A dynamic multiobjective hybrid approach for designing Wireless Sensor Networks

The increasing in the demand for Wireless Sensor Networks (WSNs) has intensified studies which are dedicated to obtain more energy-efficient solutions, since the energy storage limitation is critical in those systems. Additionally, there are other aspects which usually must be ensured in order to get an acceptable performance of WSNs, such as area coverage and network connectivity. This paper proposes a procedure for enhancing the performance of WSNs: a multiobjective hybrid optimization algorithm is employed for solving the Dynamic Coverage and Connectivity Problem (DCCP) in flat WSNs subjected to node failures. This method combines a multiobjective global on-demand algorithm (MGoDA), which improves the current DCCP solution using a Genetic Algorithm, with a local on line algorithm (LoA), which is intended to restore the network coverage soon after any failure. The proposed approach is compared with an Integer Linear Programming (ILP)-based approach and a similar mono-objective approach with regard to coverage, network lifetime and required running time for achieving the optimal solution provided by each method. Results achieved for a test instance show that the hybrid approach presented can improve the performance of the WSN obtaining good solutions with a considerably smaller computational time than ILP. The multiobjective approach still provides a feasible method for extending WSNs lifetime with slight decreasing in the network mean coverage.

Finding an optimal node deployment strategy in wireless sensor networks (WSNs) that would reduce cost, be robust to node failures, reduce computation, and communication overhead, and guarantee a high level of coverage along with network connectivity is a difficult problem. In fact, sensing coverage and network connectivity are two of the most fundamental problems in WSNs as they can directly impact the network lifetime and operation. In this paper, we consider deriving optimal conditions for connectivity with coverage in WSNs. Most versions of this problem are (NP-complete), while approximation algorithms cannot be developed for some versions of polynomial time, unless P = NP. Hence, we also develop a heuristic for some versions of the problem and the efficacy of the heuristic will be evaluated through extensive simulations. We are also interested in determining the probability of finding a path between a given pair of nodes over a given topology of WSNs. This will serve as a measure of connectivity with coverage of the network. Hence, we derive necessary and sufficient conditions for connectivity with coverage over a clustered structure in WSNs. Then, employing queuing networks modeling techniques, we present a dynamic programming study of the connectivity with coverage of clustered structure and its effect on routing in generalized WSNs. The performance evaluation of the proposed schemes shows that availability of nodes, sensor node coverage, and the connectivity were sufficiently enhanced to maximize network lifetime.

Efficient coverage and connectivity are two important factors that ensures better service quality especially during tracking targets or monitoring events in wireless sensor network. Although massive amount of studies has been carried out in the past to enhance coverage and connectivity issues, till date very few studies have witnessed a significant and standard outcomes that can opt further. Hence, this paper introduces a computationally efficient technique for jointly addressing both coverage and connectivity problems in large-scale wireless sensor network that ensures optimal network lifetime too. The proposed system has been empirically designed, and algorithms formulated to ensure energy efficient monitoring of event. The outcomes of the study are compared with standard energy efficient hierarchical protocol to benchmark the results.

Target Coverage and Network Connectivity in Wireless Sensor Networks (WSNs) plays a momentous role in the field of monitoring environment, habitant observing, disaster recovery, surveillance, etc. Coverage and Network Connectivity collectively can be considered as a proportion of Quality of Service (QoS) in a sensor network. It implies the coverage of each point in the detecting field while in the meantime fulfilling the measure that each node is surrounded by the equivalent neighbourhood of at least one other node. Many primary issues influence the outline and performance of WSN. A Comprehensive survey is made based on the scheduling algorithm and set cover approach, in which we analyze various approaches and their algorithm complexity. Firstly, the scheduling algorithm intermittently provides the required data service with guaranteed efficiency. This methodology can efficiently reduce the entire number of active nodes in the network, resulting in maximizing the network lifetime. Secondly, the set cover approach plays a major role in solving target coverage problem which group sensors into each cover set thereby, target coverage was achieved. Typical issues and open research challenges are addressed by classifying the approaches available in literature into three broad categories namely, adaptable coverage radius, coverage deployment strategy, and sleep scheduling. This survey aims to provide a better perceptive of the existing open challenges and possible futuristic approaches for target coverage and network connectivity in wireless sensor networks.

Recent improvements in affordable and efficient integrated electronic devices have a considerable impact on advancing the state of wireless sensor networks, which constitute the platform of a broad range of applications related to national security, surveillance, military, health care, and environmental monitoring. An important problem receiving increased consideration recently is the sensor coverage problem, centered around a fundamental question: How well do the sensors observe the physical space? The coverage concept is subject to a wide range of interpretations due to a variety of sensors and applications. Different coverage formulations have been proposed, based on the subject to be covered (area versus discrete points), sensor deployment mechanism (random versus deterministic) as well as other wireless sensor network properties (e.g. network connectivity and minimum energy consumption). In this article, we survey recent contributions addressing coverage problems in the context of static wireless sensor networks. We present various coverage formulations and their assumptions, as well as an overview of the solutions proposed.

Although most of the studies on coverage and connectivity in wireless sensor networks (WSNs) considered two-dimensional (2D) settings, such networks can in reality be accurately modeled in a three-dimensional (3D) space. The concepts of continuum percolation theory best fit the problem of connectivity in WSNs to find out whether the network provides long-distance multihop communication. In this paper, we focus on percolation in coverage and connectivity in 3D WSNs. We say that the network exhibits a coverage percolation (respectively, connectivity percolation) when a giant covered region (respectively, giant connected component) almost surely spans the entire network for the first time. Because of the dependency between coverage and connectivity, the problem is not only a continuum percolation problem but also an integrated continuum percolation problem. Thus, we propose an integrated-concentric-sphere model to address coverage and connectivity in 3D WSNs in an integrated way. First, we compute the critical density lambdaC con above which coverage percolation in 3D WSNs will almost surely occur. Second, we compute the critical density lambdac con above which connectivity percolation in 3D WSNs will almost surely occur. Third, we compute the critical density lambdac cov-con above which both coverage and connectivity percolation in 3D WSNs will almost surely occur. For each of these three problems, we also compute their corresponding critical network degree. Our results can be helpful in the design of energy-efficient topology control protocols for 3D WSNs in terms of coverage and connectivity.

In this paper, we are concerned with energy efficient area monitoring using information coverage in wireless sensor networks, where collaboration among multiple sensors can enable accurate sensing of a point in a given area-to-monitor even if that point falls outside the physical coverage of all the sensors. We refer to any set of sensors that can collectively sense all points in the entire area-to-monitor as a full area information cover. We first propose a low-complexity heuristic algorithm to obtain full area information covers. Using these covers, we then obtain the optimum schedule for activating the sensing activity of various sensors that maximizes the sensing lifetime. The scheduling of sensor activity using the optimum schedules obtained using the proposed algorithm is shown to achieve significantly longer sensing lifetimes compared to those achieved using physical coverage. Relaxing the full area coverage requirement to a partial area coverage (e.g., 95% of area coverage as adequate instead of 100% area coverage) further enhances the lifetime.

Wireless sensor networks (WSNs) include sensor nodes in which each node is able to monitor the physical area and send collected information to the base station for further analysis. The important key of WSNs is detection and coverage of target area which is provided by random deployment. This paper reviews and addresses various area detection and coverage problems in sensor network. This paper organizes many scenarios for applying sensor node movement for improving network coverage based on bioinspired evolutionary algorithm and explains the concern and objective of controlling sensor node coverage. We discuss area coverage and target detection model by evolutionary algorithm.

In this paper, we propose a hybrid approach for wireless sensor networks which can reduce the total energy consumption of network operation therefore improving network lifetime along with complete coverage of remote monitoring field. The proposed method named as Hybrid Weight based Coverage Enhancing Protocol (H-WCEP) helps to select appropriate cluster heads and their respective cluster members by using weighted sum method and subsequent routing path by genetic algorithm. The network lifetime and coverage lifetime are computed by implementing this approach to achieve continuously monitoring of remote monitoring areas. The results of H-WCEP outperform as compared to other existing protocols. The network lifetime and full coverage lifetime of H-WCEP increase by 48 percentage and 42 percentage approximately respectively.

Node placement for connected target coverage in wireless sensor networks with dynamic sinks

The activity scheduling of sensors to alternately wake up for sensing obligation such that the network lifetime can be efficiently prolonged is a very important issue in wireless sensor networks (WSNs). Target area coverage is a new coverage problem in wireless sensor networks. The paper addresses the target area coverage problem and schedules sensors to alternatively wake up to collaboratively cover and sense the target area. A geometric-based activity scheduling scheme, named GAS scheme, for WSNs to fully cover a target area is proposed. By means of computational geometry, the sensors can self-determine when to sleep or wake up while preserving the sensing coverage. GAS is able to find as few sensors as possible to cover the target area, which is termed a cover set. In addition, GAS can find as many number of cover sets as possible to be alternately in charge of the sensing task. Simulation results show that GAS can efficiently schedule the sensor when to switch between active and sleep modes. Furthermore, the network lifetime can be prolonged significantly in comparison with the state-of-the-art schemes.

The determination of the optimal feed profiles for a reactive crystallizer is an important dynamic optimization problem, as the feed profiles offer a significant control over the quality of the product crystals. Crystallization processes typically have multiple performance objectives and optimization using different objective functions leads to significantly different optimal operating conditions. Therefore, a multiobjective approach is more appropriate for optimization of these processes. The potential for multiobjective optimization approach is demonstrated for semibatch reactive crystallization processes. The multiobjective approach usually gives rise to a set of optimal solutions, largely known as Pareto‐optimal solutions. The Pareto‐optimal solutions can help the designer visualize the trade‐offs between different objectives, and select an appropriate operating condition for the process. A well known multiobjective evolutionary algorithm, the elitist nondominated sorting genetic algorithm, has been adapted to illustrate the potential for the multiobjective optimization approach. © 2007 American Institute of Chemical Engineers AIChE J, 2007

A multi-objective optimization-based computational approach to nondestructive evaluation of damage in structural components, and more generally in solid continua, is discussed and numerically evaluated. The multi-objective approach provides a substantial improvement in the capabilities to traverse the optimization search space to minimize the measurement error and produce accurate damage estimates. Through simulated test problems based on the characterization of damage in structural steel components, including internal pipe surface geometry as well as material loss within a plate structure utilizing steady-state dynamic measurements of outer surface displacement, a multi-objective genetic algorithm optimization approach is shown to provide substantial computational improvement over single-objective strategies. The multi-objective approach consistently and efficiently produces more accurate characterization results in contrast to equivalent single-objective strategies. More importantly, the multi-objective approach is shown to exhibit consistently better tolerance to test measurement noise and measurement sparsity. Moreover, the multi-objective strategy was found to provide improved diversity in the solution estimates for ill-posed problems, which is an important step leading to insight into the necessary changes to the testing or parameterization to subsequently produce more accurate and unique solutions to such inverse characterization problems.

As the Internet of Things (IoT) evolves, more and more Wireless Sensor Networks (WSNs) are being deployed in the real world. Connected vehicles, smart grids, smart cities, smart healthcare, networks of robots, and disaster recovery networks are some examples. In WSNs, the area coverage is one of the most important quality of service metrics. A WSN without enough area coverage yields incorrect results. So calculating the covered area of a WSN is mandatory. Previous studies have used a simple approach: all nodes send their location to the sink, and it calculates the covered area centrally which makes huge unnecessary communication overhead. In our previous work titled Distributed Exact Coverage Rate Calculation, we calculated the covered area of a homogenous WSN in a distributed manner. In this paper, we provide a Heterogeneous Distributed Precise Coverage Rate (HDPCR) mechanism that calculates the covered area of a Heterogeneous Wireless Sensor Network by using a localized mechanism. With the use of boundary detection mechanisms, the HDPCR detects the boundary of the network and calculates its area. HDPCR also detects holes and calculates their area precisely. By subtracting these two calculated values, the covered area of the network can be computed. Many related studies have evaluated the coverage rate approximately with error and require more calculations to reduce the error rate. HDPCR calculates the coverage rate precisely without an error rate using simple arithmetic calculations. The exhaustive simulation also shows the superiority of HDPCR as compared to the previous approaches.

Toward the end of the 20th century, the Internet has been able to provide a large number of users with the ability to move diverse forms of information readily and thus has revolutionized business, industry, defense, science, education, research, and human interactions. In the last 10 years, sensor networking combines the technology of modern microelectronic sensors, embedded computational processing systems, and modern computer networking methodology. It is believed that sensor networking in the 21st century will be equally significant by providing measurement of the spatial-temporal physical phenomena around us, leading to a better understanding and utilization of this information in a wide range of applications. Sensor networking will be able to bring a finer-grained and fuller measurement and characterization of the world around us to be processed and communicated, so the decision makers can utilize the information to take actions in near-real-time. The potential applications enabled by SNs include security and surveillance, environmental monitoring and control, target detection and tracking, etc. Wireless sensor networks utilize the extensive networking concepts of ad hoc networks and apply them to specific sensor network scenarios. This mini-special issue comprises three papers covering three quiet diverse aspects of wireless sensor networks. The first paper, “Lifetime Maximization Based on Coverage and Connectivity in Wireless Sensor Networks,” is by T. Zhao et al. They studied the problem of network lifetime maximization for QoS specific information retrieval for the reconstruction of a spatially correlated signal field in a wireless sensor network for two wireless transmission cases. In one case, they assumed there exist single-hop transmissions between sensors and the access point, and in the other case, the measurements are sent to the access point through multi-hop transmissions. To address both of these problems, they formulated the problems using integer programming based on the theories of coverage and connectivity in sensor networks and then derived upper bounds for the network lifetime that provides benchmarks for the performance of suboptimal methods. Several lowcomplexity suboptimal algorithms for joint node scheduling and data routing were then proposed to approach the performance upper bounds. The second paper, “Using Heterogeneity to Enhance Random Walk-based Queries,” is by M. Zuniga et al. They presented a study of the impact of heterogeneous node connectivity on random walk-based queries. The main contribution of the work is showing that with a small percentage (e.g., 10%) of high-degree nodes in the network and using a simple distributed push-pull mechanism, significant cost savings can be obtained (e.g., between 30% and 70%) depending on the coverage of the high-degree nodes. Their work provides interesting theoretical results for line topologies showing that when cluster-heads have a coverage of k nodes to the right and left and are uniformly distributed, a fraction of 4/5k J Sign Process Syst (2009) 57:381–383 DOI 10.1007/s11265-009-0377-9