- Research Article
11
- 10.1115/1.2201728
Special Issue on Collaborative Engineering
- Jun 01, 2006
- Journal of Computing and Information Science in Engineering
- Ram D Sriram + 2 more +2
Special Issue on Collaborative Engineering
This paper presents a collaborative virtual design environment based on the globally shared product model conforming to STEP Standard. The platform provides an integration environment and changes paradigms between I_DEAS, Smarteam (PDM software) and Conceptual Innovation Design System (CIDS). The platform is illustrated for sugarcane harvester design analysis as an example, and provides a collaborative intelligent environment for the design of products, aiming at integrating people, process and data in the product development.
Special Issue on Collaborative Engineering
Special Issue on Collaborative Engineering
A novel approach to collaborative product design and development environment
This paper presents a new approach to collaborative product design and development environment from a holistic perspective that facilitates virtual multidisciplinary activities. The approach accomplishes integration of a distributed collaborative product development strategy and user-centred environment. It embraces product development representation, a novel systematic framework to manage a collaborative product development (CPD) system, and a novel human-centred system. The advantage of the developed system is that it encompasses a marketing information system (MIS), a human resources management (HRM) system, a supply chain management (SCM) system, communication media, an integrated product design studio, user-centred interfaces, and databases. The developed system has been tested, with results showing major benefits such as reduced product development lead time and cost. The tangible benefit of implementing this system is that the complex product developing process is organized in a systematic, consistent, and concurrent manner to enable collaboration among team members throughout the development process. It accomplishes a guiding sequence that assists inexperienced users to follow the complex process. Therefore, an efficient product development process is generated. One of the advantageous features of this system is that the barriers between people and incompatible computer systems, resulting from non-standardization, have been eliminated.
Read moreCollaborative Virtual Assembly Environment for Product Design
Collaborative virtual assembly environment is a vital computer-aided design tool in product design and can be used as a learning and training tool. It helps in supporting complex product design by enabling designers to collaborate and communicate with other designers involved in the product design. This paper proposes a collaborative virtual assembly environment built in two phases for the immersive and non-immersive environments. Phase one was developed in Unity 3D using Virtual Reality Toolkit (VRTK) and Steam VR. Whereas, phase two was built using Vizard and Vizible. This work aims to allow scientists and engineers to discuss the concept design in a real-time VR environment so that they can interact with the objects and review their work before it is deployed. This paper proposes the system architecture and describes the design and implementation of a collaborative virtual assembly environment. The outcome of this work is to be able to resolve communication and interaction problems that arise during the concept-design phase.
Read morePreliminary Aircraft Design in a Collaborative Multidisciplinary Design Environment
*† ‡ A novel flexible preliminary aircraft design system is presented which builds on DLR’s collaborative design environment. The system utilizes analysis modules, which are developed and provided by DLR disciplinary experts, and the unified data format CPACS for interdisciplinary coupling. The preliminary aircraft design system allows for physics based design evaluations and thus more accurate performance predictions for novel technologies and novel aircraft configurations. The workflow of the preliminary aircraft design system is used in an example design problem for a conventional short to medium range aircraft. The results of a single-point analysis as well as a sensitivity analysis are compared to results obtained from an established state-of-the-art preliminary aircraft design program. The comparison reveals that similar quantitative and qualitative results can be obtained. Increasing demand in communication and coordination, rather than technical issues stemming from the distributed computing approach, have been identified as obvious challenges in the development of such complex workflow.
Read moreDesign and implementation of a Web-based distributed collaborative design environment
This paper reviews work on distributed collaborative virtual design environments and the emerging technology of metacomputing. The paper discusses the design of distributed collaborative design environments using metacomputing, for example Globus, to provide intensive data computing via an asynchronous collection of loosely synchronous components. The essential component, Globus, focuses on defining a toolkit of low-level services for security, communication, resource location, resource allocation, process management, and data access. Based on this approach, the requirements for concept, functionality and performance of the design environments are provided. The key functions in the distributed collaborative design environments such as analysis, visualisation, security and database management, particularly the 3D design storage and visualisation, are also discussed. Finally, further work on implementing Globus-based distributed collaborative design environments is highlighted.
Read moreResearch on collaborative virtual environment for 3D product design
Collaborative virtual environment for product design occurs between people and often involves 3D objects. Fruitful cooperation is helped by natural and intuitive way of communication and interaction, for which responsiveness and consistency are leading factors. In order to guarantee consistency and improve responsiveness, a novel concurrency control scheme is first proposed. In our scheme, non-exclusive concurrent manipulations are merged so as to undo a small quantity of manipulations rather than all the operations triggered by users who are not granted, therefore, a majority of concurrent operations are collision-free and executed immediately to maximize responsiveness. Moreover, notification and visual indicator mechanism are used to avoid unnecessary concurrency collision. The implementation of collaborative virtual environment named VRCAD is then introduced in detail, including system architecture, concurrency control strategy and communication facilities. Experiment and practice show that our concurrency control scheme is effective and efficient for collaborative virtual environment involving 3D objects.
Read moreCollaborative design review in a distributed environment
Collaborative design review in a distributed environment
Collaborative Virtual Design Environments: A Treatise of the Supporting Technologies
The fourth generation of CAD/E systems appears in the form of collaborative virtual design environments (CVDEs). These distributed design support systems are based on a still developing new paradigm. Consequently, the standard architecture, functionality, and implementation of CVDEs are not fully elaborated yet. It is believed that six fundamental components are needed for a fully featured implementation: i. enhanced CAD/E kernel functionality, ii. multi-site imagining and advanced interaction, iii. high-speed communication and multi-channel networking, iv. collaboration support and virtual presence, v. knowledge asset management, and vi. interface to virtual enterprises. This paper investigates the supporting technologies with the aim to explore what is available, satisfactory, compatible, and experienced. The authors found that remarkable results have been achieved in terms of the supporting technologies, but for some CVDEs functions the technologies are not available so far. Currently the largest problem is to integrate the highly heterogeneous technologies into one coherent system. This is due partly to the inherent complexity of the problem, and partly to the uneven maturity of the technologies. It can be predicted without any hazard that dramatic changes will be witnessed soon in this front of research and development.
Read moreGroupMorph:
Virtual reality technology is increasingly being applied to globally distributed teams engaged in collaborative product design. Observations of product design teams have suggested at least four distinct modes of collaboration-complementary, competitive, peer-to-peer, and leader-follower. Another insight from observation is that collaboration consists of fluid transitions between these modes in the accomplishment completion of the design task, driven by a flexible process of subgrouping and regrouping which reflects the structure and progress of the task. Yet most collaborative virtual environment systems support only one mode of collaboration-peer-to-peer-and those that do explicitly support multiple modes (or even individual roles) do not allow fluid transitions between them in the context of the same task. In addition, no explicit support is provided to allow subgroups to be formed and dissolved. To address this problem, a collaborative virtual environment (CVE) for product design that supports multiple collaboration modes and fluid transitions is proposed; two metaphors for collaborative product design (collaboration tree and infinitely recursive conference room) are introduced; the use of a collaboration tree interface widget is detailed; and the Simple Shared Virtual Environment (SSVE) toolkit for collaborative virtual environments is described.
Read moreTracking of design changes for collaborative product development
Market demands are moving manufacturing from mass production to mass customization. To quickly respond to customer needs, product development teams have to work together in a collaborative design environment. The paper presents a product data driven approach to tracking of design changes in a collaborative design environment. In this research, design processes are analyzed to identify product data for tracking design changes. The relationships between product data are established using predecessor-successor, master-subordinate, and geometric constraint relationship types. Forward tracking and backward tracking are designed and implemented to identify impacts of a design change. A prototype system has been implemented to verify the effectiveness of the approach. Finally, a milling machine fixture is used as a design example to show how this approach works. The proposed approach provides a fundamental mechanism to promptly notify other designers of design changes in a collaborative design environment.
Read moreSelf-Sustainability of Effective Team Performance in a Collaborative Design Environment
A number of studies have contributed to the design and development of effective collaborative design environments. They have focused on the communication of interrelated team members, the creation of shared understanding and vision, and shared discovery of design solutions. However, only few studies have focused on the design or the development of collaborative design environments that would allow all the members of the design team to plan their processes, enact according to their plan, monitor and influence their performance in following the planned processes, and prevent them from deviating unconsciously from their desired performance. This paper introduces the constructs of a distributed process management environment (DPME) which was designed to stimulate self-sustainability of effective team performance in an collaborative design environment by supporting: (a) the shared creation of a process plan, (b) the enactment of a process according to its plan, (c) the monitoring of the outcome and process of the team, and (d) the control of the team performance. It presents the findings of a study conducted for evaluating the effectiveness of the DPME in meeting the conditions required for collaborative building design.
Read moreStudy results: the use of virtual environments for product design
Today, many product development organizations are investigating the use of multi-functional teams coupled with emerging interactive virtual environment technologies to create more robust, collaborative virtual design environments. Within these environments design team mates could simultaneously enter a virtual product design, and jointly evaluate design issues, ideas, and parameters-each from their own experience, perspective, viewpoint and functional responsibility. However, the proliferation and variety of commercially available virtual environment systems has complicated system selection. This paper presents results of a study that investigated the use of four commercial visual displays on the design review process. Study results indicated that the sense of presence experienced while conducting a design review plays an important role in improving design review practices and that some devices are considerably better than others.
Read moreResource Conflict Resolution Strategy in Collaborative Design Environment
Shortcomings of current conflict resolution methods in solving the problems of disordered competition for design resource in networked design environment are analyzed. By introducing the design structure matrix (DSM) to the planning process of design task, a mathematic description model in collaborative design considering the conflict causes as resource conflict, process conflict and design conflict is given. The reconstruction method of the DSM as well as the DSM based matrix search algorithm is given, based on which the problem of design locking and long waiting because of limited resource in the collaborative design process can be successfully solved. Finally, the design of a bridge crane is used as an example to demonstrate the successful application of the proposed resource conflict resolution strategy in collaborative Design environment.
Read moreA web-enabled PDM system in a collaborative design environment
A web-enabled PDM system in a collaborative design environment
Dynamic Segmentation and Incremental Editing of Boundary Representations in a Collaborative Design Environment
Currently boundary representations (b-reps) are a convenient means to exchange solid models between applications (e.g., design, manufacturing, inspection) in a distributed/collaborative design environment. There are two widely used approaches that help maintain the consistency of b-reps between applications, e.g., when a b-rep is modified in one application and needs to be updated in the other. One approach involves using a common database of b-reps where consistency is automatically guaranteed. The other approach involves using a repeated transfer of the entire b-rep using ftp-like protocols. The former results in a system that is not truly distributed and the latter results in consuming large amounts of network bandwidth and unacceptable latencies. This paper seeks to alleviate the abovementioned disadvantages by introducing a scheme for the incremental exchange of b-reps (i.e., for incrementally updating a pre-edit model to be consistent with the post-edit model) between applications in a collaborative design environment. The significance of this work is that only parts of b-reps (not the complete b-rep), which have been edited, need be transferred to update b-reps at distributed locations thereby reducing network bottlenecks during collaborative design activities.
Read more