A multiple-scale power series method for solving nonlinear ordinary differential equations

In order to provide simple and accurate wave theory in design of offshore structure, an analytical approximation is introduced in this paper. The solution is limited to flat bottom having a constant water depth. Water is considered as inviscid, incompressible and irrotational. The solution satisfies the continuity equation, bottom boundary condition and non-linear kinematic free surface boundary condition exactly. Error for dynamic condition is quite small. The solution is suitable in description of breaking waves. The solution is presented with closed form and dispersion relation is also presented with closed form. In the last century, there have been two main approaches to the nonlinear problems. One of these is perturbation method. Stokes wave and Cnoidal wave are based on the method. The other is numerical method. Dean’s stream function theory is based on the method. In this paper, power series method was considered. The power series method can be applied to certain nonlinear differential equations (initial value problems). The series coefficients are specified by a nonlinear recurrence inherited from the differential equation. Because the non-linear wave problem is a boundary value problem, the power series method cannot be applied to the problem in general. But finite number of coefficients is necessary to describe the wave profile, truncated power series is enough. Therefore the power series method can be applied to the problem. In this case, the series coefficients are specified by a set of equations instead of recurrence. By using the set of equations, the nonlinear wave problem has been solved in this paper.

Domain-partition power series in vibration analysis of variable-cross-section rods

A nonlinear loaded differential equation with a parameter on a finite interval is studied. The interval is partitioned by the load points, at which the values of the solution to the equation are set as additional parameters. A nonlinear boundary value problem for the considered equation is reduced to a nonlinear multipoint boundary value problem for the system of nonlinear ordinary differential equations with parameters. For fixed parameters, we obtain the Cauchy problems for ordinary differential equations on the subintervals. Substituting the values of the solutions to these problems into the boundary condition and continuity conditions at the partition points, we compose a system of nonlinear algebraic equations in parameters. A method of solving the boundary value problem with a parameter is proposed. The method is based on finding the solution to the system of nonlinear algebraic equations composed.

Solution of nonlinear boundary value problems — I method of third order convergence for solution of nonlinear two-point boundary value problems single second order equation

Problems connected with a shock interaction of a thin elastic cylindrical bar and an elastic sphere with an Uflyand-Mindlin plate of a finite size are considered. In enumerated problems, an impact process is accompanied by material local deformations and propagation of wave surfaces of a strong or weak discontinuity in elastic bodies coming in contact. The local deformations are taken into account in terms of the Hertz's contact theory, but the dynamic deformations behind the fronts of incident and reflected waves are determined by means of truncated power series with variable coefficients (what is known as ray series). These two types of deformations are mated on the contact region boundary. As the truncated ray series, as a rule, are not uniformly applicable in the whole region of the wave solution existence, then for their improvement the method of “forward-area” regularization is used which is based on a combination of the recurrent equations of the ray method with the method of multiple scales. The method of power series (ray method) allows one to find the main characteristics of the impact theory in an analytical form.

In this paper, the nonlinear free vibrations of thin symmetric and non-symmetric cross-ply composite plates subjected to biaxial initial stresses are investigated. Because of their excellent properties such as specific strength and specific stiffness, composite plates have wide applications in aerospace and mechanical structures. Based on Von-Karman's strain-displacement relations and using Galerkin method, the nonlinear differential equation of free vibrations of initially stressed composite plate is obtained. This nonlinear equation is solved using two different analytical perturbation methods, namely method of multiple scales (MTS) and homotopy perturbation method (HPM), to analyze the nonlinear vibrations of initially stressed cross-ply composite plates. Effects of tensile and compressive biaxial initial stresses, initial vibration amplitude, thickness, and aspect ratios of the composite plates on the frequency behavior are investigated. The validity of the results is confirmed by making a comparison with those reported in the literature. According to the results, both analytical solutions show increasing trends for natural frequency parameters by increasing normal initial stresses. Regardless of the value of initial biaxial stresses, for both symmetric and non-symmetric plates, the results of MTS and HPM are in close agreement for the smallest initial amplitude. However, for compressive initial stresses, by increasing initial amplitude ratios, the discrepancies between the results of HPM and MTS increase for symmetric and non-symmetric plates. Although HPM includes less computational effort (smaller length of formulation) than MTS, the linear-to-nonlinear frequency ratios obtained using MTS method become closer to those obtained by HPM as initial vibration amplitude is decreased and initial stress is increased.

The article proposes original solvability conditions and the scheme for finding solutions of the nonlinear Noetherian differential-algebraic boundary value problem. And we use the matrix pseudo-inversion technique of Moore-Penrose. The posed problem in the article continues the study of conditions of solvability and schemes for finding solutions of the nonlinear Noetherian boundary-value problems given in the monographs by A. Poincare, A.M. Lyapunov, I.G. Malkin, J. Hale, Yu.A. Ryabov, A.M. Samoylenko, N.V. Azbelev, V.P. Maksimov, L.F. Rakhmatullina and A.A. Boychuk. We studied a general case, when a linear bounded operator corresponding to the homogeneous part of the linear Noetherian differential-algebraic boundary value problem has no inverse. Sufficient conditions for reducibility of the differential algebraic equation to the system uniting a differential and algebraic equation are found. Thus, the differential-algebraic boundary value problem is reduced to the nonlinear Noetherian boundary value problem for the system of ordinary differential equations. We studied the case of the presence of simple roots of the equation for generating amplitudes. Constructive necessary and sufficient conditions of existence were obtained to find solutions to the problem in the critical case, and the converging iterative scheme was constructed. The proposed solvability conditions, and the scheme for finding solutions of the nonlinear Noetherian differential-algebraic boundary value problem are illustrated in detail by the example from the nonlinear Noetherian differential-algebraic boundary value problem for Duffing type equations. For control of the rate of the iterative scheme convergence to the exact solution of the differential-algebraic boundary value problem for the Duffing type equation, we used the residuals of the obtained approximations in the Duffing type equation in the space of continuous functions.

This work presents the application of the power series method (PSM) to find solutions of nonlinear delay differential equations of pantograph type (PDDEs). Three equations are solved to show that PSM can provide analytical solutions of PDDEs in convergent series form. The nonlinear pantograph cases study are: a first order equation, a second order equation, and a second order singular equation. Additionally, we present the post-treatment of the power series solutions with the Laplace-Pad ´ e (LP) resummation method as a powerful technique to find exact solutions. The proposed methodology possesses a simple procedure based on a few straightforward steps and it does not depend on a perturbation parameter.

Numerical integration of ordinary differential equa tions containing nonanalytical functions is error- prone and time-consuming. Because of this problem, the simulation of the hydraulic servo drive of a machine tool produced unsatisfactory results. How ever, applying power-series expansions provided fast and accurate solutions. Due to its pieceuise semi- analytic character, this method is particularly suited to handling discontinuities. Although it re quires the calculation of higher derivatives by means of recursion formulas, the power-series method can be completely automated. A simulation package for this purpose is currently under development. Two examples compare its performance with that of Runge-Kutta- Merson integration.

The main objective of this paper is to develop new spectral solutions for linear and nonlinear fifth-order boundary value problems. For this aim, a new operational matrix of derivatives of certain nonsymmetric generalized Jacobi polynomials is established. The key idea for obtaining the suggested spectral solutions is to convert the fifth-order linear and nonlinear boundary value problems into systems of linear or nonlinear algebraic equations which can be efficiently solved by suitable solvers. A theoretical error bound is derived and the convergence analysis of the proposed expansion is proved. Numerical tests are presented aiming to ascertain the high efficiency and accuracy of the suggested algorithms.

In the present paper, $P-$distributional convergence which is defined by power series method has been introduced. We give equivalent expressions for $P-$distributional convergence of spliced sequences. Moreover, convergence of a bounded $\infty$-spliced sequence via power series method is represented in terms of Bochner integral in Banach spaces.

Fractional nonlinear partial differential equations are used in many scientific fields to model various processes, although most of these equations lack closed-form solutions. For this reason, methods for approximating solutions that occasionally yield closed-form solutions are crucial for solving these equations. This study introduces a novel technique that combines the residual function and a modified fractional power series with the Elzaki transform to solve various nonlinear problems within the Caputo derivative framework. The accuracy and effectiveness of our approach are validated through analyses of absolute, relative, and residual errors. We utilize the limit principle at zero to identify the coefficients of the series solution terms, while other methods, including variational iteration, homotopy perturbation, and Adomian, depend on integration. In contrast, the residual power series method uses differentiation, and both approaches encounter difficulties in fractional contexts. Furthermore, the effectiveness of our approach in addressing nonlinear problems without relying on Adomian and He polynomials enhances its superiority over various approximate series solution techniques.

In this work, the electrohydrodynamic flow equation of a fluid in an ion drag configuration in a circular cylindrical conduit is considered. The differential equation of the problem is a highly nonlinear and singular boundary value problem (BVP). An analytical solution of the problem is presented using the differential transform method (DTM). In this method, the differential equation and related boundary conditions transformed into a recurrence set of equations and at the end, the coefficients of Taylor series are calculated based on the solution of this set of equations. DTM results are compared with the numerical solution of the problem and an excellent accuracy is observed. It showed that the proposed method overcame the nonlinearity and singularity of the problem without any need to restrict assumptions or linearization. Most of the scientific problems and engineering phenomena are usually defined based on the nonlinear differential equations of both initial value problems (IVP) and boundary value problems (BVP). It is important to remember that except a limited number of these problems, finding exact analytical solution is difficult. Therefore, researchers use semi-analytical techniques and numerical methods. The semi-analytical methods such as the perturbation method (PM), Adomian decomposition method (ADM), variational iteration method (VIM), homotopy perturbation method (HPM), homotopy analysis method (HAM), and differential transform method (DTM) are useful mathematical ones, which present the analytical solutions for nonlinear differential equations. In this paper, solution of electrohydrodynamic flow equation of a fluid in an ion drag configuration in a circular cylindrical conduit is presented using DTM. Already, the electrohydrodynamic flow of a fluid and its governing equations is considered (1). The electrohydrodynamic flow is important in analysis of the flow meters, accelerators, pumps and magnetohydrodynamic generators. The differential equation of the problem is the nonlinear singular boundary value problem. 2 2

In this paper, we use shifted Chebyshev approximations with the second kind [25] and fractional power series method (FPSM) ([3], [8]) to solve the multi-order non-linear fractional differential equations. The fractional derivative is described in the Caputo sense. The properties of shifted Chebyshev polynomials with the second kind are utilized to reduce multi-order NFDEs. The system of non-linear of algebraic equations which solved by using Newton iteration method. We compared with FPSM. The results are compared withthe traditional methods [23].

In the article we obtained sufficient conditions of the existence of the nonlinear Noetherian boundary value problem solution for the system of differential-algebraic equations which are widely used in mechanics, economics, electrical engineering, and control theory. We studied the case of the nondegenerate system of differential algebraic equations, namely: the differential algebraic system that is solvable relatively to the derivative. In this case, the nonlinear system of differential algebraic equations is reduced to the system of ordinary differential equations with an arbitrary continuous function. The studied nonlinear differential-algebraic boundary-value problem in the article generalizes the numerous statements of the non-linear non-Gath boundary value problems considered in the monographs of А.М. Samoilenko, E.A. Grebenikov, Yu.A. Ryabov, A.A. Boichuk and S.M. Chuiko, and the obtained results can be carried over matrix boundary value problems for differential-algebraic systems. The obtained results in the article of the study of differential-algebraic boundary value problems, in contrast to the works of S. Kempbell, V.F. Boyarintsev, V.F. Chistyakov, A.M. Samoilenko and A.A. Boychuk, do not involve the use of the central canonical form, as well as perfect pairs and triples of matrices. To construct solutions of the considered boundary value problem, we proposed the iterative scheme using the method of simple iterations. The proposed solvability conditions and the scheme for finding solutions of the nonlinear Noetherian differential-algebraic boundary value problem, were illustrated with an example. To assess the accuracy of the found approximations to the solution of the nonlinear differential-algebraic boundary value problem, we found the residuals of the obtained approximations in the original equation. We also note that obtained approximations to the solution of the nonlinear differential-algebraic boundary value problem exactly satisfy the boundary condition.