A DEEP LEARNING MODEL IMPLEMENTATION BASED ON RSSI FINGERPRINTING FOR LORA-BASED INDOOR LOCALIZATION

Received signal strength (RSS) fingerprint-based indoor localization has received increasing popularity over the past decades. However, it suffers from the high calibration effort for fingerprint collection. In this paper, a Centralized indooR localizatioN method using Pseudo-label (CRNP) is proposed, which employs a small set of labeled data (RSS fingerprint) along with large volumes of unlabeled data (RSS values without coordinates) to reduce the workload of labeled data collection and improve the indoor localization performance. However, the rich location data is large in quantity and privacy sensitive, which may lead to high network cost (i.e., data transmission cost, data storage cost) and potential privacy leakage for data transmission to the central server. Therefore, a decentralized indoor localization method incorporating CRNP and federated learning is devised, which keeps the location data on local users' devices and improves the shared CRNP model by aggregating users' updates of the model. The experiment results demonstrate that (i) the proposed CRNP enables to improve the indoor localization accuracy by using unlabeled crowdsourced data; (ii) the designed decentralized scheme is robust to different data distribution and is capable to reduce the network cost and prevent users' privacy leakage.

Received signal strength (RSS) measurements are easily available and provide context information to IoT-devices. However, indoor localization via RSS is error prone. Due to walls and ceilings multipath propagation occurs and leads to constructive and destructive interference and therefore higher or lower RSS values in an unpredictable and therefore random fashion. This random variation decreases localization accuracy if not considered right. In our work, we develop a pathloss model via a ray tracing engine and rate several measured RSS values by statistical means. We find a good estimate of the RSS of the line of sight connection which improves the distance estimation significantly. Our algorithm is based on the assumption that several frequencies are used for localization, which is true for Bluetooth Low Energy (BLE). We demonstrate the improved RSS-based-localization by real experiments and BLE hardware.

In this paper, we propose an indoor positioning system based on Bluetooth low energy (BLE), and the localization tag is with characteristics of low power, low cost, and high portability. The proposed system consists of BLE tags, BLE/WiFi repeaters, and a fusion server. The BLE tag is a device which broadcasts BLE beacons. The BLE/WiFi repeaters collect the beacons transmitted from the tag and extract the received signal strength (RSS). The RSS values are then transmitted to the fusion server through WiFi, and the server will estimate the position of the BLE tag with RSS-based positioning algorithm. We propose an indoor positioning algorithm which is a hybrid from received signal strength indication (RSSI)-fingerprint and cell of origin (CoO) to estimate the BLE tag's location. Some modifications are made to typical RSSI-fingerprint and CoO algorithm to get better accuracy. The test results show 1.2 m to 1.4 m positioning accuracy. The size of the BLE tag is 1.7 cm in radius and 0.5 cm thick. Each BLE tag costs 3 US dollars. The current consumption of the tag is 50 μA which can be used without charge for 136 days with a CR2025 battery.

Indoor localization schemes have significant potential for use in location-based services in areas such as smart factories, mixed reality, and indoor navigation. In particular, received signal strength (RSS)-based fingerprinting is used widely, given its simplicity and low hardware requirements. However, most studies tend to focus on estimating the 2D position of the target. Moreover, it is known that the fingerprinting scheme is computationally costly, and its positioning accuracy is readily affected by random fluctuations in the RSS values caused by fading and the multipath effect. We propose an indoor 3D localization scheme based on both fingerprinting and a 1D convolutional neural network (CNN). Instead of using the conventional fingerprint matching method, we transform the 3D positioning problem into a classification problem and use the 1D CNN model with the RSS time-series data from Bluetooth low-energy beacons for classification. By using the 1D CNN with the time-series data from multiple beacons, the inherent drawback of RSS-based fingerprinting, namely, its susceptibility to noise and randomness, is overcome, resulting in enhanced positioning accuracy. To evaluate the proposed scheme, we developed a 3D positioning system and performed comprehensive tests, whose results confirmed that the scheme significantly outperforms the conventional common spatial pattern classification algorithm.

Context-aware applications have been gaining huge interest in the last few years. With cell phones becoming ubiquitous computing devices, cell phone localization has become an important research problem. Database Correlation Method (DCM) is a positioning technology that based on a database of a premeasured location dependent variable such as Received Signal Strength (RSS). DCM has shown superior in terms of accuracy. Absolute RSS values received from a base station change with time, but the relative RSS (RRSS) values which refer to the relations of the RSS values between different base stations are more stable. This study proposes and implements a robust RRSS GSM-based technique for both positioning and traffic estimation. The study was tested and analyzed in Egypt roads using realistic data and Android smart phones. The performance evaluation showed good results. Mean positioning accuracy was about 29m in urban areas and velocity estimation was about 1 km/h in rural areas.

With growing technology, Location Based Services (LBSs) are becoming a vital part of life. The rapid development of mobile internet has offered an opportunity for Wi-Fi indoor positioning to come under the spotlight due to its low cost. Here, indoor positioning is performed using Wi-Fi. The earlier solutions like GPS does not provide efficient positioning in indoor environment due to weak signal reception which makes Wi-Fi more reliable. However, nowadays the accuracy of the traditional indoor positioning algorithms like trilateration cannot meet the practical requirement. This paper proposes the performance analysis of indoor positioning algorithms using Wi-Fi technology based on Received Signal Strength (RSS) from the access points in the network. The positioning algorithms are based on location fingerprinting consisting of two stages: The offline database creation and the online positioning. The RSS values obtained by the mobile device at reference points are sent to the server where all the location fingerprints of all reference points are stored in a database. Coordinates of user position are calculated using positioning algorithms and the position is displayed in terms of 2Dcoordinates of the room and indoor map. Basic Fingerprint algorithm, RSS Fingerprint with minimum Euclidean Distance algorithm and RSS Fingerprint with Euclidean Distance and k-nearest neighbors' algorithm were implemented. Moreover comparison of their performance was carried out in terms of accuracy of position. From the result, it is found that an average accuracy of 0.4962 meters was achieved by RSS Fingerprint with minimum Euclidean distance algorithm.

As a low‐cost distance measurement method, received signal strength (RSS) is often used for indoor wireless sensor localisation. However, RSS values can be easily influenced by multi‐path fading, noise and other environmental parameters. This decreases the accuracy and stability of estimated distance. To improve localisation accuracy, this study proposes a multiplicative distance‐correction factor (MDCF) to counteract the inaccuracy of estimated distance. In the same indoor environment, the product of this CF and estimated distance is regarded as a good approximation of real distance between unknown node and an anchor node. Then, two location estimated methods based on MDCF (MDCF‐grid and MDCF‐particle swarm optimisation) are proposed. The experimental results confirm that the proposed location estimation methods can significantly improve localisation accuracy without extra hardware in practical indoor scenarios.

The Internet of Things (IoT) is an emerging paradigm to integrate the physical world into cyber systems by connecting various devices, which sense and control the surrounding objects. For the upcoming IoT era, narrow-band signals will play an important role in the exchange of sensor data and control signals in IoT networks. Indoor positioning is critical for many IoT applications, such as asset tracking, smart buildings, smart e-health, and smart cities, but it is very challenging to achieve accurate indoor positioning with narrowband signals because of multipath propagation. In this paper, we design a positioning system using narrowband signals, particularly ZigBee signals, based on an enhanced fingerprinting algorithm by fusing received signal strength (RSS) and time information. We first investigate the feasibility of time-based fingerprinting by handling the challenges as synchronization compensation among anchor nodes and design of sub-sample timestamps with a resolution of nanoseconds. Second, we design a feature-based fusion approach to fuse and standardize time and RSS fingerprints. Third, we adopt a random forest regression model to design an enhanced pattern matching algorithm for fingerprinting. We implement the proposed algorithms with software-defined radio techniques. In the given experiment results, we find that the positioning system achieves a mean positioning accuracy of 1.61 m, which represents a 36.1% improvement over traditional RSS-based fingerprinting.

Context-aware applications have been gaining huge interest in the last few years. With cell phones becoming ubiquitous computing devices, cell phone localization has become an important research problem, and numerous localization solutions have been proposed. Database Correlation Method (DCM) is a positioning technology that based on a premeasured database of a location dependent variable such as Received Signal Strength (RSS) or Link Quality Identifier. DCM has shown superior in terms of accuracy. Absolute RSS values received from base station change with time, but the relative RSS values which refer to the relations of the RSS values between different base stations are more stable. This study has proposed and implemented a robust technique for both positioning and traffic estimation using Relative Received Signal Strength (RRSS) of GSM. The study has been tested and analysed in Egypt roads using realistic data and Android smart phones. The performance evaluation showed good results. Mean positioning accuracy was about 29 m in urban areas and velocity estimation was about 1 km/h in rural areas.

Indoor localization of mobile nodes is emerging as a promising field in the past decades due to the advances in mobile devices and the increasing number of wireless services and applications. Wi-Fi fingerprints which is a vector of Received Signal Strength (RSS) values in a specific location are considered a good feature for indoor localization due to their simplicity. However, the existing methods such as decision tree (DT) and Naïve Bayes (NB) techniques have some drawbacks. DT has low efficiency because it uses the Boolean function, and NB provides a low accuracy of prediction for the sparse dataset. In this research, fingerprint referencing with two important methods, Support Vector Machine (SVM) and Long-Short Term Memory (LSTM) machine learning algorithms, are used to enable accurate indoor localization. Furthermore, data normalization is implemented to reduce positioning error by increasing the inconsistency of the RSS values. Further, several experiments have been conducted by using three mobile devices in the area of 280 m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> to create our dataset by taking 480 RSS records for both training and testing phases. The results show that the accuracy LSTM algorithm is 0.9 m, whereas the SVM algorithm accuracy is 1.1 m. Both experimental results show better accuracy for indoor environments can be achieved by the proposed approach than results recorded by several prior studies.

RSS Based Energy Efficient Scheme for the Reduction of Overhearing and Rebroadcast for MANET

Crowdsensing is more and more used nowadays for indoor localization based on Received Signal Strength (RSS) fingerprinting. It is a fast and efficient solution to maintain fingerprinting databases and to keep them up-to-date. There are however several challenges involved in crowdsensing RSS fingerprinting data, and these have been little investigated so far in the current literature. Our goal is to analyse the impact of various error sources in the crowdsensing process for the purpose of indoor localization. We rely our findings on a heavy measurement campaign involving 21 measurement devices and more than 6800 fingerprints. We show that crowdsensed databases are more robust to erroneous RSS reports than to malicious fingerprint position reports. We also evaluate the positioning accuracy achievable with crowdsensed databases in the absence of any available calibration.

The computational capabilities of off-the-shelf wireless sensors networks presents a limitation when more complex forms of localization algorithms are employed for location estimation purposes, particularly in an indoor environment. Range-free algorithms rely on Received Signal Strength (RSS) from sensors that are location aware (anchor nodes) as the major means of distance estimation. This paper presents a non-site specific algorithm for better estimating RSS relationship with distance. By employing a unique form of rationalization of raw RSS with respect to distance using the proposed algorithm, it is possible to enhance the reliability of RSS when employed in indoor Localization Algorithms. Consequently, this paper presents an innovative RSS-Distance rationalization algorithm for localization of objects in an indoor environment. The paper compared the proposed algorithm with Simple Moving Average (SMA) algorithm due to the wide applicability and ease of manipulation of SMA. The analysis of the proposed algorithm and SMA shows that the proposed algorithm better modifies RSS for more accurate position estimation in an indoor environment.

Wi-Fi-based indoor positioning systems are becoming increasingly prevalent in digital transitions; therefore, ensuring accurate and robust positioning is essential to supporting the growth in demand for smartphones’ location-based services. The indoor positioning system on a smartphone, which is generally based on Wi-Fi received signal strength (RSS) measurements or the fingerprinting comparison technique, uses the K-NN algorithm to estimate the position due to its high accuracy. The fingerprinting algorithm is popular due to its ease of implementation and its ability to produce the desired accuracy. However, in a practical environment, the Wi-Fi signal strength-based positioning system is highly influenced by external factors such as changes in the environment, human interventions, obstacles in the signal path, signal inconsistency, signal loss due to the barriers, the non-line of sight (NLOS) during signal propagation, and the high level of fluctuations in the RSS, which affects location accuracy. In this paper, we propose a method that combines pedestrian dead reckoning (PDR) and Wi-Fi fingerprinting to select a k-node to participate in the K-NN algorithm for fingerprinting-based IPSs. The selected K-node is used for the K-NN algorithm to improve the robustness and overall accuracy. The proposed hybrid method can overcome practical environmental issues and reduces the KNN algorithm’s complexity by selecting the nearest neighbors’ search space for comparison using the PDR position estimate as the reference position. Our approach provides a sustainable solution for indoor positioning systems, reducing energy consumption and improving the overall environmental impact. The proposed method has potential applications in various domains, such as smart buildings, healthcare, and retail. The proposed method outperforms the traditional KNN algorithm in our experimental condition since its average position error is less than 1.2 m, and provides better accuracy.

With the WiFi becoming more and more popular over the last few years, the study on the technology of indoor positioning based on WiFi is given more and more attention. Being specific to the problem that not all the clustered reference points(RPs) of the traditional clustering algorithm have geometric proximity in indoor positioning, this paper puts forward the affinity propagation presentation(AP) which bases on the combination of geometry and received signal strength (RSS). Being different from the traditional clustering algorithm, this kind of algorithm can endow the RPs with geometrical and endow the RSS with corresponding weight according to the positioning conditions, it can use the features of the geometry and RSS to restrain the sort of RPs, and that can make the sort of RPs more reasonable. After that it will use k-Nearest Neighbor Algorithm(KNN) to have accurate positioning, which not only can reduce the calculation, but also improve the localization accuracy. Simulation shows that, this kind of algorithm possesses the advantage of fast location and higher localization accuracy.