A New Ore Grade Estimation Using Combine Machine Learning Algorithms

Microwave pyrolysis of oil palm fibre (OPF) was conducted to study the effect of microwave power, temperature, and nitrogen (N2) flow rate on the production of hydrogen and biochar. The effect of microwave power ranging from 400 to 900 W, reaction temperatures ranging from 450°C to 700°C, and N2 flow rates ranging 200 to 1,200 cm3 min−1 were investigated. The microwave power, reaction temperature, and N2 flow rates are directly proportional to hydrogen and inversely proportional to biochar yield. The characteristics of the biochar were analysed using CHNOS, scanning electron microscopy, and Brunauer–Emmett–Teller results. Central composite design was used to optimize the number of experiment. The optimized experimental datasets were used as inputs for developing a model that can predict the weight of hydrogen and biochar from microwave pyrolysis of OPF. A multilayer feedforward neural network model was developed by comparing the performance of 11 different types of backpropagation training algorithms. The 11 training algorithms belong to six classes, which are (a) additive momentum, (b) self‐adaptive learning rate, (c) resilient backpropagation, (d) conjugate gradient, (e) quasi‐Newton, and (f) Bayesian regulation (BR). Best performing training algorithm was selected based on the lowest error values computed. The objective of this research is to identify the most suitable training algorithm for this process. Levenberg–Marquardt and BR exhibited very good performance. BR exhibited best performance with lowest error values in predicting weight of hydrogen and biochar. The testing data error values for hydrogen weight is 0.216 root mean square error (RMSE), 0.144 mean absolute error (MAE), and 0.020 mean absolute percentage error (MAPE), and biochar is 0.886 RMSE, 0.489 MAE, and 0.019 MAPE. The optimum number of hidden neuron for this algorithm is 19 with mean square error 0.23. The biochar exhibits porous structure suggesting possible land application.

Predictions for short-term traffic volume provide important inputs for traveler information and traffic management. Traffic volumes in the near future are often estimated based on historical volumes. Because of the complicated nonlinear relationship between historical and future traffic volume data, many previous studies used neural networks to predict short-term traffic volumes. In this research, a v-support vector machine (v-SVM) model, which has the particular strength of overcoming local minima and overfitting common to neural network models, is proposed for short-term traffic volume prediction. The v-SVM model is compared with a widely used multilayer feed-forward neural network (MLFNN) model using four data sets collected from three interstate freeways. Testing results show that for both one-step and two-step forecasting, the v-SVM model outperforms the MLFNN model for all data sets in terms of mean absolute percentage error and root-mean-square error. Key issues in applying both models are also discussed in this article.

The energy of coal is expressed by its useful heat value (UHV), and it is the major key player in coal pricing. The objectives of this paper are to obtain (a) the regression relationship between coal proximate parameters and UHVs, and (b) multilayered feed forward neural network (MLFN) models between geophysical log responses and UHVs. Six wells are used for training the networks, and three wells are used for validating the obtained results in the Bishrampur coalfield. The mean square error (MSE) of MLFN models along with correlation (R2) values at their training, validation, and testing stages are the criteria for selecting the best model for estimation of coal proximate parameters and UHVs using geophysical log responses. The final model is selected based on low MSE (≤0.07) and high R2 values (≥0.80) at training, validation, and testing stages. The predicted UHV obtained from the best MLFN model has excellent correlation (R2 = 0.98) with the laboratory determined UHVs of three major coal seams. The pred...

Bulk density miscalculations and subsequent reporting can produce resource estimation errors and unexpected financial outcomes. Density and bulk density vary throughout a mineral deposit, especially in porous deposits and deposits containing variable amounts of high-density minerals (e.g., barite). Resource estimators must correlate bulk density with core recovery and apply quality assurance/quality control analysis to bulk density data. Core recovery is an important factor in resource estimation and reporting. Block tonnages (ore and waste) are estimated from volumes using a dry bulk density value. Ore dilution is a volumetric effect integral to ore reserve estimation that also has the potential to affect the economics of mining a deposit. Both the bulk density and dilution problems could be overcome by reporting a mineral resource estimate in grade per unit volume.

Mineral resources are estimated to establish potential orebody with acceptable quality (grade) and quantity (tonnage) to validate investment. Estimating mineral resources is associated with uncertainty from sampling, geological heterogeneity, shortage of knowledge and application of mathematical models at sampled and unsampled locations. The uncertainty causes overestimation or underestimation of mineral deposit quality and/or quantity, affecting the anticipated value of a mining project. Therefore, uncertainty is assessed to avoid any likely risks, establish areas more prone to uncertainty and allocate resources to scale down potential consequences. Kriging, probabilistic, geostatistical simulation and machine learning methods are used to estimate mineral resources and assess uncertainty, and their applicability depends on deposit characteristics, amount of data available and expertise of technical personnel. These methods are scattered in the literature making them challenging to access when needed for uncertainty quantification. Therefore, this review aims to compile information about uncertainties in mineral resource estimation scatted in the literature and develop a knowledge base of methodologies for uncertainty quantification. In addition, mineral resource estimation comprises different interdependent steps, in and through which uncertainty accumulates and propagates toward the final estimate. Hence, this review demonstrates stepwise uncertainty propagation and assessment through various phases of the estimation process. This can broaden knowledge about mineral resource estimation and uncertainty assessment in each step and increase the accuracy of mineral resource estimates and mining project viability.

In this paper, extensive study of ring-opening polymerization ε-caprolactone (ε-CL) using lipase Novozym 435 as catalyst in flask level and reactor level were conducted. The polymerization rates increase with an increase in time up to 4 h after which there has been a steep decrease for all temperature from 50 to 100 °C in the flask level. The conclusion out of flask level and reactor level study is that a uniform trend is obtained at 70 °C. A multilayer feed-forward neural network (FANN) model was trained with an error back-propagation algorithm. Reaction time, temperature were used as the input parameters and molecular weight is the output for the flask level study where as reactor impeller speed was also included for reactor level study. Two FANN models with modeling performances of 2-10-1 in the flask level and 3-9-1 FANN1 and 2-13-1 FANN2 (excluding reactor impeller speed) for the reactor level study were obtained.

The purpose of this study is to develop a feed-forward neural network (FFNN) model with back-propagation learning algorithm to predict the dissolved oxygen from water temperature and 5 days-biological oxygen demand in the Tigris River, Baghdad-Iraq. The Artificial Neural Networks model was implemented utilizing measured data that were gathered from laboratories of water treatment plant, Baghdad-Iraq, during the year 2008. The correlation analysis between dissolved oxygen and dependent parameters were utilized in selecting the major inputs from water quality parameters for commencing of ANN models. The performance of ANN models were tested utilizing the coefficient of correlation (R), the efficiency coefficient of Nash-Sutcliffe (NS), mean square error (MSE) and mean absolute errors (MAE). The outputs revealed that the feed-forward neural networks using back-propagation learning algorithm which was prepared by temperature and biological oxygen demand offered a relatively high correlation coefficient of 0.885, and efficiency coefficient of 0.782, meanwhile a reasonably low mean square errors of 1.133, and mean absolute errors of 0.369 values for whole array period. The results of the present study demonstrate that the artificial neural networks using FFNN model is capable to forecast the dissolved oxygen values with acceptable accuracy. This is suggesting that the artificial neural network is a useful tool for Tigris River management in Baghdad-Iraq.

Natural compounds found in mangosteen peel such as squalene and α-cubebene were proven to exhibit antimicrobial, antibacterial and anticancer activity for cancer disease treatment. Supercritical Carbon Dioxide (SC-CO2) extraction process was conducted at constant flowrate of 24 mL/min within 40 minutes and by varying temperature and pressure from 50 to 80°C and from 34.5 to 55.1 MPa, respectively. A multi-layer feedforward back-propagation Artificial Neural Network (ANN) model was developed for solubility prediction of mangosteen peel oil in SC-CO2, where input variables were temperature and pressure. An optimal ANN model consisted of one hidden layer and five neurons was obtained with minimum value of Mean Square Error (MSE) i.e. 0.011 for 48 experimental data point used. The analysis showed that the ANN prediction model have a good correlation with the experimental data in which the values of correlation coefficient (R-value) for training, validating and testing obtained are 0.933, 0.982 and 0.927 proceedings.

The research investigated the spatial distribution of air quality in Peninsular Malaysia to offer crucial insights for mitigating air quality degradation. Utilizing historical data obtained from the Malaysian Department of Environment, eleven years' worth (2011-2021) of daily readings of PM10, O3 , SO2 , NO2 , and CO from thirty-four monitoring stations were subjected to environmetric techniques and Artificial Neural Network analysis. HACA successfully classified seven stations into the High Pollution Cluster (HPC), seven stations into the Moderate Pollution Cluster (MPC), and twenty stations into the Low Pollution Cluster (LPC). The discriminant analysis demonstrated a correct assignment rate of 91.87%, suggesting that all five parameters were able to discriminate with a significance level of p<0.0001. Principal Component Analysis (PCA) revealed two Variance Factors (VFs) across all clusters, with cumulative variances of 69.43% (HPC), 82.32% (MPC), and 62.16% (LPC) respectively. Furthermore, employing a Multi-Layer Perceptron Feed-Forward Artificial Neural Network (MLP-FF-ANN) model to predict API readings yielded a significant and strong correlation, as indicated by R2 =0.7774 and RMSE=9.9048. These findings hold significant potential in informing the adoption of effective preventative and management strategies.

Statistical modeling of nuclear data provides a novel approach to nuclear systematics complementary to established theoretical and phenomenological approaches based on quantum theory. Continuing previous studies in which global statistical modeling is pursued within the general framework of machine learning theory, we implement advances in training algorithms designed to improved generalization, in application to the problem of reproducing and predicting the halflives of nuclear ground states that decay 100% by the beta^- mode. More specifically, fully-connected, multilayer feedforward artificial neural network models are developed using the Levenberg-Marquardt optimization algorithm together with Bayesian regularization and cross-validation. The predictive performance of models emerging from extensive computer experiments is compared with that of traditional microscopic and phenomenological models as well as with the performance of other learning systems, including earlier neural network models as well as the support vector machines recently applied to the same problem. In discussing the results, emphasis is placed on predictions for nuclei that are far from the stability line, and especially those involved in the r-process nucleosynthesis. It is found that the new statistical models can match or even surpass the predictive performance of conventional models for beta-decay systematics and accordingly should provide a valuable additional tool for exploring the expanding nuclear landscape.

<div class="section abstract"><div class="htmlview paragraph">Heat treated cast aluminum components like engine blocks and cylinder heads can develop significant amount of residual stress and distortion particularly with water quench. To incorporate the influence of residual stress and distortion in cast aluminum product design, a rapid simulation approach has been developed based on artificial neural network and component geometry characteristics. Multilayer feed-forward artificial neural network (ANN) models were trained and verified using FEA residual stress and distortion predictions together with part geometry information such as curvature, maximum dihedral angle, topologic features including node's neighbors, as well as quench parameters like quench temperature and quench media.</div></div>

The next step of isolated word recognition will be the sentence or continuous speech recognition. In this paper, an algorithm to estimates maximum posterior probabilities from input chhattisgarhi speech has proposed. To compute the accurate and precise maximum likelihoods, one need to extract the features from segmented words accurately. An implemented algorithm for automatic word segmentation gives up to 96.00% of average word boundary detection accuracy. Mel filter cepstral coefficients, delta cepstral and delta-delta cepstral speech characteristics have been extracted from the signals. Automatic segmented words from the speech have added and created a vocabulary. Further, 3-gram language model has implemented to resolve the ambiguity of similar pronunciation of the words. The last stage of the system is to compute maximum log likelihoods and maximum posterior probabilities of the word sequence. The experiments have been carried out on self-recorded 220 continuous chhattisgarhi speech, which consist of 2640 sentences and 330,000 words. We have used multilayer feedforward neural network (MLP) and Hidden markov model (HMM) for maximum likelihood estimation (MLE). The details of experimental analysis have presented in the paper.

This paper presents the development of several multilayer feed-forward artificial neural network (ANN) models aimed at the simulation and parametrization of semiconductor optical amplifiers (SOAs). In the direct approach, it is assumed that the SOA physical parameters are known, and the ANNs can reproduce the results of detailed SOA models up to 20 times faster. In the inverse approach, it is assumed that the SOA is a grey-box with a known model but unknown parameters, and the ANNs infer the SOA model parameters from the input-output data. These results provide efficient surrogate models to represent SOAs in future digital twins for on-line optimization of ultra-wide band transmission systems that employ the SOA as the repeater element.

A Multi-model Approach in Developing an Intelligent Assistant for Diagnosis Recommendation in Clinical Health Systems

The utility of polyamine-based solvent-activators for the possible application in postcombustion CO2 capture technology has drawn considerable attention recently owing to its higher loading capacity as well as superior kinetics. The current work involves a comprehensive experimental cum theoretical investigation on the equilibrium solubility of CO2 pertaining to aqueous N-(3-aminopropyl)-1,3-propanediamine and its blends with N-methyldiethanolamine and 2-amino-2-methyl-1-propanol. The analysis was conducted within the operating temperature and CO2 partial pressure range of 303.2-323.2 K and 2-200 kPa, respectively. Two different mathematical models based on nonrigorous approaches such as equilibrium based modified Kent-Eisenberg (KE) model and a multilayer feedforward neural network model have been developed to correlate the CO2 solubility data over a wide range of experimental conditions. Both the model predictions are well-validated with the experimental results. The reaction scheme as well as the prevalence of important reaction products was further confirmed with qualitative 13C NMR as well as ATR-FTIR analysis. Apart from these some of the important thermally induced transport properties viz, density, viscosity, and surface tension of the aqueous single and blended systems were measured and correlated with various consistent empirical models such as Redlich-Kister and Grunberg-Nissan model while surface tension data are modeled using temperature-based multiple linear regression technique.