A machine learning algorithm to estimate hydrodynamic coefficients of a jack-up vessel in frequency domain

Batteries, recognized as effective energy storage solutions, are considered the main facilitators of the world-wide transition towards clean and renewable energy sources. Among different types of batteries, lithium-ion (Li-ion) variants offer higher energy densities and relatively longer life spans when compared to other types. Nonetheless, a primary concern with these batteries is their lifetime. Batteries undergo various degradation mechanisms under storage and use, significantly impacting their lifespan. To this end, it is crucial to predict the degradation and lifetime of Li-ion batteries under given conditions.Researchers use three main methodologies to perform battery health diagnostics and to predict the lifetime of batteries. One approach revolves around using mechanistic, first-principle electrochemical models, also known as physics-based models. If equipped with proper thermodynamic theories, such models can show promising capabilities; however, holistic degradation prediction with these models is still challenging due to the computational complexities and the multitude of parameters that need to be fine-tuned in this approach. The other common strategy is to use empirical models to predict battery degradation. These models generally entail fewer parameters to be identified and are computationally less intensive to solve. Nonetheless, empirical models can suffer from the accuracy point-of-view as they are constrained to predict degradation trends introduced by certain degradation modes. Another common technique in battery life prediction is to utilize purely data-driven methods, such as machine learning (ML) algorithms, which also have shown promising results in the literature on rapid health predictions. However, these methods require large volumes of experimental data for training and testing ML models to ensure accuracy. In addition, data-driven methods are likely to extrapolate poorly to conditions beyond their training data and are indifferent towards the underlying degradation mechanisms. Recently, physics-informed machine learning (PI-ML) methods have garnered significant attention. They integrate physics-based or empirical models (developed based on physics) with a data-driven approach and allow one to train ML models on a smaller set of experimental data.To the best of the authors’ knowledge, the performance comparison between first-principle and empirical models when integrated within PI-ML remains unclear. Therefore, in this work, we aim to compare these two models when applied to prognostics (capacity forecasting and remaining useful life prediction) of a set of Li-ion batteries. To perform this study, we generate aging data for 40 Li-ion coin cells cycled under randomized conditions. Each cell undergoes a three-step charging stage followed by a two-step discharge stage. After obtaining the aging data, we will develop two PI-ML models, one equipped with a physics-based model and another with a set of empirical models. Both PI-ML models in this work will follow the sequential integration approach, where the training data for the final PI-ML model come from both experimental and computational data, the latter of which are obtained from the physics-based or empirical models. The parameters for the physics-based and empirical models are identified from another set of experimental data. Finally, the PI-ML models will be tested with experimental data obtained at different cycling conditions. The data flow for the sequential architecture of PI-ML is shown in the attached figure. This comparative study will help identify the performance of physics-based and empirical models when integrated into PI-ML. The main performance metric considered in this work is each model’s ability to extrapolate beyond the experimental training data set, hence aiding the final PI-ML model in generalizing to conditions not covered by its experimental training data set. Figure 1

BackgroundDespite the interest in machine learning (ML) algorithms for analyzing real-world data (RWD) in healthcare, the use of ML in predicting time-to-event data, a common scenario in clinical practice, is less explored. ML models are capable of algorithmically learning from large, complex datasets and can offer advantages in predicting time-to-event data. We reviewed the recent applications of ML for survival analysis using RWD in healthcare.MethodsPUBMED and EMBASE were searched from database inception through March 2023 to identify peer-reviewed English-language studies of ML models for predicting time-to-event outcomes using the RWD. Two reviewers extracted information on the data source, patient population, survival outcome, ML algorithms, and the Area Under the Curve (AUC).ResultsOf 257 citations, 28 publications were included. Random survival forests (N = 16, 57%) and neural networks (N = 11, 39%) were the most popular ML algorithms. There was variability across AUC for these ML models (median 0.789, range 0.6–0.950). ML algorithms were predominately considered for predicting overall survival in oncology (N = 12, 43%). ML survival models were often used to predict disease prognosis or clinical events (N = 27, 96%) in the oncology, while less were used for treatment outcomes (N = 1, 4%).ConclusionsThe ML algorithms, random survival forests and neural networks, are mainly used for RWD to predict survival outcomes such as disease prognosis or clinical events in the oncology. This review shows that more opportunities remain to apply these ML algorithms to inform treatment decision-making in clinical practice. More methodological work is also needed to ensure the utility and applicability of ML models in survival outcomes.

The purpose of this analysis is to assess the use of machine learning (ML) algorithms in the prediction of postoperative outcomes, including complications, recurrence, and death in transsphenoidal surgery. Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, we systematically reviewed all papers that used at least one ML algorithm to predict outcomes after transsphenoidal surgery. We searched Scopus, PubMed, and Web of Science databases for studies published prior to May 12, 2021. We identified 13 studies enrolling 5,048 patients. We extracted the general characteristics of each study; the sensitivity, specificity, area under the curve (AUC) of the ML models developed as well as the features identified as important by the ML models. We identified 12 studies with 5,048 patients that included ML algorithms for adenomas, three with 1807 patients specifically for acromegaly, and five with 2105 patients specifically for Cushing's disease. Nearly all were single-institution studies. The studies used a heterogeneous mix of ML algorithms and features to build predictive models. All papers reported an AUC greater than 0.7, which indicates clinical utility. ML algorithms have the potential to predict postoperative outcomes of transsphenoidal surgery and can improve patient care. Ensemble algorithms and neural networks were often top performers when compared with other ML algorithms. Biochemical and preoperative features were most likely to be selected as important by ML models. Inexplicability remains a challenge, but algorithms such as local interpretable model–agnostic explanation or Shapley value can increase explainability of ML algorithms. Our analysis shows that ML algorithms have the potential to greatly assist surgeons in clinical decision making.

Abstract. As air pollution is regarded as the single largest environmental health risk in Europe it is important that communication to the public is up to date and accurate and provides means to avoid exposure to high air pollution levels. Long- and short-term exposure to outdoor air pollution is associated with increased risks of mortality and morbidity. Up-to-date information on present and coming days' air quality helps people avoid exposure during episodes with high levels of air pollution. Air quality forecasts can be based on deterministic dispersion modelling, but to be accurate this requires detailed information on future emissions, meteorological conditions and process-oriented dispersion modelling. In this paper, we apply different machine learning (ML) algorithms – random forest (RF), extreme gradient boosting (XGB), and long short-term memory (LSTM) – to improve 1, 2, and 3 d deterministic forecasts of PM10, NOx, and O3 at different sites in Greater Stockholm, Sweden. It is shown that the deterministic forecasts can be significantly improved using the ML models but that the degree of improvement of the deterministic forecasts depends more on pollutant and site than on what ML algorithm is applied. Also, four feature importance methods, namely the mean decrease in impurity (MDI) method, permutation method, gradient-based method, and Shapley additive explanations (SHAP) method, are utilized to identify significant features that are common and robust across all models and methods for a pollutant. Deterministic forecasts of PM10 are improved by the ML models through the input of lagged measurements and Julian day partly reflecting seasonal variations not properly parameterized in the deterministic forecasts. A systematic discrepancy by the deterministic forecasts in the diurnal cycle of NOx is removed by the ML models considering lagged measurements and calendar data like hour and weekday, reflecting the influence of local traffic emissions. For O3 at the urban background site, the local photochemistry is not properly accounted for by the relatively coarse Copernicus Atmosphere Monitoring Service ensemble model (CAMS) used here for forecasting O3 but is compensated for using the ML models by taking lagged measurements into account. Through multiple repetitions of the training process, the resulting ML models achieved improvements for all sites and pollutants. For NOx at street canyon sites, mean squared error (MSE) decreased by up to 60 %, and seven metrics, such as R2 and mean absolute percentage error (MAPE), exhibited consistent results. The prediction of PM10 is improved significantly at the urban background site, whereas the ML models at street sites have difficulty capturing more information. The prediction accuracy of O3 also modestly increased, with differences between metrics. Further work is needed to reduce deviations between model results and measurements for short periods with relatively high concentrations (peaks) at the street canyon sites. Such peaks can be due to a combination of non-typical emissions and unfavourable meteorological conditions, which are rather difficult to forecast. Furthermore, we show that general models trained using data from selected street sites can improve the deterministic forecasts of NOx at the station not involved in model training. For PM10 this was only possible using more complex LSTM models. An important aspect to consider when choosing ML algorithms is the computational requirements for training the models in the deployment of the system. Tree-based models (RF and XGB) require fewer computational resources and yield comparable performance in comparison to LSTM. Therefore, tree-based models are now implemented operationally in the forecasts of air pollution and health risks in Stockholm. Nevertheless, there is big potential to develop generic models using advanced ML to take into account not only local temporal variation but also spatial variation at different stations.

Satellite-based aerosol optical property retrieval over land, especially size-related parameters, is challenging. This study proposed a novel two-stage machine learning (ML) algorithm for retrieving aerosol optical depth (AOD), Ångström exponent (AE), fine mode fraction (FMF), and fine mode AOD (FAOD)) over land using MODIS observed reflectance. The new ML algorithm consists of three steps: (1) first, all samples extracted from AERONET measurements were used to train the ML model, (2) then, to reduce the extreme estimation bias of the model, divided low-value and high-value samples were used to train low-value and high-value ML models, respectively, and (3) finally, the three ML models were integrated into the final retrieval based on the weight interpolation. Independent site network validation results show that the new ML algorithm has a Pearson correlation coefficient (R) of 0.894 (0.638, 0.661, 0.865) and root mean square error (RMSE) of 0.146 (0.258, 0.245, 0.153) for the AOD (AE, FMF, FAOD) retrieval, which significantly outperforms the validation metrics of MODIS operational products, with AOD (AE, FMF, FAOD) RMSE of 0.130-0.156 (0.536-0.569, 0.313, 0.191). The inter-comparison of aerosol products shows that the spatial patterns of AOD, AE, FMF, and FAOD of the new ML algorithm are in good agreement with those of the MODIS and POLDER products. These results illustrate that the new ML algorithm has good performance and transferability and indicate the ability of ML methods to be applied to multispectral instruments (such as MODIS) to retrieve multiple aerosol properties.

The integration of machine learning (ML) algorithms into audit processes represents a significant advancement in the field of auditing, offering substantial benefits in terms of efficiency, accuracy, and risk management. This review examines the transformative potential of ML in auditing, highlighting its key benefits and the challenges that must be addressed to fully leverage its capabilities. Machine learning algorithms, with their ability to analyze large datasets and identify patterns, enhance the accuracy and thoroughness of audits. Traditional auditing methods often rely on sampling and manual checks, which can miss anomalies and fraudulent activities. In contrast, ML algorithms can process entire datasets, uncovering subtle patterns and irregularities that may indicate fraud or errors. This comprehensive analysis reduces the risk of oversight and improves the reliability of audit findings. One of the primary benefits of ML in auditing is its capacity for anomaly detection. ML models can be trained on historical data to understand normal financial behavior and flag deviations that might signify irregularities. This ability to detect anomalies in real-time enables auditors to identify potential issues promptly, reducing the time lag between occurrence and detection of fraud. Predictive analytics, powered by ML, further enhances audit processes by forecasting future risks based on historical data. This proactive approach allows auditors to anticipate and mitigate risks before they materialize, contributing to more robust risk management strategies. Despite these advantages, integrating ML into audit processes presents several challenges. Ensuring data quality and integrity is crucial, as ML algorithms are only as good as the data they analyze. Poor-quality data can lead to inaccurate predictions and conclusions. Additionally, the "black box" nature of some ML algorithms can pose transparency issues, making it difficult for auditors to explain how specific conclusions were reached, which is critical for stakeholder trust and regulatory compliance. Another significant challenge is the potential for algorithmic bias. ML models can inadvertently perpetuate existing biases in the data, leading to unfair or skewed audit outcomes. Continuous monitoring and validation of ML algorithms are necessary to detect and mitigate such biases. In conclusion, while integrating machine learning algorithms into audit processes offers substantial benefits in terms of accuracy, efficiency, and risk management, it also necessitates careful attention to data quality, transparency, and bias mitigation. Addressing these challenges is essential to fully realize the potential of ML in enhancing audit practices. Keywords: Benefits, Challenges, Audit Processes, Algorithms, ML.

Propofol is a widely used sedative-hypnotic agent for critically-ill patients requiring invasive mechanical ventilation (IMV). Despite its clinical benefits, propofol is associated with increased risks of hypertriglyceridemia. Early identification of patients at risk for propofol-associated hypertriglyceridemia is crucial for optimizing sedation strategies and preventing adverse outcomes. Machine learning (ML) models offer a promising approach for predicting individualized patient risks of propofol-associated hypertriglyceridemia. We propose the development of a ML model aimed at predicting the risk of propofol-associated hypertriglyceridemia in ICU patients receiving IMV. The study will utilize retrospective data from four Mayo Clinic sites. Nested cross-validation (CV) will be employed, with a 10-fold inner CV loop for model tuning and selection as well as an outer loop using leave-one-site-out CV for external validation. Feature selection will be conducted using Boruta and LASSO-penalized logistic regression. Data preprocessing steps include missing data imputation, feature scaling, and dimensionality reduction techniques. Six ML algorithms will be tuned and evaluated. Bayesian optimization will be used for hyperparameter selection. Global model explainability will be assessed using permutation importance, and local model explainability will be assessed using SHapley Additive exPlanations (SHAP). The proposed ML model aims to provide a reliable and interpretable tool for clinicians to predict the risk of propofol-associated hypertriglyceridemia in ICU patients. The final model will be deployed in a web-based clinical risk calculator. The model development process and performance measures obtained during nested cross-validation will be described in a study publication to be disseminated in a peer-reviewed journal. The proposed study has received ethics approval from the Mayo Clinic Institutional Review Board (IRB #23-007416). Robust external validation using a nested cross-validation (CV) framework will help assess the generalizability of models produced from the modeling pipeline across different hospital settings.A diverse set of machine learning (ML) algorithms and advanced hyperparameter tuning techniques will be employed to identify the most optimal model configuration.Integration of feature explainability will enhance the clinical applicability of the ML models by providing transparency in predictions, which can improve clinician trust and encourage adoption.Reliance on retrospective data may introduce biases due to inconsistent or erroneous data collection, and the computational intensity of the validation approach may limit replication and future model expansion in resource-constrained settings.

This study presents a comparative analysis of the classification performance of facial and emotion recognition systems using Machine Learning (ML) and Deep Learning (DL) algorithms. The primary objective of this work is to evaluate the applicability of emotion recognition in fields such as psychotherapy and crime analysis, using the FER-2013 dataset.The study was conducted with ML algorithms such as Support Vector Machines (SVM), Random Forest (RF), K-Nearest Neighbor (KNN), Decision Trees, and Gradient Boosting, as well as the DL algorithm, Convolutional Neural Network (CNN). Supported by the application of feature selection, preprocessing, and feature extraction techniques, the model’s performance was measured using standard metrics such as accuracy, precision, F1-score, and AUC-ROC.The experimental results showed that the highest classification accuracy (46.61%) was achieved with the CNN model. While the ML models generally offered lower accuracy, they provided advantages in terms of computational efficiency in specific scenarios.This study aims to contribute to the literature by providing a comparative analysis of ML and DL algorithms and by highlighting the effect of data preprocessing on performance. The findings set targets for future work, such as real-time system integration and hybrid model development.

The rapid growth of the Internet and information technologies and also the diminution of the price of hardware components like wireless sensors leads to the fast growth in Wireless Sensor Network (WSN). The WSN is a bunch/group of sensors that are located across the area, in order to monitor and determine environmental conditions such as temperature, humidity, vibrations, wind, water levels, pollution levels. WSNs are susceptible to major attacks like Denial of Service (DOS), Wormhole attack, Sinkhole attack, etc. The main threat to the WSN is because of the broadcast nature of the nodes in the network. Therefore, the security of WSNs is the essential part that must be done. Hence, to overcome these problems or threats, we are trying to detect it using AI technology. With the expanding fields of Machine Learning and Deep Learning, we can apply various algorithms in order to classify different types of attacks. Once we detect the attack properly, we can prevent it accordingly. We are using WSN-DS. It has 4 classes of attacks which are Grayhole, Blackhole, TDMA(Scheduling), and Flooding which comes under the category of DOS attacks. In this chapter, we have analysed and compared the accuracies of 5 main machine learning classification algorithms. Also, we have analysed the 1 deep learning algorithm. The ANN (Artificial Neural Network) and 5 machine learning algorithms have been trained on the dataset. Furthermore, we have used K-fold cross-validation to get even more accurate predictions. After analysis of these algorithms, we came to the point that, the Machine Learning algorithms like Random Forest, Support Vector Machines and Deep Learning algorithm, namely, Artificial Neural Network can help us for detecting intrusions in the system or network. This will help researchers in designing their own machine learning model on top of our suggested model.

Machine learning (ML) models provide more choices to patients with diabetes mellitus (DM) to more properly manage blood glucose (BG) levels. However, because of numerous types of ML algorithms, choosing an appropriate model is vitally important. In a systematic review and network meta-analysis, this study aimed to comprehensively assess the performance of ML models in predicting BG levels. In addition, we assessed ML models used to detect and predict adverse BG (hypoglycemia) events by calculating pooled estimates of sensitivity and specificity. PubMed, Embase, Web of Science, and Institute of Electrical and Electronics Engineers Explore databases were systematically searched for studies on predicting BG levels and predicting or detecting adverse BG events using ML models, from inception to November 2022. Studies that assessed the performance of different ML models in predicting or detecting BG levels or adverse BG events of patients with DM were included. Studies with no derivation or performance metrics of ML models were excluded. The Quality Assessment of Diagnostic Accuracy Studies tool was applied to assess the quality of included studies. Primary outcomes were the relative ranking of ML models for predicting BG levels in different prediction horizons (PHs) and pooled estimates of the sensitivity and specificity of ML models in detecting or predicting adverse BG events. In total, 46 eligible studies were included for meta-analysis. Regarding ML models for predicting BG levels, the means of the absolute root mean square error (RMSE) in a PH of 15, 30, 45, and 60 minutes were 18.88 (SD 19.71), 21.40 (SD 12.56), 21.27 (SD 5.17), and 30.01 (SD 7.23) mg/dL, respectively. The neural network model (NNM) showed the highest relative performance in different PHs. Furthermore, the pooled estimates of the positive likelihood ratio and the negative likelihood ratio of ML models were 8.3 (95% CI 5.7-12.0) and 0.31 (95% CI 0.22-0.44), respectively, for predicting hypoglycemia and 2.4 (95% CI 1.6-3.7) and 0.37 (95% CI 0.29-0.46), respectively, for detecting hypoglycemia. Statistically significant high heterogeneity was detected in all subgroups, with different sources of heterogeneity. For predicting precise BG levels, the RMSE increases with a rise in the PH, and the NNM shows the highest relative performance among all the ML models. Meanwhile, current ML models have sufficient ability to predict adverse BG events, while their ability to detect adverse BG events needs to be enhanced. PROSPERO CRD42022375250; https://www.crd.york.ac.uk/prospero/display_record.php?RecordID=375250.

Machine learning (ML) algorithms are increasingly used to predict outcomes in orthopaedic surgery, but their utility in hip arthroscopy remains unclear. This study aimed to (1) evaluate ML models for predicting outcomes, complications, and resource use following hip arthroscopy, (2) compare ML performance to traditional statistical methods, and (3) critically appraise the quality of existing literature. A systematic search of PUBMED, MEDLINE, EMBASE and the Cochrane Central Register of Controlled Trials was conducted on 4 April 2023. Included studies used ML models for clinical prediction in hip arthroscopy. Data on study design, outcomes, model development, validation and adherence to TRIPOD guidelines were extracted. Seventeen studies involving 37,549 patients (52.8% female; mean age 34.4 ± 6.1 years) were included. ML was used to predict clinical outcomes (47.1%), adverse events (47.1%) and resource utilisation (5.9%). The median area under the curve was 0.66 (range 0.5-0.94) for clinical outcomes and 0.7 (range 0.6-0.9) for adverse events. Resource utilisation was reported with a root-mean-square error of $3800, a logarithmic error of 0.2, and R² of 0.8. Only four studies compared ML to traditional regression; two found no difference, while two favoured ML. On average, studies met 12.3 of the 22 TRIPOD criteria, with only 29.4% meeting more than two-thirds. ML models in hip arthroscopy show variable performance in predicting outcomes and complications. Furthermore, most studies comparing ML models to traditional regression did not report any significant difference. Lastly, variability in adherence to TRIPOD guidelines highlights the need for future studies to improve transparency and reporting in the development of ML algorithms for hip arthroscopy. Given the potential of ML models in enhancing clinical decision-making for hip arthroscopy, along with the findings of the current study, their application should be used with caution. Level IV, systematic review of level II-IV studies.

Cervical cancer is a highly prevalent malignancy affecting women worldwide, ranking as the seventh most common cancer globally. This study aims to systematically review and analyze cervical cancer survival predictions using machine learning (ML) algorithms. A comprehensive search was conducted across Scopus and PubMed databases in February 2024. Extracted articles were screened using Hubmeta software, with duplicates and non-relevant studies excluded. The final selection, comprising 24 articles, focused on survival predictions through ML techniques. These studies, published mostly post-2019, included datasets ranging from 75 to 9,462 cervical cancer patients and up to 91,294 squamous cell samples. The most commonly applied ML models were Random Forest (RF), Neural Networks (NN), Support Vector Machines (SVM), Ensemble and Hybrid Learning, and Deep Learning (DL). The area under the curve (AUC) for these models ranged from 0.84 to 0.9875, demonstrating their strong predictive capabilities. Clinical patient records were the primary data source. Meta-analysis was performed on the extracted data using GraphPad Prism for descriptive statistics and One-Way ANOVA. No significant differences were found between group means, as evidenced by an R-squared value of 0.1459. This result indicates that the independent variable (year of study) explained only 14.59% of the variance in ML model performance. The study found that the use of ML models has increased over time, particularly with Convolutional Neural Networks (CNNs) such as the ResNet50 model, which demonstrated superior accuracy metrics, including over 90% accuracy for the ResNet152 variant. These findings suggest that integrating multi-dimensional data with ML models holds significant potential for improving survival predictions in cervical cancer patients. Future research is recommended to develop tailored ML algorithms with even higher predictive accuracy for cervical cancer survival.

Surgical site infection (SSI) following a neurosurgical operation is a complication that impacts morbidity, mortality, and economics. Currently, machine learning (ML) algorithms are used for outcome prediction in various neurosurgical aspects. The implementation of ML algorithms to learn from medical data may help in obtaining prognostic information on diseases, especially SSIs. The purpose of this study was to compare the performance of various ML models for predicting surgical infection after neurosurgical operations. A retrospective cohort study was conducted on patients who had undergone neurosurgical operations at tertiary care hospitals between 2010 and 2017. Supervised ML algorithms, which included decision tree, naive Bayes with Laplace correction, k-nearest neighbors, and artificial neural networks, were trained and tested as binary classifiers (infection or no infection). To evaluate the ML models from the testing data set, their sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV), as well as their accuracy, receiver operating characteristic curve, and area under the receiver operating characteristic curve (AUC) were analyzed. Data were available for 1471 patients in the study period. The SSI rate was 4.6%, and the type of SSI was superficial, deep, and organ/space in 1.2%, 0.8%, and 2.6% of cases, respectively. Using the backward stepwise method, the authors determined that the significant predictors of SSI in the multivariable Cox regression analysis were postoperative CSF leakage/subgaleal collection (HR 4.24, p < 0.001) and postoperative fever (HR 1.67, p = 0.04). Compared with other ML algorithms, the naive Bayes had the highest performance with sensitivity at 63%, specificity at 87%, PPV at 29%, NPV at 96%, and AUC at 76%. The naive Bayes algorithm is highlighted as an accurate ML method for predicting SSI after neurosurgical operations because of its reasonable accuracy. Thus, it can be used to effectively predict SSI in individual neurosurgical patients. Therefore, close monitoring and allocation of treatment strategies can be informed by ML predictions in general practice.

Developing Machine Learning (ML) algorithms for heterogeneous/mixed data is a longstanding problem. Many ML algorithms are not applicable to mixed data, which include numeric and non-numeric data, text, graphs and so on to generate interpretable models. Another longstanding problem is developing algorithms for lossless visualization of multidimensional mixed data. The further progress in ML heavily depends on success interpretable ML algorithms for mixed data and lossless interpretable visualization of multidimensional data. The later allows developing interpretable ML models using visual knowledge discovery by end-users, who can bring valuable domain knowledge which is absent in the training data. The challenges for mixed data include: (1) generating numeric coding schemes for non-numeric attributes for numeric ML algorithms to provide accurate and interpretable ML models, (2) generating methods for lossless visualization of n-D non-numeric data and visual rule discovery in these visualizations. This paper presents a classification of mixed data types, analyzes their importance for ML and present the developed experimental toolkit to deal with mixed data. It combines the Data Types Editor, VisCanvas data visualization and rule discovery system which is available on GitHub.

Aim: Machine learning (ML) and deep learning (DL) predictive models have been employed widely in clinical settings. Their potential support and aid to the clinician of providing an objective measure that can be shared among different centers enables the possibility of building more robust multicentric studies. This study aimed to propose a user-friendly and low-cost tool for COVID-19 mortality prediction using both an ML and a DL approach. Method: We enrolled 2348 patients from several hospitals in the Province of Reggio Emilia. Overall, 19 clinical features were provided by the Radiology Units of Azienda USL-IRCCS of Reggio Emilia, and 5892 radiomic features were extracted from each COVID-19 patient’s high-resolution computed tomography. We built and trained two classifiers to predict COVID-19 mortality: a machine learning algorithm, or support vector machine (SVM), and a deep learning model, or feedforward neural network (FNN). In order to evaluate the impact of the different feature sets on the final performance of the classifiers, we repeated the training session three times, first using only clinical features, then employing only radiomic features, and finally combining both information. Results: We obtained similar performances for both the machine learning and deep learning algorithms, with the best area under the receiver operating characteristic (ROC) curve, or AUC, obtained exploiting both clinical and radiomic information: 0.803 for the machine learning model and 0.864 for the deep learning model. Conclusions: Our work, performed on large and heterogeneous datasets (i.e., data from different CT scanners), confirms the results obtained in the recent literature. Such algorithms have the potential to be included in a clinical practice framework since they can not only be applied to COVID-19 mortality prediction but also to other classification problems such as diabetic prediction, asthma prediction, and cancer metastases prediction. Our study proves that the lesion’s inhomogeneity depicted by radiomic features combined with clinical information is relevant for COVID-19 mortality prediction.