A Kalman-Filtering Approach to High Dynamic Range Imaging for Measurement Applications

Technique of high dynamic range imaging (HDRI) was introduced into conventional high dynamic range display (HDRD). Sharpness of image was further enhanced by improving local contrast ratio in the HDRI-based high dynamic range display.

Perceptual brightness-based inverse tone mapping for high dynamic range imaging

Recently, visual representations using high dynamic range (HDR) images become increasingly popular, with advancement of technologies for increasing the dynamic range of image. HDR image is expected to be used in wide-ranging applications such as digital cinema, digital photography and next generation broadcast, because of its high quality and its powerful expression ability. HDR imaging technologies will spread its sphere of influence in imaging industry. In this paper, we review the state-of-the-art studies and the trends of the HDR imaging, in terms of the following three points: (1) HDR imaging sensor and HDR image generation techniques as image acquisition technologies, (2) encode method of HDR images for efficient transmission and storage, (3) human visual system issues associated with reproduction of HDR image.

Scenes in real world have dynamic range of radiation that cannot be captured by conventional cameras. High dynamic range imaging is a technique to capture detail images where, in the field of image, intensity variation is extreme. This technique is very useful for biological imaging where the samples have very bright and very dark regions and both parts have useful information. In this article we propose a novel high dynamic range imaging technique based on compressive imaging that uses one single detector instead of camera (array of detectors) to capture an image. Combination of high dynamic range imaging and compressive imaging benefits from imaging with high dynamic range of radiation and advantages of compressive sampling; namely, imaging at regions of optical spectrum where conventional cameras are not readily available and single detectors are available. Additionally, as its name suggests, this technique requires less number of samples (compared to raster scanning). Our experimental results show that high dynamic range compressive imaging system is capable of capturing images with large intensity contrast.

Significance:While shortwave infrared (SWIR) imaging provides superior tissue penetration and reduced autofluorescence for preclinical applications, quantitative fluorescence analysis is hindered by the limited dynamic range of InGaAs cameras, forcing a focus on either bright or dim anatomical features.Aim:We develop a high dynamic range (HDR) imaging method specifically adapted for the high-noise characteristics of InGaAs detectors to enable quantitative fluorescence imaging across wide intensity ranges. We demonstrate that one-time camera calibration based on a series of images encompassing the range of radiance intensities enables all subsequent image processing.Approach:We modified classical HDR algorithms with exposure-time-dependent dark current subtraction, preprocessing to exclude saturated and noisy pixels before camera response function recovery, and dynamic weighting range adjustment to account for shrinking intensity ranges at longer exposures. HDR image processing effects on preclinical imaging outcomes were analyzed using indocyanine green and SWIR-emitting PbS/CdS quantum dots in mouse models.Results:HDR imaging achieved a 22 dB improvement in dynamic range over single exposures, enabling simultaneous quantification across more than three orders of magnitude of fluorophore concentration. In vivo studies showed improvements in contrast-to-noise ratios across all anatomical features, with improvements in vascular contrast while maintaining quantitative accuracy. After one-time camera calibrations, this approach enables rapid processing of subsequent datasets.Conclusions:This software-based HDR SWIR imaging approach eliminates exposure parameter optimization and enables comprehensive biodistribution analysis across all anatomical structures from a single acquisition sequence, significantly streamlining preclinical imaging workflows while preserving quantitative accuracy.

Typical digital cameras exhibit a limitation regarding the dynamic range of the scene radiance they can capture. High Dynamic Range (HDR) imaging refers to methods and systems that aim to generate images that exhibit higher dynamic range between the lightest and the darkest parts of the an image. A typical approach for generating HDR images is exposure bracketing where multiple frames, each one with a different exposure setting, are captured and combined to a HDR image of the scene. The large number of images that exposure bracketing requires often leads to motion artefacts that limit the visual quality of the resulting HDR image. In this work, we propose a novel approach in HDR imaging that significantly reduces the necessary number of images. In our proposed system, we employ the notion of random exposure where each pixel of a single frame collects light for a random amount of time. By collecting a small number of such images, the full sequence of low dynamic range images can be reconstructed and subsequently used for HDR generation. The problem is solved by casting the reconstruction of the sequence as a nuclear norm minimization problem following the premises of the recently proposed theory of Matrix Completion. Experimental results suggest that the proposed method is able to reconstruct the sequence from as low as 20% of the images that traditional techniques require with minimal reduction in image quality.

Feature Point (FP) detection is a fundamental step in computer vision tasks. Although FP detectors are mostly designed to support Low Dynamic Range (LDR) images as input, interest in High Dynamic Range (HDR) images has increased recently due to their higher precision to register overexposed and underexposed areas in an image. As the detection of FPs is strongly dependent on the illumination of the scene, HDR images have the potential to be more robust than LDR images during FP detection. Known FP detectors, however, do not use the full potential of HDR images. In addition, few works have evaluated the performance of HDR images in this context. In this paper, we propose a modification of FP detectors aiming to improve FP detection on HDR images. To this end, we design a local mask based on the Coefficient of Variation (CV) of sets of pixels, creating thus a new step in FP detection. We compare our approach with popular FP detection methods using a standard evaluation metric, Repeatability Rate (RR) of FPs, and also Uniformity as a proposed new criterion. A dataset of images from scenes affected by camera transformations and substantial illumination changes was used as input. Experimental results show that our proposed algorithms give better Uniformity and RR in most HDR images from the dataset when compared to standard FP detectors. Moreover, they indicate that HDR images present a great potential to be explored in applications that rely on FP detection.

High dynamic range (HDR) images are becoming pervasive due to capturing or rendering of a wider range of luminance, but their special display equipment is difficult to be popularized because of high cost and technological problem. Thus, HDR images must be adapted to the conventional display devices by applying tone mapping (TM) operation, which puts forward higher requirements for intellectual property protection of HDR images. As the robustness presents regional diversity in the low dynamic range (LDR) watermarked image after TM, which is different from the traditional watermarking technologies, a concept of watermarking activity is defined and used to distinguish the essential distinction of watermarking between LDR image and HDR image in this paper. Then, a novel robust HDR image watermarking algorithm is proposed against TM operations. Firstly, based on the hybrid processing of redundant discrete wavelet transform and singular value decomposition, the watermark is embedded by modifying the structure information of the HDR image. Distinguished from LDR image watermarking, the high embedding strength can cause more obvious distortion in the high brightness regions of HDR image than the low brightness regions. Thus, a perceptual brightness mask with low complexity is designed to improve the imperceptibility further. Experimental results show that the proposed algorithm is robust to the existing TM operations, with taking into account the imperceptibility and embedded capacity, which is superior to the current state-of-art HDR image watermarking algorithms.

Recently, various deep learning-based high dynamic range (HDR) imaging methods have been proposed to overcome the performance limitation of simply merging or fusion of multiple low dynamic range (LDR) images. However, early deep learning-based methods did not fully exploit the inter-image relationship between different exposures. T o consider inter-image features without the dataset dependency, this paper presents a novel HDR method using three-dimensional residual dense network (3D RDN). We first reconstruct a set of differently exposed LDR images in video format. Next, we take the reconstructed video as an input to the 3D RDN, which generates an HDR image as output. Experimental results show that the proposed method provides higher score compared with state-of-the-arts HDR methods. To the best of authors knowledge, the proposed work first adopted the 3D RDN in the field of HDR imaging using more than three LDR images without any additional pre-or post-processing.

High dynamic range image deghosting by fast approximate background modelling

High dynamic range imaging techniques involve capturing and storing real world radiance values that span many orders of magnitude. However, common display devices can usually reproduce intensity ranges only up to two to three orders of magnitude. Therefore, in order to display a high dynamic range image on a low dynamic range screen, the dynamic range of the image needs to be compressed without losing details or introducing artefacts, and this process is called tone mapping. A good tone mapping operator must be able to produce a low dynamic range image that matches as much as possible the perception of the real world scene. We propose a two stage tone mapping approach, in which the first stage is a global method for range compression based on a gamma curve that equalizes the lightness histogram the best, and the second stage performs local contrast enhancement and color induction using neural activity models for the visual cortex. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

International audience

Tone-mapping-operators (TMOs) provide a useful means for converting high dynamic range (HDR) images to low dynamic range (LDR) images so that they can be viewed on standard displays, but this may influence the visual quality of experience (QoE) of the end-user. There is a need to understand the impact of TMOs to inform the choice of TMO algorithms for different displays, especially for small-screen-devices (SSDs) such as those used in mobile phones. This is important, as mobile devices are becoming the primary means of consuming multimedia contents. However, few studies have been undertaken to assess the impact of TMOs and viewing devices (especially SSDs) on the visual QoE of the user when using. In this chapter, we evaluate subjectively and objectively, the commonly used TMOs in different displays and resolutions for colour and grey-scale HDR images. Our results show that viewing devices have an influence on the TMOs performance, suggesting the need for a careful choice of TMO to enhance the viewing-QoE of the end-user. As expected, the higher resolution, the better HDR-image quality. Surprisingly, there was no significant difference between the Mean of Opinion Score (MOS) scores for colour and grey-scale images in SSDs. The device and TMOs affect QoE for colour and grey HDR-image equally. We found Shannon entropy (SE) to be a good objective measure of quality for colour and grey HDR images, suggesting that entropy may find use in automated HDR quality control assessment schemes, while; HDR-VDP-2 is a good objective measure for colour HDR image only.

High Dynamic Range (HDR) images capture the full range of luminance present in real world scenes, and unlike Low Dynamic Range (LDR) images, can simultaneously contain detailed information in the deepest of shadows and the brightest of light sources. In order to render HDR image on LDR displayers, it is often necessary to create LDR depictions of HDR images at the cost of contrast information loss. To reduce the loss, this paper enables to render HDRI (High Dynamic Range Image) with multiple low-bit images periodically. From the viewpoint of a human, the pixel value is fractural. It does not adjust the tones but can reconstruct HDR images.

The luminous value is high for many natural scenes, which causes loss of information and occurs in dark images. The High Dynamic Range (HDR) technique captures the same objects or scene for multiple times in different exposure and produces the images with proper illumination. This technique is used in the various applications such as medical imaging and observing the skylight, etc. HDR imaging techniques usually have the issue of lower efficiency due to capturing of multiple photos. In this paper, an efficient method is proposed for HDR imaging technique to achieve better performance and lower noise. The Luminance-Chrominance-Gradient High Dynamic Range (LCGHDR) method is proposed to obtain the proper luminous value of images. The same scenario is captured at different exposure are processed by the proposed method. Based on these feature values extracted from the different images and exposure fusion technique was developed that helps for the proper imaging. This experiment was evaluated and analyzed by comparing with the other methods, which showed the efficiency of the proposed method. This method needs only 124.594 seconds for the computation, while existing method need 139.869 seconds for the same number of images.