- Research Article
19
- 10.1016/0165-1684(93)90100-o
Generalized OS CFAR detector with noncoherent integration
- Mar 01, 1993
- Signal Processing
- Chang-Joo Kim + 2 more +2
Generalized OS CFAR detector with noncoherent integration
In this paper, we deal with the problem of radar target detection in presence of severe interfering targets. To this end, we propose a new Constant False Alarm Rate (CFAR) detection approach based on evaluating the abrupt changes in the background power level samples i.e number of interfering target and/or clutter edge. The proposed new detector is a CFAR detector based on a difference hypothesis of second order statistics, referred as SOD-CFAR detector. Unlike some recent works that use the information theoretic criteria (ITC) or the variability of the background clutter power level samples, this contribution detects the abrupt changes, analyzes the distribution exponentially of the remaining samples and select the homogeneous window based on the second-order statistics and the Shapiro-Wilk exponentially test. The proposed CFAR detector does not require any prior information about the background environment. Therefore, the performances of the proposed detector combine the advantages of the Order Statistics-CFAR (OS-CFAR) and the Cell Averaging CFAR (CA-CFAR) detectors to immune to the presence of randomness interfering targets among the reference cells. Numerical simulations that validate the performances of the proposed detector, in both homogeneous and nonhomogeneous environments, are presented.
Generalized OS CFAR detector with noncoherent integration
Generalized OS CFAR detector with noncoherent integration
Network Intrusion Detection Using CFAR Abrupt-Change Detectors
In this paper, the constant false alarm rate (CFAR) detectors are proposed for network intrusion detection. By using an autoregressive system to model the network traffic, predictor error is shown to closely follow a Gaussian distribution. CFAR detector approaches are then developed on the prediction error distribution. In the present study, we consider the optimal CFAR, the cell-averaging CFAR, and the order statistics CFAR. The use of these CFAR techniques can significantly improve the detection performance. In addition, we propose the use of fusion of these CFAR detectors by using Dempster-Shafer and Bayesian techniques. Computer simulations based on the DARPA traffic data show that the proposed approach achieves higher detection probabilities than the conventional detection method. Even under different types of attacks, the intrusion detection performances based on the proposed CFAR detectors shows consistent improvement.
Read moreAnalysis of the Generalized Order Statistics Constant False Alarm Rate Detector
In this paper, we present an architecture of the constant false alarm rate (CFAR) detector called the generalized order statistics (GOS) CFAR detector, which covers various order statistics (OS) and cell-averaging (CA) CFAR detectors as special cases. For the proposed GOS CFAR detector, we obtain unified formulas for the false alarm and detection probabilities. By properly choosing coefficients of the GOS CFAR detector, one can utilize any combination of ordered samples to estimate the background noise level. Thus, if we use a reference window of size N, we can realize kinds of CFAR processors and obtain their performances from the unified formulas. Some examples are the CA, the OS, the censored mean level, and the trimmed mean CFAR detectors. As an application of the GOS CFAR detector to multiple target detection, we propose an algorithm called the adaptive mean level detector, which censors adaptively the interfering target returns in a reference window.
Read moreConstant false alarm rate detector based on the maximal reference cell
Constant false alarm rate detector based on the maximal reference cell
CFAR Target Detector in Synthetic Aperture Radar
Introduction. Constant false alarm rate (CFAR) detectors have found application in synthetic aperture radar (SAR) systems. The operating principle of a classic cell averaging detector (CA-CFAR detector) is based on comparing the decision statistics in the test resolution element with an adaptive threshold, which is calculated from signals in the reference cells. The decision statistic is an estimate of the signal power. Therefore, target signal detection is based on the brightness contrast of the test and reference resolution cells. Such a detector is optimal provided that the noise background is homogeneous. In cases where the background homogeneity is violated, the quality of detection deteriorates. There are several known methods for improving the quality of detection (GO-CFAR, SO-CFAR, OS-CFAR, etc.). However, the precise principle of detection by brightness contrast in such CFAR detectors remains unchanged.Aim. To synthesize a CFAR detector that uses not only the brightness contrast between the test and reference resolution cells, but also the spectral differences of the signals.Materials and methods. The proposed CFAR detector uses estimates of the algebraic moments of the power spectral density of signals in range cells, based on which three decision statistics are calculated containing information about the power, the position of the energy center, and the width of the signal spectrum. The decision about the presence of a target in the test cell is carried out according to the 2/3 rule (2 threshold overshoots out of 3 comparisons).Results. A comparison of the proposed detector with the SO-CFAR detector, performed by computer simulation, showed that, under a signal-to-clutter ratio of -6 dB and a false alarm probability of 10-4, the detection probability of the proposed detector was 0.933 versus 0.708 for the SO-CFAR detector.Conclusion. The article proposes a three-parameter CFAR detector for a synthetic aperture radar system, in which the decision on the presence of a target in the test cell is made via estimation of the first three algebraic moments of the signal spectrum. The synthesized detection algorithm can also be used when detecting moving targets in SAR.
Read moreAutomatic dual censoring cell-averaging CFAR detector in non-homogenous environments
Automatic dual censoring cell-averaging CFAR detector in non-homogenous environments
Design of low-loss CFAR detectors
Recently a method for detecting the presence of nonhomogeneity in constant false alarm rate (CFAR) reference windows using the rare event mean-to-mean ratio (MMR) test has been proposed. In this paper, an application of the MMR test to the design of new CFAR detectors is presented. A combination of the cell-averaging CFAR (CA-CFAR), MMR detector, and either ordered-statistic CFAR (OS-CFAR), smaller-of CFAR (SO-CFAR), or greater-of CFAR (GO-CFAR) is examined. A distinctive feature of the proposed combination is that the newly combined CFAR detectors have lower CFAR loss when operating on a homogeneous background while having the same robustness like those of the OS-, SO-, or GO-CFARs in the presence of interference.
Read moreFuzzy statistical normalization for target detection in active sensing data
A fuzzy statistical normalization for target detection in active sensing data is proposed in this paper. The first stage of the fuzzy statistical normalization is the Fuzzification of the active sensing data. Then the fuzzy inference and defuzzification operation based on statistical method and alpha-cut approach are performed, which not only attenuate the heavier tailed clutter data values, but also enlarge the lower shadow area noise data values. The constant false alarm rate (CFAR) detector based on fuzzy statistical normalization firstly estimates the background level with the normalized data, and then detects the target signal with the original active sensing data based on the estimated background level. Performance comparison between the proposed CFAR detector with outlier rejection based on fuzzy statistical normalization and the conventional CFAR detectors is carried out to validate the superiority of the proposed fuzzy statistical normalization in CFAR detection. The results show that the CFAR detector with fuzzy statistical normalization is robust.
Read moreOrder Statistic and Algebraic Product CFAR Detector for Weibull Clutter
A new radar constant false alarm rate (CFAR) detection algorithm operating in Weibull clutter is developed. In the proposed CFAR detector, that called order statistic and algebraic product (OSAP) CFAR detector, the output of OS processors on the both lagging and leading windows around the test cell are weighted by fuzzy weighting function (membership function) and are combined by algebraic product (AP) rule to get a better detection performance. The weighing function of this detector is obtained and the performance of the OSAP detector is evaluated and compared with the OSGO and OSSO-CFAR detectors. The results represent that the detection performance of OSAP-CFAR detector is superior to than of OSGO and OSSO CFAR detectors in the homogenous background and in multiple interfering targets situations.
Read moreA robust adaptive amplitude iteration CFAR detector in nonhomogeneous clutter environment
Constant false alarm rate (CFAR) detectors are widely used in modern radar system to declare the presence of targets. Due to the serious masking effects under the multiple targets situation and the clutter edge, the detection probability of CFAR detectors decrease sharply and the alarm rates increase significantly. To solve these problems, a robust adaptive amplitude iteration CFAR (AAI-CFAR) algorithm is proposed in this paper and obtains good performance. By combining the 2nd-order statistic, variability index, and the 4th-order statistic, kurtosis, a variable scaling factor is designed in the amplitude iteration to adapt different environment. Plenty of Monte Carlo simulations are applied to evaluate the performance of the proposed method under different clutter scenarios compared with existing CFAR detectors, which illustrate the superiority and robustness of AAI-CFAR.
Read more2-D CFAR Procedure of Multiple Target Detection for Automotive Radar
<div>In Advanced Driver Assistant System (ADAS), the automotive radar is used to detect targets or obstacles around the vehicle. The procedure of Constant False Alarm Rate (CFAR) plays an important role in adaptive targets detection in noise or clutter environment. But in practical applications, the noise or clutter power is absolutely unknown and varies over the change of range, time and angle. The well-known cell averaging (CA) CFAR detector has a good detection performance in homogeneous environment but suffers from masking effect in multi-target environment. The ordered statistic (OS) CFAR is more robust in multi-target environment but needs a high computation power. Therefore, in this paper, a new two-dimension CFAR procedure based on a combination of Generalized Order Statistic (GOS) and CA CFAR named GOS-CA CFAR is proposed. Besides, the Linear Frequency Modulation Continuous Wave (LFMCW) radar simulation system is built to produce a series of rapid chirp signals. Then the echo signals are converted into a two-dimensional Range-Doppler matrix (RDM), which contains information about the targets as well as background clutter and noise, through twice Fast Fourier Transform (FFT).The simulation experimental results show that compared to the two-dimensional OS-CA CFAR, the new 2-D GOS-CA CFAR can enhance the detection performance and robustness in the actual multi-target environment with lower computational complexity.</div>
Read morePerformance off order-statistics CFAR detector with noncoherent integration in homogeneous situations
The order-statistics (OS) constant-false-alarm-rate (CFAR) detector has been known to have a small loss in detection performance relative to the cell-averaging (CA) CFAR detector in homogeneous situations. However, it results in much less performance degradation in nonhomogeneous situations, i.e. the OS CFAR detector has significant performance gain over the CA CFAR detector in nonhomogeneous environments. In general, as the frequency diversity between noncoherent pulse bursts is prevalent in radar detection systems, detection analysis of the OS CFAR detector with noncoherent integration is needed. In the paper, for the chi-square family of fluctuating targets with an integer fluctuation parameter, the detection performance of the OS CFAR detector with noncoherent integration in homogeneous situations, is discussed.
Read moreDecentralized CFAR detection based on order statistics
In this paper, we analyze the performance of distributed constant false alarm rate (CFAR) detection with data fusion both in homogeneous and nonhomogeneous Gaussian backgrounds. We employ the ordered statistics (OS) CFAR detectors as local detectors. In the homogeneous background, we maximize the global probability of detection for a given fixed global probability of false alarm by optimizing both the threshold multipliers and the order numbers of the local OS-CFAR detectors. In the nonhomogeneous background with multiple targets or clutter edges, we analytically analyze the performance of the detection system and compare its performance with the performance of the distributed cell-averaging (CA) CFAR detection system.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">></ETX>
Read moreA novel approach for CFAR processors design
Two novel constant false alarm rate (CFAR) detectors, the And-CFAR and Or-CFAR, are proposed, The two new CFAR detectors improve the conventional cell averaging CFAR (CA-CFAR) and order statistics CFAR (OS-CFAR) by making full use of the cell information. The novel CFAR processors combine the result of the CA-CFAR and OS-CFAR to get a better detection performance. In a homogeneous background, the mathematical medals of the two new CFAR detectors are derived and their performance has been evaluated and compared with that of CA-CFAR and OS-CFAR.
Read moreA fast and slow time combined CFAR detection algorithm used in through-the-wall radar
Constant false alarm rate (CFAR) detection has been widely used in through-the-wall radar. However, there is a low probability of detection for transverse motion when using the CFAR detection in the slow time dimension; while it is easy to misjudge fixed targets with strong reflection to moving targets when CFAR detection used in the fast time dimension, due to the presence of residual clutter suppression. Aimed at the above problems, this paper proposes a kind of one dimension CFAR detection algorithm combined with fast and slow time. Experiments turn out that the algorithm can well solve the problems of low detection probability of traverse movement in the slow time CFAR detection and the false alarm of strong reflection targets in the fast time CFAR detection. The algorithm has the merits of small amount of computation, simple operation and strong environment adaptability.
Read more