3-D Passive-Vision-Aided Pedestrian Dead Reckoning for Indoor Positioning

Indoor localization has become a popular topic in recent years. While self-contained pedestrian dead reckoning (PDR) systems can be conveniently implemented on a smartphone with built-in inertial sensors for indoor localization, the error of the estimated position for a PDR system can accumulate quickly and results in an unacceptable position accuracy. To address this issue, we propose the collaborative pedestrian dead reckoning (CPDR) system. The main idea of the CPDR system is when users are near to each other, we can leverage the proximity information to improve their estimated positions by means of the opportunistic Kalman filter. In addition, the backward correction scheme is used to improve the accuracy of user's trajectory. To evaluate the CPDR system, a prototype is implemented on Apple's iPhone 5. The experiment results show that the CPDR system achieves a better position accuracy than the raw PDR system.

Due to the high demand of location-based services in buildings, various indoor positioning methods have been proposed. Among them, the Pedestrian Dead Reckoning (PDR) systems have received much attention because of the widespread deployment of smartphones and no requirement of infrastructure. In this paper, we propose a PDR system to track a pedestrian holding a smartphone while he/she walks in a building. To eliminate the inevitable accumulated error over time, we suggest a method of using location related information from environments. We named it ‘landmark’, which is defined as a specific area (or point) where the pedestrian passes by in a building such as a stair, a door, a corner or a crossroad. If the system detects a landmark during the walking period, then it will correct the position of the user with the pre-defined position information of the landmark. In this work, we propose one kind of landmark called the door landmark. We have developed a method to detect the landmarks only using the sensors embedded in smartphones. The door landmark can be detected by combining the features from the magnetic sensor and user’s walking behavior. Via a set of experiments, we have evaluated the performances of the landmark detection and the position tracking of the system.

The zero-velocity update (ZUPT)-aided extended Kalman filter (EKF) is commonly used in the traditional inertial navigation system (INS)-based foot-mounted pedestrian dead reckoning (PDR) system, which can effectively suppress the error growth of the inertial-based pedestrian navigation systems. However, in the realistic test, the system still often suffers from drift, which is commonly caused by two reasons: failed detection of the stationary phase in the dynamic pedestrian gait and heading drift, which is a poorly observable variable of the ZUPT method. In this paper, firstly, in order to improve the initial heading alignment accuracy, a novel method to calibrate the PDR system’s initial absolute heading is proposed which is based on the geometric method. By using a calibration line rather than only using the heading of the starting point, the method can calibrate the initial heading of the PDR system more accurately. Secondly, for the problem of failed detection of the stationary phase in the dynamic pedestrian gait, a novel stationary phase detection method is proposed, which is based on foot motion periodicity rather than the threshold comparison principle in the traditional method. In an experiment, we found that the zero-speed state points always occur around the minimum value of the stationary detector in each gait cycle. By taking the minimum value in each gait cycle as the zero-speed state point, it can effectively reduce the failed detection of the zero-speed interval. At last, in order to reduce the heading drifts during walking over time, a new motion constraint method is exploited based on the range constraint principle. During pedestrian walking, the distance between the foot position estimates of the current moment and the previous stationary period is within the maximum stride length. Once the distance is greater than the maximum stride length, the constraint method is used to confine the current estimated foot position to the sphere of the maximum stride length relative to the previous stationary foot position. Finally, the effectiveness of all proposed methods is verified by the experiments.

A pedestrian dead-reckoning (PDR) system based on micro-inertial technology usually uses a sensor integrated with a three-axis gyroscope, a three-axis accelerometer, and a three-axis magnetometer and is attached to the person's body (usually on the foot) to acquire the trajectory of the pedestrian. Although a variety of PDR system solutions have been proposed, the PDR solution for marking time and walking hybrid motions has not been formally proposed and solved. Therefore, in this paper, we propose the PDR system using a step-and-heading system scheme for marking time and walking hybrid motion. The main contributions include: 1) an adaptive gait partitioning method for walking and marking time hybrid motions is proposed; 2) a motion classification algorithm that uses a multi-layer perceptron to classify whether each step is walking or marking time is proposed; and 3) a new step length estimator based on several currently proposed models is proposed. Finally, an extended Kalman filtering algorithm combining heuristic heading reduction, flat-ground hypothesis, and cardinal heading aided inertial navigation techniques is used for heading estimation. We evaluate the effectiveness of the proposed algorithm through experiments, and the experimental results show that the average position error of the two groups of test experiments based on marking time and walking hybrid motion is 0.42% and 0.6%, respectively.

There are always frustrations for drivers in finding parking space and parking is costly in almost every major city in the world. In this paper, we propose a crowdsourcing solution by exploiting sensors in the smartphone to collect real-time parking availability information. In particular, we utilise a pedestrian dead reckoning (PDR) system to track the driver's trajectory to detect when he is about to leave his parking space. However, the effectiveness of a PDR system lies in its success in accurately estimating the user's moving distance and direction. In this work, we implement a waist-mounted-based PDR method on a smartphone that can measure the user's moving distance with a high accuracy. Furthermore, we design a map-matching algorithm to calibrate the direction errors from the gyro using building floor plans. The results of our experiment show that we can achieve about 98% accuracy in estimating the user's walking distance, with an overall location error of about 0.48 m.

Due to the rapid spreading of infectious disease COVID-19, numerous campus students are increasingly exposed to the dilemma and thus the provisioning of a safe environment becomes of vital importance. As a well-established approach, contact tracing could contain epidemic diseases spread. Since WiFi network could cover almost the whole campus and each student carries at least one WiFi capable device (i.e., smartphone), in this work, an epidemic contact tracing with campus WiFi network and smartphone-based pedestrian dead reckoning (PDR) is proposed, involving not only coarse-grained duration, but also fine-grained distance between students. First, students' location distribution and duration are captured by non-perception WiFi network logs with highly flexibility. Then, the convolutional neural network (CNN) model is utilized to real-time recognize landmarks in PDR positioning trajectory, followed by the particle filter algorithm to fuse both the PDR positioning results and detected landmarks, thereby calibrating PDR cumulative error and calculating the social distance between students. Next, we analyze the contact degree between students by integrating duration and social distance. Finally, in a campus environment with an coverage of about 600m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , we simulate a COVID-19 case study to validate proposed approach, showing that the average positioning error is reduced from 3.23m to 2.77m.

Many studies utilize the signal strength of short-range radio systems (such as WiFi, ultrasound and infrared) to build a radio map for indoor localization, by deploying a large number of beacon nodes within a building. The drawback of such an infrastructure-based approach is that the deployment and calibration of the system are costly and labor-intensive. Some prior studies proposed the use of Pedestrian Dead Reckoning (PDR) for indoor localization, which does not require the deployment of beacon nodes. In a PDR system, a small number of sensors are put on the pedestrian. These sensors (such as a G-sensor and gyroscope) are used to estimate the distance and direction that a user travels. The effectiveness of a PDR system lies in its success in accurately estimating the user's moving distance and direction. In this work, we propose a novel waist-mounted based PDR that can measure the user's step lengths with a high accuracy. We utilize vertical acceleration of the body to calculate the user's change in height during walking. Based on the Pythagorean Theorem, we can then estimate each step length using this data. Furthermore, we design a map matching algorithm to calibrate the direction errors from the gyro using building floor plans. The results of our experiment show that we can achieve about 98.26% accuracy in estimating the user's walking distance, with an overall location error of about 0.48 m.

The demand for pedestrian navigation has increased along with the rapid progress in mobile and wearable devices. This study develops an accurate and usable Step Length Estimation (SLE) method for a Pedestrian Dead Reckoning (PDR) system with features including a wide range of step lengths, a self-contained system, and real-time computing, based on the multi-sensor fusion and Fuzzy Logic (FL) algorithms. The wide-range SLE developed in this study was achieved by using a knowledge-based method to model the walking patterns of the user. The input variables of the FL are step strength and frequency, and the output is the estimated step length. Moreover, a waist-mounted sensor module has been developed using low-cost inertial sensors. Since low-cost sensors suffer from various errors, a calibration procedure has been utilized to improve accuracy. The proposed PDR scheme in this study demonstrates its ability to be implemented on waist-mounted devices in real time and is suitable for the indoor and outdoor environments considered in this study without the need for map information or any pre-installed infrastructure. The experiment results show that the maximum distance error was within 1.2% of 116.51 m in an indoor environment and was 1.78% of 385.2 m in an outdoor environment.

In this paper, a map-matching (MM) algorithm which combines an estimated position with digital road data is proposed. The presented algorithm using a virtual track is appropriate for a MEMS-based pedestrian dead reckoning (PDR) system, which can be used in mobile devices. Most of the previous MM algorithms are for car navigation systems and GPS-based navigation system, so existing MM algorithms are not appropriate for the pure DR-based pedestrian navigation system. The biggest problem of previous MM algorithms is that they cannot determine the correct road segment (link) due to the DR characteristics. In DR-based navigation system, the current position is propagated from the previous estimated position. This means that the MM result can be placed on a wrong link when MM algorithm fails to decide the correct link at once. It is a critical problem. Previous algorithms never overcome this problem because they did not consider pure DR characteristics. The MM algorithm using the virtual track is proposed to overcome this problem with improved accuracy. Performance of the proposed MM algorithm was verified by experiments.

In this paper, we present an implementation of indoor localization, where the location of an object is determined without using the outdoor infrastructure of GPS. Various work involving different technologies exist, but the field remains open to a solution which can attain widespread use, in consideration of cost and infrastructure needed for deployment. For our implementation, we localized a common smartphone in an area with many WiFi signals. The main method was through RSS fingerprinting which was able to achieve a mean error of 2.5 m, aside from outliers that drove the error to 16 m. To improve this, Pedestrian Dead Reckoning (PDR) techniques were leveraged in addition to the WiFi system. Realtime testing showed that the WiFi+PDR system was able to achieve a 2.28 m mean localization error, while it reached 2.62 m for the WiFi-only approach. Finally, a peer-to-peer approach was explored, in which neighboring smartphone peers were treated as pseudo access points to help eliminate the outlier errors that resulted from very similar RSS fingerprints. To measure distance between peers, an acoustic method was employed using 1 KHz sine waves. The Time Difference of Arrival (TDoA) was computed between peers, and the readings allowed for coarse estimates in 5-m bins. However, for very noisy environments, this frequency range may cause the acoustic system to be erroneous, possibly driving the error to as high as 18.01 m.

Technology progression in the last decades leads to many smartphone advancements, such as embedding variety of sensors for various measurement and applications. Positioning sensors (Accelerometer, Gyroscope, and Magnetometer) are one of the significant developments. Besides this, indoor positioning services on smartphones are the main advantage of these sensors. There are many indoor positioning applications, for instance; indoor navigation, asset tracking, controlling in warehouse, rescue operation, and entertainment applications. Nevertheless, precise position information through current positioning techniques is the main issue of these applications. The pedestrian dead reckoning (PDR) technique is one of the techniques in which the integration of onboard sensors is used for locating smartphones. Estimated distance, heading, and typical speed can be measured to determine the estimated position of the smartphone via using the PDR technique. The PDR technique offers a low positioning accuracy due to an existing unpredictable error of the embedded sensors. To solve this issue, fusing multi-sensors measurements is proposed, in this paper, to reduce the existing sensors drifts and errors. Further, the sensors' measurements with the previously estimated position are fused by using KALMAN Filter to determine the current location of the smartphone in each step of walking with higher accuracy. The obtained positioning accuracy through the proposed approach and based on trial experiments is 2 meters, which is equivalent to 10% improvement in comparison with state of the art.

Indoor localization using the magnetic fingerprint collected by the embedded sensors of smartphone has been under constant improvement with the widespread popularity of the smartphone. Most of the current systems rely on the Particle Filter (PF) or the Kalman Filter (KF) to combine the Pedestrian Dead Reckoning (PDR) with the magnetic or WiFi fingerprint for improving their accuracy. In this paper, a system using the PDR and the magnetic fingerprint is proposed for indoor localization, which is based on the combination of the Particle Filter (PF) and the Extend Kalman Filter (EKF). The system includes the Pedestrian Dead Reckoning (PDR) module and the magnetic fingerprint matching module. In particular, the hybrid indoor positioning algorithm which combines the Particle Filter (PF) and the Extend Kalman Filter (EKF) is proposed in the magnetic fingerprint matching module for the fusion of the results of the Pedestrian Dead Reckoning module and the magnetic fingerprint. This hybrid indoor positioning algorithm is the key component which can reduce the computation of the Particle Filter effectively and solve the inherent blindness and particles degeneration problem. The obtained results in the real scenarios show that our fusion system achieves better results than the widely adopted system in which the Particle Filter (PF) or the Kalman Filter (KF) is used. The evaluation shows the system achieves a localization accuracy about 1-2m on average in a large building.

In the cloud age, it is quite easy to collect sensory data from smartphones. With these sensory data, it is desired to provide various kinds of applications to serve the user. In this research, we aim at developing an indoor navigation system on smartphone using solely smartphone sensory data. There are many researches on indoor localization and navigation in the literature. Nevertheless, environmental sensors and/or wearable sensors are usually needed. This can be costly and inconvenient. In this paper, we propose a smartphone indoor localization system using only accelerometer and gyroscope data from the smartphone. The Pedestrian Dead Reckoning (PDR) approach is used to build this system. The PDR approach is simple and efficient though seems traditional. The major weakness of the PDR is that the estimation error would accumulate over time. Thus we propose to add so-called calibration marks which look like short arrows and are placed on both the floor plan and the ground. To use the system, the user first finds a calibration mark on the ground, stands on it and faces the right direction. He/she then moves the android icon (representing the user) on top of the calibration mark on the floor plan on the smartphone. When the user starts to move, the android icon also moves on the floor plan following the real-time estimation of step length and moving direction change for each step from accelerometer and gyroscope data. This is a prototype of an indoor navigation system that can become fully functional after an optimal path planning module is included. Experimental results of estimated walking trace tests show high accuracy. The system is promising and useful as long as a floor plan and calibration marks are built in advance.

WiFi-based indoor positioning is widely exploited thanks to the existing WiFi infrastructure in buildings and built-in sensors in smartphones. The techniques for indoor positioning require the high-density training data to archive high accuracy with high computation complexity. In this paper, the approach for indoor positioning systems which is called the maximum convergence algorithm is proposed to find the accurate location by the strongest receiver signal in the small cluster and K nearest neighbours (KNN) of other clusters. Also, the K-mean clustering is deployed for each access point to reduce the computation complexity of the offline databases. Moreover, the pedestrian dead reckoning (PDR) method and Kalman filter with the information from the received signal strength (RSS) and inertial sensors are applied to the WiFi fingerprinting to increase the efficiency of the mobile object's position. The different experiments are performed to compare the proposed algorithm with the others using KNN and PDR. The recommended framework demonstrates significant proceed based on the results. The average precision of this system can be lower than 1.02 meters when testing in the laboratory environment with an area of 7x7 m using three access points.

This study presents a method for analyzing workers’ behavior using indoor positioning technology and field test in the workplace. Recently, various indoor positioning methods, such as Wi-Fi, Bluetooth low energy (BLE), visible light communication, Japan’s indoor messaging system, ultra-wide band (UWB), and pedestrian dead reckoning (PDR), have been investigated. The development of these technologies allows tracking of movement of both people and/or goods in indoor spaces, people and/or goods behavior analysis is expected as one of the key technologies for operation optimization. However, when we use these technologies for human tracking, there are some problem as follows. 1) Many cases need to use dedicated facilities (e.g. UWB). 2) When we use smartphone as sensing device, battery depletion is one of the big problem (especially using PDR). 3) the accuracy is instability for tracking (e.g. Wi-Fi). Based on these matters, in this study we designed and developed an indoor positioning system using BLE positioning. And, we adopted smartphone for business use as sensing device, developed a smartphone application runs on android OS. Moreover, we conducted the field test of developed system at Itoki Corporation’s ITOKI Tokyo Innovation Center, SYNQA, office (Tokyo, Japan). Over 40 workers participated in this field test, and worker tracking log data were collected for 6 weeks. We analyzed the characteristics of the workers’ behavior using this log data as a prototyping.