A new blind image source separation algorithm based on feedback sparse component analysis

Blind single-channel source separation is a long-standing machine learning and signal processing problem. Traditional blind source separation (BSS) algorithms were proposed to solve this task utilizing multiple signal constraints. Generative adversarial network (GAN) are free from statistical constraints and samples, but the role of adversarial training in the task of BSS has not been fully demonstrated. Therefore, a new separation network model that enables to learn the known separated signal distribution from the stepwise fine estimation of the unknown mixture distribution was presented in this paper, and a self-attention mechanism was introduced to solve the problem of the blurring details of the generated image by the generator which preserves image details in the process of image separation. Compared with the existing single-channel blind source separation algorithm based on generative adversarial network-neural egg separation (NES), the detailed information of this new separation algorithm is more prominent, and the source signal in the mixed image has been separated more effectively, and has better separation performance than the classic blind source separation algorithms.

In the recent past, blind source separation (BSS) algorithms using multivariate statistical data analysis technique have been successfully used for source identification and separation in the field of biomedical and statistical signal processing. Recently numbers of different BSS techniques have been developed. With BSS methods being the feasible method for source separation and decomposition of biosignals, it is important to compare the different techniques and determine the most suitable method for the applications. This paper presents the performance of five BSS algorithms (SOBI, TDSEP, FastICA, JADE and Infomax) for decomposition of sEMG to identify subtle finger movements. It is observed that BSS algorithms based on second-order statistics (SOBI and TDSEP) gives better performance compared to algorithms based on higher-order statistics (FastICA, JADE and infomax).

Most algorithms for blind source separation (BSS) or independent component analysis (ICA) assume an equal number of sources as sensors. For multichannel electrophysiological recordings, such as the electroencephalogram (EEG), however, there are often far fewer sources of neurophysiologically relevant activity than the number of sensors. This adds a model order estimation problem to the source separation problem. Conventional estimates of the number of sources are based on the dominant eigenvalues of the data covariance matrix, obtained from principal component analysis (PCA), whose corresponding eigenvectors are also used for prewhitening. It is well known that PCA is susceptible to noise, leading to incorrect model order estimates and data distortion, which in turn limit the accuracy of the source estimates. It is therefore highly desirable to determine the correct number of sources and their spatial topographies directly, without PCA-based data truncation or prewhitening. In this work, we present a stepwise BSS method for extracting only the sources necessary for a sufficiently good least-square fit to the data. This simultaneously yields model order and source estimates, which we examine at different noise levels. We also show how only a few neurophysiologically meaningful components can be extracted from 25-channel ictal EEG.

We propose a new algorithm for blind source separation (BSS), in which independent component analysis (ICA) and beamforming are combined to resolve the low-convergence problem through optimization in ICA. The proposed method consists of the following three parts: (1) frequency-domain ICA with direction-of-arrival (DOA) estimation; (2) null beamforming based on the estimated DOA; (3) integration of (1) and (2) based on the algorithm diversity in both iteration and frequency domain. The inverse of the mixing matrix obtained by ICA is temporally substituted by the matrix based on null beamforming through iterative optimization, and the temporal alternation between ICA and beamforming can realize fast- and high-convergence optimization. The results of the signal separation experiments reveal that the signal separation performance of the proposed algorithm is superior to that of the conventional ICA-based BSS method, even under reverberant conditions.

Blind Source Separation (BSS) algorithms based on the noise-free model are not applicable when the Signal Noise Ratio (SNR) is low. In view of this situation, our solution is to denoise the mixtures with additive white Gaussian noise firstly, and then use BSS algorithms. This paper proposes a piecewise Empirical Mode Decomposition (EMD) thresholding approach to denoise mixtures with strong noise. This approach can distinguish the noise-dominated IMFs and signal-dominated IMFs, and then respectively apply different thresholdings methods. Simulation results show that compared with the Wavelet denoising, the proposed approach has a better denoising performance, and can remarkably enhance the separation performance of BSS algorithms, especially when the signal SNR is low.

Blind source separation (BSS) algorithms are often categorized as either narrowband or broadband algorithms depending on whether their respective cost functions aim at individual DFT bins or the entire broadband signal. In this contribution, we present comparable general natural gradient-based formulations of both concepts based on the TRINICON framework. As a distinctive feature, narrowband algorithms imply an internal permutation and scaling problem. We show that the common DOA estimation-based methods for aligning the permutations effectively rely on geometric a-priori knowledge, and we explain why they need to be complemented by additional repair mechanisms for robust BSS. The latter can already be viewed as approximations of the generic TRINICON broadband algorithm. As a conclusion, we propose to always use a generic broadband algorithm as a starting point for the design of new BSS algorithms.

This letter proposes a novel method of a highly secured time domain cryptosystem to provide security for mobile voice calls. Using a modified version of blind source separation (BSS) algorithms, the proposed cryptosystem provides a complete solution for highly secured communications between the two ends of any voice call without the need for modifying the existing mobile network infrastructure. Moreover, this system can be easily connected to any type of mobile equipment. To overcome the bandwidth expansion usually associated with BSS algorithms, the proposed system uses a modified key generation process to limit the bandwidth occupied by the encrypted speech signal. Evaluation of the modified encryption and decryption algorithms proved the validity of these changes for speech signals in terms of signal to noise ratio and residual intelligibility.

A frequently encountered problem in signal processing is harmonic retrieval in additive colored Gaussian or non-Gaussian noise, especially when the frequencies of the harmonic signals are very close in space. The purpose of this paper is to develop an efficient Blind Source Separation (BSS) algorithm from linear mixtures of source signals, which enables to separate harmonic source signals using only one observed channel signal even if the frequencies of the harmonic signals are closely spaced. First, we establish the BSS based harmonic retrieval model in additive noise by using the only one observed channel, and analyze the fundamental principle by utilizing BSS method to retrieve harmonics. Then, we propose a BSS-based approach to the harmonic retrieval by resorting the concept of W-disjoint orthogonality in the over-complete BSS situation, and as a result, we get the separation algorithm using only one channel mixed signals. Simulation results show that the proposed separation algorithm-BSS-HR is able to separate the harmonic source signals.

This paper describes a novel modification to the well-known natural gradient or INFOMAX algorithm for blind source separation that largely mitigates its divergence problems. The modified algorithm imposes an a posteriori scalar gradient constraint that adds little computational complexity to the algorithm and exhibits fast convergence and excellent performance for fixed step size values that are largely independent of input signal magnitudes and initial separation matrix estimates. Evaluation of the approach for the separation of instantaneous and convolutive source mixtures using both time- and frequency-domain implementations shows its excellent separation behavior.

This work presents the application of Blind Source Separation (BSS) Algorithms on Dual-band IR Spectrogram for breast cancer detection and tracing the effect of long-term chemotherapy for breast-cancer patients. We take Dual-band IR Spectrogram's RAW Data as an input to the BSS algorithms. Integrated into the back-end processor of a Dual-band IR Sensor and Readout Circuit Platform, our Improved Neighbor-based BSS algorithm operated on Dual-band IR Spectrogram provides a better breast cancer detection. Considering the demarcating degree, our Improved Neighbor-based BSS algorithm is approximately 15% better than other algorithms. As to the correctness rate, our improved algorithm approximately increases 10% compared with other algorithms.

The independent component analysis (ICA) in blind source separation (BSS) is introduced. A fast ICA algorithm is proposed. In contrast to most blind source separation algorithms, the method does not need to calculate higher order statistics. A pre-whitening procedure is performed to de-correlate the sensor signals before extracting vectors. The proposed method is used to remove the ECG artifacts from clinical ECG signals successfully.

With the increasing construction of high-voltage substation, the distance between resident area and substation is getting closer. Noise of substations has been an unavoidable problem which can be controlled better by analyzing it. Otherwise, the operational conditions of equipment in substation can be predicted by comparing the measured noise signals with the signals during normal operation. Corona noise emitted by high voltage transmission line, environmental quasi-stationary noise and noumenon noise generated by electric appliances are three main types of the noise signals in the substation which can't be measured independently by traditional methods. An Underdetermined Blind Source Separation (UBSS) algorithm based on the Sparse Component Analysis (SCA) was proposed to separate the mixed 220kV substation noise in this paper which can be applied to overcome the shortage of Independent Component Analysis (ICA). The feasibility of the algorithm was verified in the simulation and the experiment before using it to separate the substation noise. An approach to feature extraction based on the wavelet modulus maxima was employed to analyze the separated noise. All the results show that SCA can separat mixed substation noise efficiently.

It is inevitable that measured signals are contaminated with noise when MEMS sensor is used for an outdoor measurement. So the obtained signals need noise elimination, which is one of key technologies for signal conditioning. In this paper, a novel noise elimination method based on algorithm of blind source separation (BSS) for MEMS sensor is proposed to separate the source signals from the mixed signals with noises. The BSS algorithm based on maximum signal noise ratio (SNR) is a method of global optimal property, using the characteristic that SNR is maximal when statistically independent source signals are completely separated.The algorithm has a low computational complexity for instantaneous linear mixture signals. It is effective to acquire the source signals from the mixed signals with noises obtained by MEMS sensor,and is successfully verified by simulation experiment of BSS algorithm.The result of noise elimination experiment has achieved signal conditioning and eliminates ambient noises for MEMS sensor signals.

The question of how to separate individual brain and non-brain signals, mixed by volume conduction in electroencephalographic (EEG) and other electrophysiological recordings, is a significant problem in contemporary neuroscience. This study proposes and evaluates a novel EEG Blind Source Separation (BSS) algorithm based on a weak exclusion principle (WEP). The chief point in which it differs from most previous EEG BSS algorithms is that the proposed algorithm is not based upon the hypothesis that the sources are statistically independent. Our first step was to investigate algorithm performance on simulated signals which have ground truth. The purpose of this simulation is to illustrate the proposed algorithm's efficacy. The results show that the proposed algorithm has good separation performance. Then, we used the proposed algorithm to separate real EEG signals from a memory study using a revised version of Sternberg Task. The results show that the proposed algorithm can effectively separate the non-brain and brain sources.

We propose a new algorithm for blind source separation (BSS), in which independent component analysis (ICA) and beamforming are combined to resolve the low-convergence problem through optimization in ICA. The proposed method consists of the following three parts: (1) frequency-domain ICA with direction-of-arrival (DOA) estimation, (2) null beamforming based on the estimated DOA, and (3) integration of (1) and (2) based on the algorithm diversity in both iteration and frequency domain. The inverse of the mixing matrix obtained by ICA is temporally substituted by the matrix based on null beamforming through iterative optimization, and the temporal alternation between ICA and beamforming can realize fast- and high-convergence optimization. The results of the signal separation experiments reveal that the signal separation performance of the proposed algorithm is superior to that of the conventional ICA-based BSS method, even under reverberant conditions.