A Decomposition and Reconstruction Based Hybrid Time Series Model for Short-Term Wind Power Forecasting

Renewable energies, such as solar and wind power, have become promising sources of energy to address the increase in greenhouse gases caused by the use of fossil fuels and to resolve the current energy crisis. Integrating wind energy into a large-scale electric grid presents a significant challenge due to the high intermittency and nonlinear behavior of wind power. Accurate wind power forecasting is essential for safe and efficient integration into the grid system. Many prediction models have been developed to predict the uncertain and nonlinear time series of wind power, but most neglect the use of Bayesian optimization to optimize the hyperparameters while training deep learning algorithms. The efficiency of grid search strategies decreases as the number of hyperparameters increases, and computation time complexity becomes an issue. This paper presents a robust and optimized long-short term memory network for forecasting wind power generation in the day ahead in the context of Ethiopia’s renewable energy sector. The proposal uses Bayesian optimization to find the best hyperparameter combination in a reasonable computation time. The results indicate that tuning hyperparameters using this metaheuristic prior to building deep learning models significantly improves the predictive performances of the models. The proposed models were evaluated using MAE, RMSE, and MAPE metrics, and outperformed both the baseline models and the optimized gated recurrent unit architecture.

A new distributed decomposition–reconstruction–ensemble learning paradigm for short-term wind power prediction

A new intelligent method based on combination of VMD and ELM for short term wind power forecasting

An accurate forecast of wind power plays an increasingly important role in economic dispatch and power system operations. Nevertheless, the randomness, intermittence, and volatility of wind power pose great challenges in power system balance. To improve the forecasting accuracy of wind power, a multi-scale fusing deep learning method is proposed to forecast short-term wind power for multiple wind turbine generators in a wind farm. The inherent spatio-temporal characteristics are studied by dividing the time scale into a small-scale nearby part and a large-scale historical part. The fine-grained dynamic characteristics in the small-scale nearby part are extracted using stacked three-dimensional convolutional neural networks (3D-CNN), and the steady-state characteristics in the large-scale historical part are extracted using Spatio-Temporal Long Short-Term Memory (ST-LSTM) units. Then, wind power for multiple wind turbine generators can be forecasted by fusing the two deep learning channels. An actually collected wind power dataset is used to validate the effectiveness of the proposed method, which is exported from 33 wind turbine generators in a wind farm located in a northwestern province of China. The experimental results show that the proposed wind power forecasting method can improve the forecasting accuracy effectively when compared with the state-of-the-art wind power forecasting methods.

Accurate and stable wind power forecasting is an inevitable requirement for efficient use of renewable energy. This paper proposes a short-term wind power combination forecasting method based on mode decomposition and feature extraction. The original wind speed time series is decomposed into multiple subsequences by the ensemble empirical mode decomposition (EEMD). The generalized mutual information (GMI) is used to extract the optimal input feature set of each subsequence. The prediction values of each subsequence are obtained based on the least squares support vector machine (LSSVM) model, and then the final prediction results are obtained by combining them. Finally, the paper proves that the proposed method can predict short-term wind power more accurately and stably by setting up the contrast experiment.

Energy storage scheduling design on friendly grid wind power

An improved residual-based convolutional neural network for very short-term wind power forecasting

This study addresses the critical role of wind power forecasting in ensuring stable and reliable power system operations. Wind power forecasting is critical for the efficient operation of plants, time scheduling, and the balancing of power generation with grid integration systems. Due to its dependency on dynamic climatic conditions and associated factors, accurate wind power forecasting is challenging. The research delves into various aspects, including input data, input selection techniques, data pre-processing, and forecasting methods, with the aim of motivating researchers to design highly efficient online/offline models on weather-based data. The overarching goal is to enhance the reliability and stability of power systems while optimizing energy resource utilization. The analysis reveals that hybrid models offer more accurate results, highlighting their significance in the current era. This study investigates different Wind Power Forecasting (WPF) models from existing literature, focusing on input variables, time horizons, climatic conditions, pre-processing techniques, and sample sizes that affect model accuracy. It covers statistical models like ARMA and ARIMA, along with AI techniques including Deep Learning (DL), Machine Learning (ML), and neural networks, to estimate wind power.

The uncertainty of wind power as the main obstacle of its integration into the power grid can be addressed by an accurate and efficient wind power forecast. Among the various wind power forecasting methods, machine learning (ML) algorithms, are recognized as a powerful wind power forecasting tool, however, their performance is highly dependent on the proper tuning of their hyperparameters. Common hyperparameter tuning methods such as grid search or random search are time-consuming, computationally expensive, and unreliable for complex models such as deep learning neural networks. Therefore, there is an urgent need for automatic methods to discover optimal hyperparameters for higher accuracy and efficiency of prediction models. In this study, a novel investigation is contributed to the field of wind power forecasting by a comprehensive comparison of three advanced techniques – Scikit-opt, Optuna, and Hyperopt – for hyperparameter optimization of Convolutional Neural Network (CNN) and Long Short-Term Memory Network (LSTM) models, a facet that, to our knowledge, has not been systematically explored in existing literature. The impact of these optimization techniques on the accuracy and efficiency of the CNN and LSTM models are assessed by comparing the root mean square error (RMSE) of the predictions and the required time to tune the models. The results show that the Optuna algorithm, using a Tree-structured Parzen Estimator (TPE) search method and Expected Improvement (EI) acquisition function, has the best efficiency for both CNN and LSTM models. In terms of accuracy, it is demonstrated that while for the CNN model all the optimization methods achieve similar performances, the LSTM model optimized by the Hyperopt algorithm, based on the annealing search method, results in the highest accuracy. In addition, for the first time in this research, the impact of the random initialization features on the performance of the forecasting models with neural networks is investigated. The proposed structures for deep learning models were examined to determine the most robust structure with the minimal sensitivity to the randomness. What we have discovered from the comparison of advanced hyperparameter optimization methods can be used by researchers to tune the time series-based forecasting models.

Accurate short-term wind power forecasting has a significant impact to economic dispatch, which ensures the efficiency and smooth operation of power system. In this paper, a hybrid wind power forecasting method based on a typical algorithm of feedforward neural network, convolutional neural network (CNN) and a time circulation neural network, and long short-term memory network (LSTM) models is proposed. It aims to improve the accuracy of ultra-short-term wind power forecasting.

The rapid expansion of wind power gives rise to a number of challenges for power system operators and electricity market participants. The key operational challenge is to efficiently handle the uncertainty and variability of wind power when balancing supply and demand in ths system. In this report, we analyze how wind power forecasting can serve as an efficient tool toward this end. We discuss the current status of wind power forecasting in U.S. electricity markets and develop several methodologies and modeling tools for the use of wind power forecasting in operational decisions, from the perspectives of the system operator as well as the wind power producer. In particular, we focus on the use of probabilistic forecasts in operational decisions. Driven by increasing prices for fossil fuels and concerns about greenhouse gas (GHG) emissions, wind power, as a renewable and clean source of energy, is rapidly being introduced into the existing electricity supply portfolio in many parts of the world. The U.S. Department of Energy (DOE) has analyzed a scenario in which wind power meets 20% of the U.S. electricity demand by 2030, which means that the U.S. wind power capacity would have to reach more than 300 gigawatts (GW). The European Union is pursuing a target of 20/20/20, which aims to reduce greenhouse gas (GHG) emissions by 20%, increase the amount of renewable energy to 20% of the energy supply, and improve energy efficiency by 20% by 2020 as compared to 1990. Meanwhile, China is the leading country in terms of installed wind capacity, and had 45 GW of installed wind power capacity out of about 200 GW on a global level at the end of 2010. The rapid increase in the penetration of wind power into power systems introduces more variability and uncertainty in the electricity generation portfolio, and these factors are the key challenges when it comes to integrating wind power into the electric power grid. Wind power forecasting (WPF) is an important tool to help efficiently address this challenge, and significant efforts have been invested in developing more accurate wind power forecasts. In this report, we document our work on the use of wind power forecasting in operational decisions.

With the rising demand for environmental protection, wind energy has made considerable progress as a clean energy source. Due to the uncertainty of wind power generation, accurate forecasting of wind power is conducive to achieving stable grid-connected control of wind turbines. This paper proposes an ultra-short-term wind power forecasting model composed of variational modal decomposition (VMD) and long short-term memory (LSTM) networks. Obtain the recorded historical wind speed and historical power from the wind field data acquisition and monitoring control system (SCADA), and use VMD to decompose and reconstruct the historical wind speed of the wind field to form 5 training data sets. Using historical power, historical wind speed, and predicted wind speed as input, wind power forecasts for the next 4 hours (15 minutes apart) are made. In order to evaluate the prediction ability of the proposed model, two algorithms, LSTM and XGBoost, are used for prediction. Taking root mean square error (RMSE) and mean absolute error (MAE) as evaluation indicators, the results show that the prediction accuracy of wind power is significantly improved after VMD processing, and the performance of LSTM is better than XGBoost in the two evaluation indicators.

Using enhanced crow search algorithm optimization-extreme learning machine model to forecast short-term wind power

In order to improve the accuracy of wind power forecasting, a wind power time series forecasting model based on Prophet al-gorithm is established. The wind power data of a region from 2018 to 2020 are used for forecasting, and compared with the long short- term memory neural network forecasting model to explore the feasibility of the model in wind power forecasting.

Reliable wind power forecasting is essential for maintaining the safe and stable operation of power systems with high renewable energy penetration. This study proposes a short-term wind power forecasting model based on decomposition–optimization–prediction, integrating complementary ensemble empirical mode decomposition with adaptive noise (CEEMDAN), the improved football team training algorithm (IFTTA), and the bidirectional long short-term memory network model (BiLSTM). CEEMDAN is employed to decompose the non-stationary wind power sequence into relatively stable intrinsic mode functions (IMFs), thereby separating multi-scale fluctuation features. The IFTTA incorporates a dynamic probability allocation strategy and an adaptive parameter adjustment mechanism, which contributes to a better balance between global exploration and local exploitation. After optimizing the hyperparameters of BiLSTM using IFTTA, the prediction performance significantly improved. Validations were conducted on three datasets from Xinjiang, Ningxia, and Inner Mongolia, China, each containing 1440 samples (1152 for training and 288 for testing). Comparisons with the benchmark forecasting model demonstrate that the pro-posed model reduces the mean absolute error (MAE), mean absolute percentage error (MAPE), and root mean square error (RMSE) by at least 25.29%, 29.62%, and 20.66%, respectively. Correspondingly, the coefficient of determination (R2) was improved by at least 0.0069. This model provides an effective solution for short-term wind power prediction in practical engineering.