A 2‐path approach for odd‐diameter‐constrained minimum spanning and Steiner trees

The rectilinear Steiner problem seeks the shortest tree made up of horizontal and vertical line segments that connects a set of points in the plane. The extra points where the segments meet are called Steiner points. Evolutionary algorithms for this problem have encoded rectilinear Steiner trees by extending codings of spanning trees to specify Steiner point choices for the spanning tree edges. These algorithms have been slow and have performed poorly on larger problem instances. The genetic algorithm presented here searches only the space of Steiner point assignments to the edges of a minimum rectilinear spanning tree. In tests on 45 instances of the rectilinear Steiner problem, it returns good, though never optimal, trees. The algorithm scales well; it evaluates chromosomes in time that is linear in the number of points, and its performance does not deteriorate as that number increases.

Rectilinear Steiner spanning trees are used in several phases of the VLSI physical design process when collections of terminals must be connected to a common electrical point. The authors present a new linear time heuristic algorithm for generating these rectilinear Steiner trees. They begin with minimal spanning trees and transform those configurations which are never found in the shortest Steiner trees. This decreases the length of the spanning trees. In addition to its speed, the algorithm is straightforward and can be implemented efficiently. Empirical results demonstrate that reductions of over 13% in length are possible, while an average of over 8% reduction is achieved. This compares very favorably to much more complex algorithms. The algorithm is recommended for applications where many spanning trees are needed in a very short time. >

This paper studies the minimum spanning tree problem on a graph with uncertain edge weights, which are formulated as uncertain variables. The concept of ideal uncertain minimum spanning tree (ideal UMST) is initiated by extending the definition of the uncertain [Formula: see text]-minimum spanning tree to reect the overall properties of the α-minimum spanning tree weights at any confidence level [Formula: see text]. On the basis of this new concept, the definition of uncertain distribution-minimum spanning tree is proposed in three ways. Particularly, by considering the tail value at risk from the perspective of risk management, the notion of uncertain [Formula: see text]-distribution-minimum spanning tree ([Formula: see text]-distribution-UMST) is suggested. It is shown that the [Formula: see text]-distribution-UMST is just the uncertain expected minimum spanning tree when [Formula: see text] = 0. For any [Formula: see text], this problem can be effectively solved via the proposed deterministic graph transformation-based approach with the aid of the [Formula: see text]-distribution-path optimality condition. Furthermore, the proposed definitions and solutions are illustrated by some numerical examples.

Degree-bounded minimum spanning trees

Motivated by the increasing need for fast distributed processing of large-scale graphs such as the Web graph and various social networks, we study a number of fundamental graph problems in the message-passing model, where we have k machines that jointly perform computation on an arbitrary n-node (typically, n > k) input graph. The graph is assumed to be randomly partitioned among the k ≥ 2 machines (a common implementation in many real world systems). The communication is point-to-point, and the goal is to minimize the time complexity i.e., the number of communication rounds, of solving various fundamental graph problems.We present lower bounds that quantify the fundamental time limitations of distributively solving graph problems. We first show a lower bound of Ω(n/k) rounds for computing a spanning tree (ST) of the input graph. This result also implies the same bound for other fundamental problems such as computing a minimum spanning tree (MST), breadth-first tree (BFS), and shortest paths tree (SPT). We also show an Ω(n/k2) lower bound for connectivity ST verification and other related problems. Our lower bounds develop and use new bounds in random-partition communication complexity.To complement our lower bounds, we also give algorithms for various fundamental graph problems, e.g., PageRank, MST, connectivity, ST verification, shortest paths, cuts, spanners, covering problems, densest subgraph, subgraph isomorphism, finding triangles, etc. We show that problems such as PageRank, MST, connectivity, and graph covering can be solved in O(n/k) time (the notation O hides polylog(n) factors and an additive polylog(n) term); this shows that one can achieve almost linear (in k) speedup, whereas for shortest paths, we present algorithms that run in O(n/Ok) time (for (1 + e)-factor approximation) and in O(n/k) time (for O(log n)-factor approximation) respectively.Our results are a step towards understanding the complexity of distributively solving large-scale graph problems.

Given an undirected, connected graph, the aim of the minimum branch-node spanning tree problem is to find a spanning tree with the minimum number of nodes of degree larger than 2. The problem is motivated by network design problems where junctions are significantly more expensive than simple end- or through-nodes, and are thus to be avoided. Unfortunately, it is NP-hard to recognize instances that admit an objective value of zero, rendering the search for guaranteed approximation ratios futile. We suggest to investigate a complementary formulation, called maximum path-node spanning tree, where the goal is to find a spanning tree that maximizes the number of nodes with degree at most two. While the optimal solutions (and the practical applications) of both formulations coincide, our formulation proves more suitable for approximation. In fact, it admits a trivial 1/2-approximation algorithm. Our main contribution is a local search algorithm that guarantees a ratio of 6/11, as well as showing that the problem is APX-hard, i.e., it does not allow a PTAS.

A method to design resilient protocols for spanning tree problems is proposed. The method consists of a generic resilient protocol that can be used for any spanning tree problem. A resilient protocol for a particular spanning tree problem can be obtained by adjusting various run-time parameters of the generic protocol. The generic protocol is designed by using the concepts of replacement sets that contain the links that can be used to replace a link that fails and replacement values that measure the change in the spanning tree when a link in a replacement set is used to recreate a spanning tree. The approach is as general as the common approach (for the case of spanning trees) because the generic protocol can solve a new spanning tree problem without an individual design. The protocols obtained with this method are efficient and easy to implement and verify because they are all derived from the generic protocol. >

In this paper, we study undirected multiple graphs of any natural multiplicity $$k > 1$$ . There are edges of three types: ordinary edges, multiple edges and multi-edges. Each edge of the last two types is a union of $$k$$ linked edges, which connect 2 or $$k + 1$$ vertices, correspondingly. The linked edges should be used simultaneously. If a vertex is incident to a multiple edge, it can be also incident to other multiple edges, and it can be the common ending vertex to $$k$$ linked edges of a multi-edge. If a vertex is the common end of some multi-edge, it cannot be the common end of any other multi-edge. Special attention is paid to the class of divisible multiple graphs. The main peculiarity of them is a possibility to divide the graph into $$k$$ parts, which are adjusted on the linked edges and which have no common edges. Each part is an ordinary graph. The definition of a multiple tree is stated and the basic properties of such trees are studied. Unlike ordinary trees, the number of edges in a multiple tree is not fixed. In the article, the estimation of the minimum and maximum number of edges in the divisible tree is stated and proved. Next, the definitions of the spanning tree and the complete spanning tree of a multiple graph are given. The criterion of completeness of the spanning tree is proved for divisible graphs. It is also proved that a complete spanning tree exists in any divisible graph. If the multiple graph is weighted, the minimum spanning tree problem and the minimum complete spanning tree problem can be set. In the article, we suggest a heuristic algorithm for the minimum complete spanning tree problem for a divisible graph.

We present a new bicriteria approximation algorithm for the degree-bounded minimum-cost spanning tree (MST) problem: Given an undirected graph with nonnegative edge weights and a degree bound B, find a spanning tree of maximum node-degree B and minimum total edge-cost. Our algorithm outputs a tree of maximum degree at most a constant times B and total edge-cost at most a constant times that of a minimum-cost degree-B-bounded spanning tree. While our new algorithm is based on ideas from Lagrangian relaxation, as is our previous work [SIAM J. Comput., 31 (2002), pp. 1783--1793], it does not rely on computing a solution to a linear program. Instead, it uses a repeated application of Kruskal's MST algorithm interleaved with a combinatorial update of approximate Lagrangian node-multipliers maintained by the algorithm. These updates cause subsequent repetitions of the spanning tree algorithm to run for longer and longer times, leading to overall progress and a proof of the performance guarantee. A second useful feature of our algorithm is that it can handle nonuniform degree bounds on the nodes: Given distinct bounds Bv for every node $v \in V$, the output tree has degree at most O(Bv + log|V|) for every $v \in V$. As before, the cost of the tree is at most a constant times that of a minimum-cost tree obeying all degree bounds.

In a complete graphwith independent uniform(or exponential) edge weights, letbe the minimum‐weight spanning tree (MST), andthe MST after deleting the edges of all previous trees. We show that each tree's weightconverges in probability to a constant, with, and we conjecture that. The problem is distinct from Frieze and Johansson's minimum combined weightofkedge‐disjoint spanning trees; indeed,. With an edge of weightw“arriving” at time, Kruskal's algorithm defines forests, initially empty and eventually equal to, each edge added to the first possible. Using tools of inhomogeneous random graphs we obtain structural results including that the fraction of vertices in the largest component ofconverges to some. We conjecture that the functionstend to time translations of a single function.

The Minimum Conflict Weighted Spanning Tree Problem is a variant of the Minimum Spanning Tree Problem in which, given a list of conflicting edges modelled as a conflict graph, we want to find a weighted spanning tree with the minimum number of conflicts as main objective function and minimize the total weight of spanning trees as secondary objective function. The problem is proved to be NP-Hard in its general form and finds applications in several real-case scenarios such as the modelling of road networks in which some movements are prohibited. We propose a genetic algorithm designed to minimize the number of conflict edge pairs and the total weight of the spanning tree. We tested our approach on benchmark instances, the results of our GA showed that we outperform the other approaches proposed in the literature.

Minimum Spanning Trees (MSTs) are ubiquitous in optimization problems in networks. Even though fast algorithms exist to solve the MST problem, real world applications are usually subject to constraints that do not let us apply such methods directly. In these cases we confront a version of the MST called the “Weighted Spanning Tree” (WST) in which we look for a spanning tree in a graph that satisfies other side constraints and is of minimum cost. In this paper we implement this constraint using a lower bound and learning to accelerate the search and thus reduce the solving time. We show that having this propagator is tremendously beneficial for solvers and we show the benefits of learning.

A general formulation is presented for continuum scaling limits of stochastic spanning trees. A spanning tree is expressed in this limit through a consistent collection of subtrees, which includes a tree for every finite set of endpoints in $\R^d$. Tightness of the distribution, as $\delta \to 0$, is established for the following two-dimensional examples: the uniformly random spanning tree on $\delta \Z^2$, the minimal spanning tree on $\delta \Z^2$ (with random edge lengths), and the Euclidean minimal spanning tree on a Poisson process of points in $\R^2$ with density $\delta^{-2}$. In each case, sample trees are proven to have the following properties, with probability one with respect to any of the limiting measures: i) there is a single route to infinity (as was known for $\delta > 0$), ii) the tree branches are given by curves which are regular in the sense of H\"older continuity, iii) the branches are also rough, in the sense that their Hausdorff dimension exceeds one, iv) there is a random dense subset of $\R^2$, of dimension strictly between one and two, on the complement of which (and only there) the spanning subtrees are unique with continuous dependence on the endpoints, v) branching occurs at countably many points in $\R^2$, and vi) the branching numbers are uniformly bounded. The results include tightness for the loop erased random walk (LERW) in two dimensions. The proofs proceed through the derivation of scale-invariant power bounds on the probabilities of repeated crossings of annuli.

In this paper, we aim at improving the vector lifting scheme dedicated to lossless coding of hyperspectral images by an optimal components ordering. For this purpose, we propose a three-stage algorithm. The first one consists in classifying the spectral components into separate clusters sharing similar characteristics. Then, within each cluster, the problem of ordering the components for inter-component coding is addressed. It is formulated as the design of a minimum spanning tree whose vertices are the spectral components. Finally, at the last stage, the spatial and spectral redundancies are simultaneously exploited by a vector lifting scheme. Experiments carried out on AVIRIS images indicate the outperformance of the proposed method w.r.t. the state-of-art coders.

A super-stabilizing [formula omitted]-approximation algorithm for dynamic Steiner trees