A Lightweight Vision-Based Measurement for Hand Gesture Information Acquisition

MuViH: Multi-View Hand gesture dataset and recognition pipeline for human–robot interaction in a collaborative robotic finishing platform

Hand gesture recognition has great applications in human-computer interaction (HCI), human-robot interaction (HRI), and supporting the deaf and mute. To build a hand gesture recognition model using deep learning (DL) with high results then needs to be trained on many data and in many different conditions and contexts. In this paper, we publish the TQU-HG dataset of large RGB images with low resolution (640×480) pixels, low light conditions, and fast speed (16 fps). TQU-HG dataset includes 60,000 images collected from 20 people (10 male, 10 female) with 15 gestures of both left and right hands. A comparative study with two branches: i) based on Mediapipe TML and ii) Based on convolutional neural networks (CNNs) (you only look once (YOLO); YOLOv5, YOLOv6, YOLOv7, YOLOv8, YOLO-Nas, single shot multiBox detector (SSD) VGG16, residual network (ResNet)18, ResNext50, ResNet152, ResNext50, MobileNet V3 small, and MobileNet V3 large), the architecture and operation of CNNs models are also introduced in detail. We especially fine-tune the model and evaluate it on TQU-HG and HaGRID datasets. The quantitative results of the training and testing are presented (F1-score of YOLOv8, YOLO-Nas, MobileNet V3 small, ResNet50 is 98.99%, 98.98%, 99.27%, 99.36%, respectively on the TQU-HG dataset and is 99.21%, 99.37%, 99.36%, 86.4%, 98.3%, respectively on the HaGRID dataset). The computation time of YOLOv8 is 6.19 fps on the CPU and 18.28 fps on the GPU.

The use of hand gestures provides a natural alternative to cumbersome interface devices for Human-Computer Interaction (HCI) systems. However, real-time recognition of dynamic micro hand gestures from video streams is challenging for in-vehicle scenarios since (i) the gestures should be performed naturally without distracting the driver, (ii) micro hand gestures occur within very short time intervals at spatially constrained areas, (iii) the performed gesture should be recognized only once, and (iv) the entire architecture should be designed lightweight as it will be deployed to an embedded system. In this work, we propose an HCI system for dynamic recognition of driver micro hand gestures, which can have a crucial impact in automotive sector especially for safety related issues. For this purpose, we initially collected a dataset named Driver Micro Hand Gestures (DriverMHG), which consists of RGB, depth and infrared modalities. The challenges for dynamic recognition of micro hand gestures have been addressed by proposing a lightweight convolutional neural network (CNN) based architecture which operates online efficiently with a sliding window approach. For the CNN model, several 3-dimensional resource efficient networks are applied and their performances are analyzed. Online recognition of gestures has been performed with 3D-MobileNetV2, which provided the best offline accuracy among the applied networks with similar computational complexities. The final architecture is deployed on a driver simulator operating in real-time. We make DriverMHG dataset and our source code publicly available 1.1https://www.mmk.ei.tum.de/DriverMHG/

Hand gestures are a form of non-verbal communication. Apart from traditional input devices, hand gestures are used for interaction with computers too. Communication via hand gestures finds many applications in the real world. Different people have hands with different shapes and orientations, which is termed as nonlinearity. The nonlinearity affects the performance of hand gesture models. A convolutional neural network (CNN) is an approach of neural networks, specifically known as deep learning. CNN is used to recognize and classify images. Sometimes, CNN could not correctly understand the hand gesture due to nonlinearity. Data augmentation helps CNN to understand the nonlinearity and complexity of images better. Data augmentation generates enormous data from lesser data, thus increasing the data adversity. Data augmentation uses various operations like zooming, rotating, shifting, shearing, and scaling to generate more data from the existing data. This article executes a CNN model using augmented data for recognition of static hand gestures. The dataset consists of 10 different hand gestures. The experimented CNN model has been trained using 10000 images and tested using 1000 images. The changes in the output of CNN with and without data augmentation have been highlighted. The CNN model employing data augmentation achieved an accuracy of 98.10%, whereas the CNN model excluding the data augmentation process attained an accuracy of 94.90% only.

Hand gesture recognition is an important area of research in the field of Human Computer Interaction (HCI). The geometric attributes of the hand play an important role in hand shape reconstruction and gesture recognition. That said, fingertips are one of the important attributes for the detection of hand gestures and can provide valuable information from hand images. Many methods are available in scientific literature for fingertips detection with an open hand but very poor results are available for fingertips detection when the hand is closed. This paper presents a new method for the detection of fingertips in a closed hand using the corner detection method and an advanced edge detection algorithm. It is important to note that the skin color segmentation methodology did not work for fingertips detection in a closed hand. Thus the proposed method applied Gabor filter techniques for the detection of edges and then applied the corner detection algorithm for the detection of fingertips through the edges. To check the accuracy of the method, this method was tested on a vast number of images taken with a webcam. The method resulted in a higher accuracy rate of detections from the images. The method was further implemented on video for testing its validity on real time image capturing. These closed hand fingertips detection would help in controlling an electro-mechanical robotic hand via hand gesture in a natural way.

The interaction between human and machine can be achieved by implementing human gesture applications which are known as human computer interaction (HCI). It has been developed several years ago, and now we can easily find it in many applications in real world e.g. in virtual reality, games, robotics, sign language recognition, etc. Gesture recognition has the potential to offer a natural way of communication between humans and machines. The most popular methods in human gesture application are hand gesture recognition. Several of hand gesture recognition methods still have the same problem when trying to recognize hand gesture accurately because of the existence of the uncontrolled environment problem, especially complex background. This study offered a method that can handle complex background in hand gesture recognition by analyzing pattern in spatio temporal domain. The system could reduce irregular noise in complex background significantly that affected to recognize the hand gesture. The experiment had been conducted using 180 videos with a total of 15 gestures. The result showed that the proposed method could recognize 15 hand gestures with accuracy of 98.33%.

In this paper, we investigate the optimal structure of deep convolutional neural networks for classifying human hand gestures using Doppler radar. When hand motions are captured by Doppler radar, the unique micro-Doppler signatures can be observed in the spectrogram. If the signature is distinguishable by a classifier, then the hand gesture can be used for controlling electronics and as an input modality for a human-computer interface. To classiiy signatures in the spectrogram, we propose the use of a deep convolutional neural network (DCNN) as a classifier. DCNN is a powerful classifier that extracts features as well as class boundaries through a training process. We measured seven hand gestures performed in front of Doppler radar while generating spectrograms. To identify an optimal structure, we trained several DCNNs by changing hyperparameters, such as the number of convolutional layers, the number of filters, and the filter size. The classification accuracy obtained from the optimal DCNN structure was approximately 87%.

Hand gesture recognition (HGR) has gained significant attention due to its potential for various applications. This paper explores the use of deep learning, specifically Convolutional Neural Networks (CNNs), for HGR using the TensorFlow library. We investigate existing research on CNN-based HGR, focusing on image classification tasks. We then provide a brief overview of CNNs and their suitability for image recognition. Subsequently, we describe the typical workflow of a deep learning-based HGR system, including data preprocessing, hand detection, feature extraction with CNNs, and classification. We highlight the advantages of using TensorFlow to build and train CNN models for HGR. Finally, we conclude by summarizing the key findings from related work and mentioning the specific dataset and number of gestures classified in our research. This work contributes to the growing body of research on CNN-based HGR using TensorFlow and emphasizes its potential for developing accurate and efficient HGR systems.

Hand Gesture Recognition (HGR) is most widely used in many applications to detect the hand movements of humans in front of the camera. HGR is the most innovative system that provides a user-friendly nature that can interact with a system that is known to humans. Applications such as machine interaction with humans, language signs, and analyzing the original hand gestures by the system is a very difficult task. HGR detection can be done based on the shapes of the four fingers and one thumb to recognize the hand and their respective location in the image. In this paper, a new HGR technique is introduced based on the shape metrics with the text-to-image conversion technique. For implementation, the Deep Convolution Neural Networks (DCNN) have been used with inception V3. The model considers the skin color and texture because the features of the image are specifically different conditions that are influenced. A webcam is used in the proposed system which is working on 20 fps with 7-megapixel intensity.

YOLO Based Breast Masses Detection and Classification in Full-Field Digital Mammograms

Reliability verification of a vision-based dynamic displacement measurement for system identification

Hand gesture for communication has proven effective for humans, and active research is ongoing in replicating the same success in computer vision systems. Human–computer interaction can be significantly improved from advances in systems that are capable of recognizing different hand gestures. In contrast to many earlier works, which consider the recognition of significantly differentiable hand gestures, and therefore often selecting a few gestures from the American Sign Language (ASL) for recognition, we propose applying deep learning to the problem of hand gesture recognition for the whole 24 hand gestures obtained from the Thomas Moeslund’s gesture recognition database. We show that more biologically inspired and deep neural networks such as convolutional neural network and stacked denoising autoencoder are capable of learning the complex hand gesture classification task with lower error rates. The considered networks are trained and tested on data obtained from the above-mentioned public database; results comparison is then made against earlier works in which only small subsets of the ASL hand gestures are considered for recognition.

and AI-assisted image manipulation tools, which The emergence of advanced image manipulation techniques in the digital age has made it extremely difficult to detect and categorize forged images. In order to identify and classify image forgeries, this study proposes a deep learning-based method that combines a Convolutional Neural Network (CNN) classifier with the You Only Look Once (YOLO) object detection model. The suggested system uses sophisticated feature extraction techniques to categorize images into authentic, copy-move, spliced, and deepfake forgeries after being trained on a custom dataset of manipulated images. While CNN-based classification offers accurate categorization, our experimental results show how reliable and effective YOLO is at locating forgery regions. Because of its high accuracy, the suggested model is a useful tool for security and digital forensics applications. Keywords: Image Forgery, YOLO, CNN, Deep Learning, Classification, Digital Forensics

Automatic target recognition (ATR) is a challenging task for several computer vision applications. It requires efficient, accurate, and robust methods for target detection and target identification. Deep learning has shown great success in many computer vision applications involving color RGB images. However, the performance of these networks in ATR with infrared sensor data needs further investigation. In this paper, we propose a multistage automatic target detection and recognition (ATDR) system that performs both target detection and target classification on infrared (IR) imagery using deep learning. Our system processes large IR image frames where targets take <1 % of the total number of pixels. First, we train a state-of-the-art object detector you only look once (YOLO) to localize all potential targets in the input image frame. Then, we train a convolutional neural network (CNN) to identify these detections as targets or false alarms. In this second phase, we adapt and analyze the performance of three CNN architectures: a compact and fully connected CNN, VGG16 with batch normalization, and a wide residual neural network (WRN). We also explore the use of a loss function that optimizes directly the area under the receiver operating characteristic (ROC) curve (AUC), and adapt it to our ATR application. To enhance the robustness of the proposed ATR to perturbation and variations introduced during the detection stage, we train our CNN classifiers on automatically detected targets using YOLO, in addition to ground truth bounding boxes and apply selected data augmentation techniques. To simulate real testing environments, where the spatial location of the targets within the image frame is unknown, only YOLO-detected boxes are used during validation. We evaluate our ATDR on a real benchmark dataset that includes different vehicles captured at different resolutions. Our experiments have shown that YOLO can detect most of the targets at the expense of generating a high number of false alarms. We show that the VGG-16 network with batch normalization, which is the best performing model, can correctly identify the classes of the targets, as well as classify the majority of YOLO’s false detections into an additional nontarget class. We also show that the proposed training modification to optimize an AUC-based loss function for ATR proved to be advantageous mainly in identifying difficult targets.

Human hand recognition plays an important role in a wide range of applications ranging from sign language translators, gesture recognition, augmented reality, surveillance and medical image processing to various Human Computer Interaction (HCI) domains. Human hand is a complex articulated object consisting of many connected parts and joints. Therefore, for applications that involve HCI one can find many challenges to establish a system with high detection and recognition accuracy for hand posture and/or gesture. Hand posture is defined as a static hand configuration without any movement involved. Meanwhile, hand gesture is a sequence of hand postures connected by continuous motions. During the past decades, many approaches have been presented for hand posture and/or gesture recognition. In this paper, we provide a survey on approaches which are based on Hidden Markov Models (HMM) for hand posture and gesture recognition for HCI applications.