transmission time of an optical packet. We show that such a condition holds for a wide range of scenarios, including fat-tree-based data center networks. We also show that the throughput achieved in a FOS network using stop-and- wait can be the same as, or higher than that in an equivalent, conventional electronic network. I. INTRODUCTION

Optical packet switch with multicast capability enables a broad range of applications in next generation optical networks. In this paper, we propose a cost-effective scheme to enhance the traffic performance of our earlier reported optical wavelength-routed multicast packet switch by modifying rather than adding multicast modules in the switch. A packet scheduling technique is introduced to substantially reduce the output contention for the switch. The effectiveness of our proposed scheme in conjunction with the scheduling technique is analyzed and validated by evaluation of packet loss performance of the modified multicast packet switch through simulations. The simulation results show that the multicast packet loss probability of the modified multicast switch can be significantly reduced without increasing the number of multicast modules by our proposed scheme. This means that to achieve an acceptable level of the multicast packet loss probability, the modified multicast switch requires fewer multicast modules in comparison with our earlier reported switch.

The huge traffic growth which is currently experienced (traffic nearly doubles every year) and foreseen to continue for several years calls for high capacity networks capable of efficiently handling various types of traffic (voice, video, data). WDM (Wavelength Division Multiplexing) optical networks exploiting also fast optical packet switching are expected to provide the required capacity and flexibility for the next generation of high-speed networks. In this context, the European ACTS KEOPS project (KEys to Optical Packet Switching) has concentrated on the definition, development and assessment of optical packet switching and routing networks capable of providing transparency to the payload bit rate. Optical packets of fixed duration have been considered where the payload bit rate, which is user-dependent, can vary from a few hundred Mb/s to 10 Gb/s whereas the header is at a fixed low bit rate (622 Mb/s) to facilitate processing at the network/node interfaces. The challenge addressed by the KEOPS project was therefore to combine the advantages of the relatively coarse-grained WDM techniques with emerging all-optical switching capabilities to yield a high-throughput optical platform directly underpinning next generation data networks (ATM, IP). The project which involved nine partners (Alcatel Alsthom Recherche (F), France Telecom-CNET (F), CSELT (I), Technical University of Denmark (DK), Alcatel CIT (F), Alcatel SEL (D), University of Bologna (I), ETH-Zurich (CH) and University of Strathclyde (UK)) has addressed both network and system studies as well as demonstration experiments based on advanced optoelectronic components developed in the project in order to validate the proposed concept.

Among all proposed structures for optical networks, the optical packet switching (OPS) scheme, due to its practical implementation of IPs in an optical configuration and the consequent advantages, is a prizeworthy candidate for being employed in metropolitan area network and local area network communication levels. One of the few problems frequently met using the OPS structure in the fiber-optics realm is the lack of optical buffers, thus deteriorating the system's flexibility and quality of service. For example, optical label switching networks that have been developed recently based on the generalized multiprotocol label switching protocol, profoundly suffer from this setback which is considered as a great hurdle in their evolution. In this paper, we first introduce the input and output buffer switching models while deducing their blocking probability formulations. Then, by utilizing codes in the OPS structure, we closely examine the potential of code and/or wavelength switching in packet switching networks and also determine their blocking probability. Due to close similarities between different scenarios, we present the prospect of virtual optical buffers using codes, which have close performance to input and output buffers in sight of block probability. The most significant distinction in using virtual buffers is the fact that due to their substantial nature, they happen to exhibit some error probability. However, on account of the advantageous features of codes, the simulated and formulated error probability for both coherent and noncoherent optical code division multiple access (OCDMA), such as Spectrally phase encoded OCDMA and optical orthogonal codes, using virtual buffers, tends to be negligible. Two main code and wavelength switching schemes are also brought to attention in this work, the intelligent and random methods. These scenarios demonstrate an even greater behavioral performance to that of the mere code switching scenario, leading into a more reliable adaptation of virtual buffers. In addition, simulations results happen to provide clear verifications to our analytical approach.

Optical Burst Switching and Packet Switching require the adoption of suitable contention resolution mechanisms at the optical nodes due to multiple packets/bursts attempting to access the shared output channel at the same time. Contentions can be solved by exploiting the space, wavelength and time domain. The many alternatives possible call for suitable scheduling policy aiming at an optimal system performance. This paper provides an assessment of the role of key parameters for an optical packet/burst contention resolution scheme and the resulting node cost estimation in terms of CAPEX, footprint and power consumption. Feasibility tradeoffs due to limited optical buffering and wavelength conversion capability are also taken into account.

At a switching node in an optical packet switching (OPS) network, packet contention occurs whenever two or more packets try to reach the same output port of the node at the same wavelength, consequently it degrades network performance. Previous works on optical packet switching flourishingly adopted optical buffering with optical fibre delay line (FDL), wavelength conversion, or deflection routing to resolve packet contention. In this paper, we focus on the optical fibre delay line approach, especially the selection of proper length of FDL under asynchronous variable length packet traffic. As the length of fibre coils equipped in a FDL optical buffering system is impossible to be reconfigured frequently, a proper length of FDL should be determined during manufacture. The motivation is to observe the impact factors on FDL optical system performance in a WDM network scenario, and provide the empirical data as supports to select the proper length of FDL in an OPS node system.

We demonstrate end-to-end 25Gb/s true optical packet switching featuring burst-mode reception with $\text{Hipo}\lambda\text{aos}$ Optical Packet Switch architecture. Error-free performance at 10−9 was obtained for all validated port-combinations.

An optical packet and circuit integrated network (OPCInet) will allow diverse services, enhanced functional flexibility, and efficient energy consumption, as optical packet switching (OPS) and optical circuit switching (OCS) links are provided on the same infrastructure. In this paper, we design and develop a control system consisting of header processing for optical packets, signaling and routing for optical path setup, and wavelength resource control and link switching between OPS and OCS for the efficient use of resources. Our onboard optical packet header processor is capable of 16-bit longest prefix matching by embedding a 0.6W (5% of TCAM technology on the same condition), 200 million search-per-second (equivalent to 100 Gbps) forwarding engine LSI, and a statistical memory LSI for retaining the statistical information of processed headers. Reactive control automatically selects a packet or circuit link according to the statistical traffic information from the header processor and works with signaling for optical paths. We present an experimental demonstration of a new control system using a previously developed OPCInet testbed.