A comprehensive review of COVID-19 detection with machine learning and deep learning techniques

COVID-19 is highly infectious and causes acute respiratory disease. Machine learning (ML) and deep learning (DL) models are vital in detecting disease from computerized chest tomography (CT) scans. The DL models outperformed the ML models. For COVID-19 detection from CT scan images, DL models are used as end-to-end models. Thus, the performance of the model is evaluated for the quality of the extracted feature and classification accuracy. There are four contributions included in this work. First, this research is motivated by studying the quality of the extracted feature from the DL by feeding these extracted to an ML model. In other words, we proposed comparing the end-to-end DL model performance against the approach of using DL for feature extraction and ML for the classification of COVID-19 CT scan images. Second, we proposed studying the effect of fusing extracted features from image descriptors, e.g., Scale-Invariant Feature Transform (SIFT), with extracted features from DL models. Third, we proposed a new Convolutional Neural Network (CNN) to be trained from scratch and then compared to the deep transfer learning on the same classification problem. Finally, we studied the performance gap between classic ML models against ensemble learning models. The proposed framework is evaluated using a CT dataset, where the obtained results are evaluated using five different metrics The obtained results revealed that using the proposed CNN model is better than using the well-known DL model for the purpose of feature extraction. Moreover, using a DL model for feature extraction and an ML model for the classification task achieved better results in comparison to using an end-to-end DL model for detecting COVID-19 CT scan images. Of note, the accuracy rate of the former method improved by using ensemble learning models instead of the classic ML models. The proposed method achieved the best accuracy rate of 99.39%.

Metabolic dysfunction-associated steatotic liver disease (MASLD) can progress to metabolic dysfunction-associated steatohepatitis (MASH) and liver fibrosis, contributing to a heavier global health burden. Non-invasive diagnostic tools developed using machine learning (ML) and deep learning (DL), two representative artificial intelligence algorithms, are increasingly being explored for MASH and its related fibrosis assessment. This study aimed to compare the diagnostic performance of different ML and DL models and identify the top-performing models for diagnosing MASH and associated liver fibrosis. A systematic review and meta-analysis were conducted across PubMed, Web of Science, Embase and Cochrane Library from inception to May 18, 2025. Pooled area under the receiver operator characteristic curve (AUROC) values with 95 % confidence interval (CI) were calculated. Accuracy, specificity, sensitivity, positive predictive values, and negative predictive values were also recorded. Of 4,314 studies initially identified, 106 met the inclusion criteria, with 35 studies (ML: n=28; DL: n=7) providing data for analysis. Logistic Regression and Neural Network are the most commonly algorithms applied in ML and DL, respectively. The pooled AUROCs for diagnosing MASH were 0.833 (95 %CI: 0.806-0.860) for ML models and 0.841 (95 %CI: 0.782-0.900) for DL models. Light Gradient Boosting Machine (LightGBM) and ResNet50 were the best-performing models for diagnosing MASH within ML and DL algorithms, respectively, achieving corresponding AUROCs of 0.920 (95 %CI: 0.916-0.924) and 0.960 (95 %CI: 0.951-0.969). For fibrosis diagnosis, ML models had a pooled AUROC of 0.826 (95 %CI: 0.792-0.860), with Categorical Boosting (CatBoost) achieving the highest AUROC of 0.960 (95 %CI: 0.950-0.970). DL models yielded the pooled AUROC of 0.875 (95 %CI: 0.816-0.934) for fibrosis diagnosis. Both ML and DL models demonstrated strong diagnostic performance for MASH and liver fibrosis, with DL achieving marginally higher AUROCs. AI-driven approaches show promise in MASLD management.

Social media platforms provide valuable insights into mental health trends by capturing user-generated discussions on conditions such as depression, anxiety, and suicidal ideation. Machine learning (ML) and deep learning (DL) models have been increasingly applied to classify mental health conditions from textual data, but selecting the most effective model involves trade-offs in accuracy, interpretability, and computational efficiency. This study evaluates multiple ML models, including logistic regression, random forest, and LightGBM, alongside DL architectures such as ALBERT and Gated Recurrent Units (GRUs), for both binary and multi-class classification of mental health conditions. Our findings indicate that ML and DL models achieve comparable classification performance on medium-sized datasets, with ML models offering greater interpretability through variable importance scores, while DL models are more robust to complex linguistic patterns. Additionally, ML models require explicit feature engineering, whereas DL models learn hierarchical representations directly from text. Logistic regression provides the advantage of capturing both positive and negative associations between features and mental health conditions, whereas tree-based models prioritize decision-making power through split-based feature selection. This study offers empirical insights into the advantages and limitations of different modeling approaches and provides recommendations for selecting appropriate methods based on dataset size, interpretability needs, and computational constraints.

Coastal aquifers are vital for sustaining ecosystems and providing freshwater for agriculture and domestic use. However, rising groundwater salinity in these regions demands innovative approaches for accurate modeling and prediction. In recent decades, machine learning (ML) and deep learning (DL) techniques have been extensively used across various water resource management fields, often yielding promising outcomes. This review examines the growing usage of ML and DL techniques in modeling groundwater salinity in coastal aquifers. The analysis is based on 104 peer-reviewed journal articles including the review articles indexed in PubMed, ScienceDirect, Google Scholar, Scopus, and SpringerLink using keywords like "saltwater intrusion", "machine learning", “deep learning”, and "groundwater salinity". The review discusses recent advancements, challenges, and future directions for improving ML model accuracy and applicability. Studies reveal an increasing reliance on ML techniques to predict groundwater salinity and manage seawater intrusion across various coastal geological settings. Researchers have employed a range of ML models, from traditional methods like Artificial Neural Networks and Adaptive Neuro Fuzzy Inference Systems to advanced DL-based models like Convolutional Neural Networks and Long Short-Term Memory Networks, often using ensemble methods to enhance accuracy. Key findings include the top-tier output of ensemble and optimized models, including Random Forest and Grasshopper Optimization Algorithm-XGBoost. These studies highlight the importance of model selection, input variable ranking, and computational efficiency, demonstrating ML's global relevance in environmental management. The review highlights the prospects of ML, DL, and ensemble models to redefine groundwater management in coastal aquifers, offering more effective and sustainable solutions to the challenges posed by groundwater salinity and saltwater intrusion. Future advancements will focus on further integrating DL, explainable artificial intelligence, and ensemble approaches, along with other innovative techniques, to explore sparsely studied variables, model new or unique study areas, and apply ML methods for managing groundwater salinity.

Evaluation of multispectral imaging for freeze damage assessment in strawberries using AI-based computer vision technology

In an open source software development environment, it is hard to decide the number of group members required for resolving software issues. Developers generally reply to issues based totally on their domain knowledge and interest, and there are no predetermined groups. The developers openly collaborate on resolving the issues based on many factors, such as their interest, domain expertise, and availability. This study compares eight different algorithms employing machine learning and deep learning, namely—Convolutional Neural Network, Multilayer Perceptron, Classification and Regression Trees, Generalized Linear Model, Bayesian Additive Regression Trees, Gaussian Process, Random Forest and Conditional Inference Tree for predicting group size in five open source software projects developed and managed using an open source development framework GitHub. The social information foraging model has also been extended to predict group size in software issues, and its results compared to those obtained using machine learning and deep learning algorithms. The prediction results suggest that deep learning and machine learning models predict better than the extended social information foraging model, while the best-ranked model is a deep multilayer perceptron((R.M.S.E. sequelize—1.21, opencv—1.17, bitcoin—1.05, aseprite—1.01, electron—1.16). Also it was observed that issue labels helped improve the prediction performance of the machine learning and deep learning models. The prediction results of these models have been used to build an Issue Group Recommendation System as an Internet of Things application that recommends and alerts additional developers to help resolve an open issue.

This article investigates the identification of hate speech on social media using machine learning and deep learning techniques. The research uses metrics such as F-measure, AUC-ROC, precision, accuracy, and recall assessing the effectiveness of various tactics. The findings indicate that deep learning models, particularly the bidirectional long short-term memory (BiLSTM) architecture, consistently outperform other methods in categorization tasks. The research emphasizes the importance of sophisticated neural network designs in identifying the intricacies of hostile and offensive content online. The study offers insights for promoting early identification and prevention of cyberbullying, improving secure and inclusive online environments. Future research may explore real-time detection systems, hybrid approaches, or the integration of complementary components to enhance and improve innovative technology in tackling this significant social issue. A sample tweet was annotated by specialists who categorize tweets as hate speech, offensive language, or neutral. The researchers applied shallow learning methodologies and integrated word embeddings like Word2Vec and GloVe to enhance the efficacy of deep learning models. The results indicate that BiLSTM surpasses shallow learning methods in detecting hate speech on Twitter, highlighting the efficacy of deep learning approaches in recognizing and tracking hate speech on social media platforms. When comparing different deep learning and machine learning models on different datasets, the results reveal that deep learning techniques are usually more effective. A reasonably high level of accuracy is achieved by KNN and SVM among classical algorithms, whereas Naïve Bayes performs the poorest. While deep learning approaches provide better results, tree-based models such as Random Forest and Decision Trees offer more consistent accuracy. Models based on neural networks, such as LSTM, CNN, and BI-LSTM, perform well, with LSTM-based methods excelling in particular. The most successful strategy for classification problems is the model presented, which obtains the greatest accuracy, precision, recall, F1-score of 95%. The research aids in the development of advanced tools and methodologies to mitigate hate speech on social media and foster positive online interactions. Future research may investigate alternative deep learning architectures, such as transformers, to enhance hate speech detection efficacy. The advancement of interpretable AI methodologies for identifying hate speech and delivering transparent forecasts might enhance user confidence and facilitate better content moderation decisions.

<p>The need for accurate solar energy forecasting is paramount as the global push towards renewable energy intensifies. We aimed to provide a comprehensive analysis of the latest advancements in solar energy forecasting, focusing on Machine Learning (ML) and Deep Learning (DL) techniques. The novelty of this review lies in its detailed examination of ML and DL models, highlighting their ability to handle complex and nonlinear patterns in Solar Irradiance (SI) data. We systematically explored the evolution from traditional empirical, including machine learning (ML), and physical approaches to these advanced models, and delved into their real-world applications, discussing economic and policy implications. Additionally, we covered a variety of forecasting models, including empirical, image-based, statistical, ML, DL, foundation, and hybrid models. Our analysis revealed that ML and DL models significantly enhance forecasting accuracy, operational efficiency, and grid reliability, contributing to economic benefits and supporting sustainable energy policies. By addressing challenges related to data quality and model interpretability, this review underscores the importance of continuous innovation in solar forecasting techniques to fully realize their potential. The findings suggest that integrating these advanced models with traditional approaches offers the most promising path forward for improving solar energy forecasting.</p>

Machine learning and deep learning prediction of patient specific quality assurance in breast IMRT radiotherapy plans using Halcyon specific complexity indices

To evaluate the diagnostic performance of Machine Learning (ML) and Deep Learning (DL) models for predicting preoperative Lymph Node Metastasis (LNM) in Colorectal Cancer (CRC) patients. A systematic review and meta-analysis were conducted following PRISMA-DTA and AMSTAR-2 guidelines. We searched PubMed, Web of Science, Embase, and Cochrane Library databases until February 16, 2024. Study quality and risk of bias were assessed using the QUADAS-2 tool. Data were analyzed using STATA v18, applying random-effects models to all analyses. Twelve studies involving 8321 patients were included, with most published in 2021-2024 (9/12). The pooled AUC of ML models for predicting LNM in CRC patients was 0.87 (95% CI: 0.82-0.91, I2:86.17) with a sensitivity of 78% (95% CI: 69-87%) and a specificity of 77% (95% CI: 64%-90%). In addition, when assessing the AUC reported by radiologists, both junior and senior radiologists had similar performance, significantly lower than the ML models. (P < 0.001). Subgroup analysis revealed higher AUCs in prospective studies (0.95, 95% CI: 0.87-1) compared to retrospective studies (0.85, 95% CI: 0.81-0.89) (P = 0.03). Studies without external validation exhibited significantly higher AUCs than those with external validation (P < 0.01). While there was no significant difference in AUC and sensitivity between the T1-T2 and T2-T4 stages, specificity was significantly higher in the T2-T4 stages than the low stages of T1 and T2 (95%, 95% CI: 92-98% vs. 61%, 95% CI: 44-78%; P < 0.01). ML models demonstrate strong potential for preoperative LNM staging and treatment planning in CRC, potentially reducing the need for additional surgeries and related health and financial burdens. Further prospective multicenter studies, with standardized reporting of algorithms, modality parameters, and LNM staging, are needed to validate these findings.

Although advancements in remote sensing technology have facilitated quick capture and identification of the source and location of oil spills in water bodies, the presence of other biogenic elements (lookalikes) with similar visual attributes hinder rapid detection and prompt decision making for emergency response. To date, different methods have been applied to distinguish oil spills from lookalikes with limited success. In addition, accurately modeling the trajectory of oil spills remains a challenge. Thus, we aim to provide further insights on the multi-faceted problem by undertaking a holistic review of past and current approaches to marine oil spill disaster reduction as well as explore the potentials of emerging digital trends in minimizing oil spill hazards. The scope of previous reviews is extended by covering the inter-related dimensions of detection, discrimination, and trajectory prediction of oil spills for vulnerability assessment. Findings show that both optical and microwave airborne and satellite remote sensors are used for oil spill monitoring with microwave sensors being more widely used due to their ability to operate under any weather condition. However, the accuracy of both sensors is affected by the presence of biogenic elements, leading to false positive depiction of oil spills. Statistical image segmentation has been widely used to discriminate lookalikes from oil spills with varying levels of accuracy but the emergence of digitalization technologies in the fourth industrial revolution (IR 4.0) is enabling the use of Machine learning (ML) and deep learning (DL) models, which are more promising than the statistical methods. The Support Vector Machine (SVM) and Artificial Neural Network (ANN) are the most used machine learning algorithms for oil spill detection, although the restriction of ML models to feed forward image classification without support for the end-to-end trainable framework limits its accuracy. On the other hand, deep learning models’ strong feature extraction and autonomous learning capability enhance their detection accuracy. Also, mathematical models based on lagrangian method have improved oil spill trajectory prediction with higher real time accuracy than the conventional worst case, average and survey-based approaches. However, these newer models are unable to quantify oil droplets and uncertainty in vulnerability prediction. Considering that there is yet no single best remote sensing technique for unambiguous detection and discrimination of oil spills and lookalikes, it is imperative to advance research in the field in order to improve existing technology and develop specialized sensors for accurate oil spill detection and enhanced classification, leveraging emerging geospatial computer vision initiatives.

The financial sector has greatly impacted the monetary well-being of consumers, traders, and financial institutions. In the current era, artificial intelligence is redefining the limits of the financial markets based on state-of-the-art machine learning and deep learning algorithms. There is extensive use of these techniques in financial instrument price prediction, market trend analysis, establishing investment opportunities, portfolio optimization, etc. Investors and traders are using machine learning and deep learning models for forecasting financial instrument movements. With the widespread adoption of AI in finance, it is imperative to summarize the recent machine learning and deep learning models, which motivated us to present this comprehensive review of the practical applications of machine learning in the financial industry. This article examines algorithms such as supervised and unsupervised machine learning algorithms, ensemble algorithms, time series analysis algorithms, and deep learning algorithms for stock price prediction and solving classification problems. The contributions of this review article are as follows: (a) it provides a description of machine learning and deep learning models used in the financial sector; (b) it provides a generic framework for stock price prediction and classification; and (c) it implements an ensemble model—“Random Forest + XG-Boost + LSTM”—for forecasting TAINIWALCHM and AGROPHOS stock prices and performs a comparative analysis with popular machine learning and deep learning models.

Data is one of the most important limiting factors of deep machine learning (ML) model in drilling applications. Though a big size of historical data can be available, high-quality cleaned and labeled data is usually limited. In this case study, we show that with limited labeled data, physics-based data augmentation combined with unsupervised learning significantly improves both stability and accuracy in bit wear ML model. It provides a pathway to overcome labeled data shortage and field data quality limitations. Labeled bit wear data is usually limited because only the final bit dull state can be labeled using dull photos for the entire drilling distance. To overcome this difficulty, an encoder-decoder unsupervised ML framework based on Bi-directional LSTM architecture is first applied to the data of entire drilling distance to extract and maximize data learnings. Then, a physics-based wear estimator is implemented in the learned latent space to augment labeled wear dataset, guided by true wear labels and offset-well data. Weighting factor in loss function is applied to optimize augmented and true datasets in final supervised learning step. The proposed real-time bit wear model is built on a combination of physics-based data augmentation and unsupervised data learning method. The model is applied on multiple field bit runs. Results show that by implementing the unsupervised data learnings only, the prediction accuracy is improved by 30% compared to the baseline ML model. By combining physics-based augmentation, the accuracy is further improved by 10%. More importantly, adding physics-based data augmentation significantly reduces prediction variance and unphysical wear outputs, therefore improving prediction stability by more than 30%. It should be noted that the prediction stability of AI/ML model is crucial in real-time application and decision making. The results show physics-based data augmentation not only increases the size of label dataset and prevents model overfitting, but also applies physics-based guidance to the ML model effectively. It is learned weighting factor plays a crucial role in balancing loss contributions from true wear labels and physics-based labels. While low weighting factor of physics-based labels diminishes the augmented data, high weighting factor disrespects the true wear labels leading to a high prediction bias. Overall, the bit wear model study shows physic-based data augmentation combined with unsupervised data learning can effectively improve model accuracy, stability, and overcome labeled data shortage difficulty. The proposed paper shows a case study for the bit wear ML model using a combination of physics-based data augmentation and unsupervised data learning. While labeled data is one of the major challenges of ML models in many drilling applications, this study provides a pathway to improve both accuracy and stability of deep ML models with limited labeled data.

Simple SummaryWheat (Triticum aestivum L.) breeding programs mainly focus on improving grain yield, biotic and abiotic stress tolerance, and end-use quality traits. End-use quality and processing traits are the combinations of various predefined parameters. Genomic selection (GS) opens the potential for selecting improved end-use quality lines. This study explored the potential of the machine and deep learning-based GS models for predicting end-use quality traits in wheat. Deep models were superior to traditional statistical and Bayesian models under all the prediction scenarios. The high accuracy observed for end-use quality traits in this study support predicting them in early generations, leading to the advancement of superior genotypes to more extensive grain yield trails.Breeding for grain yield, biotic and abiotic stress resistance, and end-use quality are important goals of wheat breeding programs. Screening for end-use quality traits is usually secondary to grain yield due to high labor needs, cost of testing, and large seed requirements for phenotyping. Genomic selection provides an alternative to predict performance using genome-wide markers under forward and across location predictions, where a previous year’s dataset can be used to build the models. Due to large datasets in breeding programs, we explored the potential of the machine and deep learning models to predict fourteen end-use quality traits in a winter wheat breeding program. The population used consisted of 666 wheat genotypes screened for five years (2015–19) at two locations (Pullman and Lind, WA, USA). Nine different models, including two machine learning (random forest and support vector machine) and two deep learning models (convolutional neural network and multilayer perceptron) were explored for cross-validation, forward, and across locations predictions. The prediction accuracies for different traits varied from 0.45–0.81, 0.29–0.55, and 0.27–0.50 under cross-validation, forward, and across location predictions. In general, forward prediction accuracies kept increasing over time due to increments in training data size and was more evident for machine and deep learning models. Deep learning models were superior over the traditional ridge regression best linear unbiased prediction (RRBLUP) and Bayesian models under all prediction scenarios. The high accuracy observed for end-use quality traits in this study support predicting them in early generations, leading to the advancement of superior genotypes to more extensive grain yield trails. Furthermore, the superior performance of machine and deep learning models strengthens the idea to include them in large scale breeding programs for predicting complex traits.

A kidney tumor is a dangerous disease that affects mostly males more than females, with a high mortality rate. The kidneys help to maintain fluid and solute balance in the body by filtering waste materials. A kidney tumor is categorized into three types: benign, malignant and indolent. Renal Cell Carcinoma (RCC) is a form of malignant tumor caused by defective genes. RCC classification is essential for further treatment planning. Computed Tomography (CT), Magnetic Resonance Imaging (MRI), and ultrasound are some of the imaging modalities used to diagnose kidney tumors. Ultrasound is a screening technology that differentiates between solid and cystic lesions. However, cross-sectional imaging systems such as CT and MRI are also essential for the detection of kidney tumors. Mostly, CT is used for the identification of tumors. The goal of this review paper is to evaluate Deep Learning (DL) and Machine Learning (ML) models for detecting kidney tumors. Initially, existing review articles are evaluated to analyze previous techniques. After that, it offers a thorough examination of ML and DL models along with their datasets and limitations. Furthermore, this paper analyzes segmentation and classification-based techniques for detecting kidney tumors. The analysis of limitations of DL, ML, segmentation and classification techniques is utilized to highlight the challenges. Afterwards, different types of datasets are analyzed in this review paper to predict the best dataset. The limitations in this review paper help to construct a novel model for the detection of kidney tumors.