A new atlas for 8-bar kinematic chains with up to 3 prismatic pairs using Joint Sorting Code

Over the last six decades, kinematicians have devised many tests for the identification of isomorphism among kinematic chains (KCs) with revolute pairs. But when it comes to KCs with prismatic pairs, tests are woefully absent and the age-old method of visual inspection is being resorted to even today. This void is all the more conspicuous because sliders are present in all kinds of machinery like quick-return motion mechanism, Davis steering gear, trench hoe, etc. The reason for this unfortunate avoidance is the difficulty in discriminating between sliding and revolute pairs in the link–link adjacency matrix, a popular starting point for many methods. This paper attempts to overcome this obstacle by (i) using joint–joint adjacency, (ii) labeling the revolute pairs first, followed by the sliding pairs, and (iii) observing whether an element of the adjacency matrix belongs to revolute–revolute (RR), revolute–prismatic (RP) (or PR), or prismatic–prismatic (PP) zone, where R and P stand for revolute and prismatic joints, respectively. A procedure similar to hamming number technique is applied on the adjacency matrix but each hamming number is now split into three components, so as to yield the split hamming string (SHS). It is proposed in this paper that the SHS is a reliable and simple test for isomorphism among KCs with prismatic pairs. Using a computer program in python, this method has been applied successfully on a single degree-of-freedom (DOF) simple-jointed planar six-bar chains (up to all possible seven prismatic pairs) and eight-bar KCs (up to all ten prismatic pairs). For six-bar chains, the total number of distinct chains obtained was 94 with 47 each for Watt and Stephenson lineages. For eight-bar chains, the total number is 7167 with the distinct chain count and the corresponding link assortment in parenthesis as 3780(0-4-4), 3037(1-2-5), and 350(2-0-6). Placing all these distinct KCs in a descending order based on SHS can substantially simplify communication during referencing, storing, and retrieving.

The family of planar kinematic chains with two multiple joints

Constrained motion interpolation for planar open kinematic chains

In a kinematic chain, the links are connected to each other through joints. The connectivity of a joint indicates the number of joints to which it is connected. The connectivity level of a joint indicates the distance by which it is separated from the adjacent joints. The concept of joint connectivity and its application to detect isomorphism among kinematic chains and their inversions has been already reported by authors. The method utilizes the connectivity of joints at different levels to detect isomorphism and inversions among planar kinematic chains. The method is applied to eight-, nine-, and ten-link planar kinematic chains. The results so obtained are in agreement with those available in the literature. In this study, the method is further improved by incorporating the type of joint to make it more effective for the detection of isomorphism and distinct inversions. A joint connectivity table completely representing the kinematic chain is proposed. The application of the method is extended for the determination of additional topological characteristics of chains such as categorization of kinematic chains and selection of preferred frame, input and output links for function and path generation. The concept of ‘Motion Transfer Ability’ is introduced and utilized to develop numerical measures for comparing and categorizing the chains at the synthesis stage of mechanism design for a specific application. The method was successfully tested on planar kinematic chains with single and multiple degrees of freedom and the results for eight- and nine-link kinematic chains are appended.

A new matrix, called the joint-joint relation matrix, is defined for representing the structure of a kinematic chain. An algorithm has been developed for deriving the joint-joint distance matrix of a kinematic chain from its joint-joint relation matrix with the help of the computer. A new structural invariant, called the Arranged Sequence of Total Distance Ranks of all the Joints, and based on the concept of distance, has been developed for a kinematic chain, leading to the development of a simple methodology for detecting isomorphism among planar kinematic chains with simple joints.

Abstract. This paper proposes a 4–5R rolling mechanism based on the spatial extension design of a planar 6R single-loop chain. By analyzing the locomotion of the planar equivalent form, a modular gait theory integrating different modes of gait with high efficiency, low energy consumption, and high speed is established. A unified kinematic strategy expression, encapsulated in the form of the gait period table, is tailored for the kinematic chain's gait on the flat terrain. A contrast gait is conducted to ascertain its velocity parameters and volatility of the center of mass (CM). By optimizing the corresponding indicators, two distinct gait patterns are achieved: a faster speed gait that prioritizes increased speed and a steady gait that emphasizes stability with reduced CM volatility. Drawing from the mobility analysis and simulation outcomes of the planar 6R single-loop kinematic chain, a theory of locomotion for a closed-chain linkage mechanism in space is proposed. A locomotion strategy on the flat ground is derived, and a unified evaluation index is proposed. Finally, the feasibility of the two working modes is verified using a physical prototype. The theoretical work in this paper simplifies the design process of closed-chain linkage robots and improves the mobility performance of closed-chain linkage robots. It lays the foundation for researching new types of closed-chain linkage robots.

It is of great importance in the conceptual creative design of mechanical systems to synthesize as many feasible kinematic structures of mechanisms as possible. However, the methods for the structural synthesis of multiple joint kinematic chains are seldom addressed in literature even though they are widely used in various mechanical products. This paper proposes an automatic method to synthesize planar multiple joint kinematic chains. First, the bicolor topological graph and the bicolor contracted graph are introduced to represent the topological structures of multiple joint kinematic chains. Then, the characteristic number string of bicolor topological graphs is proposed and used to efficiently detect isomorphism in the synthesis progress. Finally, a systematic method for the synthesis of kinematic chains with one multiple joint is proposed, and the whole families of multiple joint kinematic chains with up to 16 links and all possible degrees of freedom are synthesized for the first time.

Our goal is to present a general approach for the planar chains with rotational links with clearances.This approach is realized in a multibody style, the main problem being the determination of the matrix of constraints.IntroductionThe application of the multibody type methods [1-13], made possible the elaboration of certain general algorithms for the numerical, dynamical and elasto-dynamical calculation of the kinematical and dynamical parameters for the mechanical systems' motions.These algorithms can be applied both to the determined kinematical mechanical systems with and without friction [4,9,14], respectively with one degree of mobility, and to the systems with one degree of mobility and a single motor element as, for instance, [2,7,12], the mechanical convertor of torque created by G. Constantinescu.The applications of the multibody type methods for the studying of the planar mechanical systems having articulations with clearances (rotational kinematical joints) [3,4,6,10,14], assumes the inserting of certain virtual without mass elements, which leads to singular matrix of inertia and, consequently, it does not permit the separation of the general system of equations in two systems from which result, in order, the time history of the reactions and then the time history of the kinematical parameters.In this paper we elaborate a multibody type method based on a new form of the matrix of constraints, method that permits the numerical dynamical study of the planar systems with rotational joints with or without clearance, with one or several degrees of freedom.

In this paper, a new method is proposed for structural synthesis of planar closed kinematic chains with all the possible kinds of multiple joints according to given number K-independent loops up to maximum multiple joint factor Vmax(K). At first, the new procedure for structural synthesis of non-fractionated and fractionated multiple joint kinematic chains based on the combination of corresponding simple and multiple joints is presented. Then the atlas database with all the possible kinds of multiple joints containing various 24 (case K = 4) multiple joint non-fractionated and fractionated structures is established and illustrated. Next, all the possible multiple joint assortments ([M.J.A.]) for non-fractionated as well as fractionated 10-link 1-DOF multiple joint kinematic chains with up to pentagonal links with K = 4 and up to Vmax = 6 are synthesized and separated for the first time. Finally, the complete structural analysis of multiple joint kinematic chains for industrial application in 10-link manipulators designed from the atlas of synthesized multiple joint kinematic chains is conducted.

A number of distinct or non-isomorphic kinematic chains exist for a specified number of links and joints. For example, sixteen distinct chains can be obtained with eight links and two hundred and thirty chains with ten links having a single degree of freedom. Similarly, many space mechanisms can be formed with four links and joints having different degrees of freedom. So far no measure is available to know which of these possesses greater mobility or flexibility. Flexibility is not to be confused with the degree of freedom. Intuitively one feels that a six-link chain has greater flexibility than a four-bar chain both having the same degrees of freedom. Though the mobility of a chain increases with the number of links one is not sure how the structural arrangement, type of links and joints, their numbers and sequence etc. influence the same. Combining graph theory with the concepts of probability, simple formulae are developed to investigate the relative merits of spatial and planar kinematic chains. The greater the flexibility or mobility of the chain, the higher is the ability to meet the motion requirements, i.e., a chain having greater entropy can be expected, say, to reproduce a given function more accurately.

In this paper, a new structural design method based on MATLAB is developed for the configuration design and optimization of real-life planar manipulators in the high-speed press line. To explore planar manipulators with better performance, the developed method provides a suite of analysis procedures including demonstrating structural synthesis in graph theory, building conversion relations between different models, and generating new configurations of the planar manipulator. In the structural synthesis, the whole family of non-isomorphism planar 8-link kinematic chains with up to 3 prismatic pairs is generated, which lays a solid foundation for the generation of new configurations of planar manipulators. Under the expected requirements and constraints, the original planar manipulator is compared with new planar manipulators in which the developed method. The result shows that the developed method of task-driven structural synthesis is effective in generating configurations of planar manipulators and enriches related research of structural design and optimization in the field.

The 3-PS structure features one rigid body (platform) connected to another rigid body (base) by means of three kinematic chains (limbs) of type PS (P and S stand for prismatic pair and spherical pair, respectively). All the 3-degree-of-freedom parallel manipulators with three connectivity-5 limbs, each one constituted of one passive (i.e. not actuated) prismatic pair, one passive spherical pair and one actuated kinematic pair of any type, become 3-PS structures when the actuated pairs are locked. Direct kinematics of this class of manipulators is tied to the properties of the 3-PS structure. In particular, the direct position analysis is tied to the assembly modes of the 3-PS structure; whereas the determination of the singularities of the direct instantaneous problem is tied to the determination of the singular geometries of the 3-PS structure, where instantaneous relative motions between platform and base are possible. The solution of these two problems is necessary both for designing the manipulators and for controlling them during motion. This paper deal with the determination of the singular geometries of the 3-PS structure.

The complete set of 12-bar planar simple-jointed kinematic chains is enumerated using the stratified or hierarchical representation, of Fang and Freudenstien (1990) in which post-priori isomorphism testing is not needed. This is achieved by directly enumerating the simplified and contracted graphs from which the kinematic chains are built up. The number obtained is compared with those from previous studies, and the list is catagorized by the link sets and by the numbers of major vertices and edges in the simplified graphs. A major feature of the technique is the use of an efficient rote-based technique for eliminating degenerate chains.

The structural synthesis of Baranov trusses is an open problem even though it finds its wide usage in design and analysis of mechanisms and robotics. A Baranov truss is a planar zero DOF kinematic chain, which contains no rigid subchains. The present work aims at synthesising the complete collection of N - link Baranov trusses by adding a binary link to (N – 1) - link, 1 degree of freedom (DoF) simple jointed kinematic chains. From this collection, chains which contain degenerate sub-chains are identified and removed as they are not Baranov truss by definition. Next, an isomorphism test is carried out to identify distinct chains and resulting complete collection of N-link Baranov trusses is reported.

Eliminating isomorphism identification method for synthesizing nonfractionated kinematic chains based on graph similarity