A New Segmentation Method of Synthetic Aperture Radar Image Based on Support Vector Machine

Compressed sensing (CS) is currently utilized in the application of Synthetic Aperture Radar (SAR) imaging. Unfortunately, the CS SAR imaging performance degrades as SNR decreases. However, there exists a denoising convolutional neural network (DnCNN) based on 2D convolution (DnCNN-2D) in the field of image denoising. Traditional DnCNN-2D is not directly applicable to SAR imaging. Thus, a DnCNN based on 1D convolution (DnCNN-1D) for signal denoising is proposed and employed to denoise the SAR signal. The denoised SAR signal is subsequently utilized for CS SAR imaging. Each convolutional layer of DnCNN-1D has a fixed number and fixed size of filters and activation functions. The residual learning strategy and batch normalization are adopted in the DnCNN-1D. The segmental signal-to-noise ratio (SEGSNR) and the normalized mean square error (NMSE) are selected to evaluate signal denoising and SAR imaging performance, respectively. The experimental results indicate that imaging performance is significantly improved after denoising the SAR signal by the proposed method.

The application of high-resolution synthetic aperture radar (SAR) images from aerial and satellite sensors challenges the researchers for new and effective interpretation tools. Although most of the main axes in the road network may be detected by a skilled human observer looking for dark or bright linear structures, automatic detection remains a difficult task. In this paper, we proposed a new simple approach to extract main road network in high-resolution SAR images automatically. The approach is based on three steps. The first step is pre-filtering the initial SAR images by using a two-way thresholding process in order to discard uninteresting parts of image. In the second step, the results of the first step are input and use the Hough transform to identify the roads respectively. The last step is based on a feature fusion technique. The road networks detected are combined with the fusion operators. We show the improved results from some examples. It is proved that this approach is effective for the straight highways in high-resolution images

The classification of high-resolution (HR) synthetic aperture radar (SAR) images is of great importance for SAR scene interpretation and application. However, the presence of intricate spatial structural patterns and complex statistical nature makes SAR image classification a challenging task, especially in the case of limited labeled SAR data. This paper proposes a novel HR SAR image classification method, using a multi-scale deep feature fusion network and covariance pooling manifold network (MFFN-CPMN). MFFN-CPMN combines the advantages of local spatial features and global statistical properties and considers the multi-feature information fusion of SAR images in representation learning. First, we propose a Gabor-filtering-based multi-scale feature fusion network (MFFN) to capture the spatial pattern and get the discriminative features of SAR images. The MFFN belongs to a deep convolutional neural network (CNN). To make full use of a large amount of unlabeled data, the weights of each layer of MFFN are optimized by unsupervised denoising dual-sparse encoder. Moreover, the feature fusion strategy in MFFN can effectively exploit the complementary information between different levels and different scales. Second, we utilize a covariance pooling manifold network to extract further the global second-order statistics of SAR images over the fusional feature maps. Finally, the obtained covariance descriptor is more distinct for various land covers. Experimental results on four HR SAR images demonstrate the effectiveness of the proposed method and achieve promising results over other related algorithms.

In this paper, we propose a synthetic aperture radar (SAR) image change detection algorithm based on SAR image nonstationary analysis and conditional random field (CRF) model. This algorithm segments the SAR images into two nonstationary regions with the Triplet Markov Field (TMF) model which incorporates a U field to describe the images' nonstationary nature. The combined posterior probability of the CRF model consists of two parts: the unary potential and the pairwise potential. The unary potential is modeled by support vector machine (SVM) using the texture features extracted from the two-temporal SAR images, and the pairwise potential is constructed by the multilevel logistical model to capture the spatial interactions of the log-ratio image. Both the unary and pairwise potentials are improved with the introduction of the U field. The parameters of the pairwise potential are estimated by the iterative conditional estimation (ICE) algorithm. The iterative conditional model (ICM) algorithm is utilized for updating the combined posterior probability, and the final change detection results are obtained when it converges. Finally, experimental results on four two-temporal SAR images validate the effectiveness of the proposed image change detection algorithm.

Oceanic internal waves play a crucial role in ocean activities. Currently, the approach to detecting oceanic internal waves from synthetic aperture radar (SAR) images is becoming robust. To efficiently identify the stripes of oceanic internal waves from SAR images, we propose an integrated algorithm for the detection and recognition of oceanic internal waves. First, the Gamma Map filtering method was adopted to reduce speckle noise in the SAR images. Then, histogram of orientated gradients (HOG), Grey level co-occurrence matrix (GLCM), and fractal dimension (FD) were utilized to extract the image features. Subsequently, support vector machine (SVM) was adopted to classify the SAR images and obtain images that contain oceanic internal waves. Next, the Canny edge detection method was used to detect and recognize the stripes of oceanic internal waves in the SAR images, and these stripes were screened by three parameters, namely their lengths, area ratios, and directions. Finally, the positions of the stripes of the oceanic internal waves were obtained. The experimental results verify that the proposed method can identify whether SAR images contain oceanic internal waves, and also determine the locations of their stripes in the SAR images. Meanwhile, the algorithm exhibits reasonable robustness and recognition rate. In addition, the optimal accuracy and kappa coefficient () are 94.2% and 0.878, respectively.

Change detection is one of the fundamental applications of synthetic aperture radar (SAR) images. However, speckle noise presented in SAR images has a negative effect on change detection, leading to frequent false alarms in the mapping products. In this research, a novel two-phase object-based deep learning approach is proposed for multi-temporal SAR image change detection. Compared with traditional methods, the proposed approach brings two main innovations. One is to classify all pixels into three categories rather than two categories: unchanged pixels, changed pixels caused by strong speckle (false changes), and changed pixels formed by real terrain variation (real changes). The other is to group neighbouring pixels into superpixel objects such as to exploit local spatial context. Two phases are designed in the methodology: (1) Generate objects based on the simple linear iterative clustering (SLIC) algorithm, and discriminate these objects into changed and unchanged classes using fuzzy c-means (FCM) clustering and a deep PCANet. The prediction of this Phase is the set of changed and unchanged superpixels. (2) Deep learning on the pixel sets over the changed superpixels only, obtained in the first phase, to discriminate real changes from false changes. SLIC is employed again to achieve new superpixels in the second phase. Low rank and sparse decomposition are applied to these new superpixels to suppress speckle noise significantly. A further clustering step is applied to these new superpixels via FCM. A new PCANet is then trained to classify two kinds of changed superpixels to achieve the final change maps. Numerical experiments demonstrate that, compared with benchmark methods, the proposed approach can distinguish real changes from false changes effectively with significantly reduced false alarm rates, and achieve up to 99.71% change detection accuracy using multi-temporal SAR imagery.

Thanks to the availability of large-scale data, deep Convolutional Neural Networks (CNNs) have witnessed success in various applications of computer vision. However, the performance of CNNs on Synthetic Aperture Radar (SAR) image classification is unsatisfactory due to the lack of well-labeled SAR data, as well as the differences in imaging mechanisms between SAR images and optical images. Therefore, this paper addresses the problem of SAR image classification by employing the Generative Adversarial Network (GAN) to produce more labeled SAR data. We propose special GANs for generating SAR images to be used in the training process. First, we incorporate the quadratic operation into the GAN, extending the convolution to make the discriminator better represent the SAR data; second, the statistical characteristics of SAR images are integrated into the GAN to make its value function more reasonable; finally, two types of parallel connected GANs are designed, one of which we call PWGAN, combining the Deep Convolutional GAN (DCGAN) and Wasserstein GAN with Gradient Penalty (WGAN-GP) together in the structure, and the other, which we call CNN-PGAN, applying a pre-trained CNN as a discriminator to the parallel GAN. Both PWGAN and CNN-PGAN consist of a number of discriminators and generators according to the number of target categories. Experimental results on the TerraSAR-X single polarization dataset demonstrate the effectiveness of the proposed method.

In single band and single polarized synthetic aperture radar (SAR) images, the information is limited to intensity and texture only and it is very difficult to interpret such SAR images without any a priori information. For unsupervised classification of SAR images, M-band wavelet decomposition is performed on the SAR image and sub-band selection on the basis of energy levels is applied to improve the classification results since sparse representation of sub-bands degrades the performance of classification. Then, textural features are obtained from selected sub-bands and integrated with intensity features. An adaptive neuro-fuzzy algorithm is used to improve computational efficiency by extracting significant features. K-means classification is performed on the extracted features and land features are labeled. This classification algorithm involves user defined parameters. To remove the user dependency and to obtain maximum achievable classification accuracy, an algorithm is developed in this paper for classification accuracy in terms of the parameters involved in the segmentation process. This is very helpful to develop the automated land-cover monitoring system with SAR, where optimized parameters are to be identified only once and these parameters can be applied to SAR imagery of the same scene obtained year after year. A single band, single polarized SAR image is classified into water, urban and vegetation areas using this method and overall classification accuracy is obtained in the range of 85.92%–93.70% by comparing with ground truth data.

The usage of a hypersonic platform for remote sensing application has promising prospects, especially for hypersonic platform-borne synthetic aperture radar (SAR) imaging. However, the high-speed of hypersonic platform will lead to extreme friction between the platform and air, which will cause the ionization of air. The ionized gas forms the plasma sheath wrapped around the hypersonic platform. The plasma sheath will severely affect the propagation of SAR signal and further affect the SAR imaging. Therefore, hypersonic platform-borne SAR imaging should be studied from a physical perspective. In this paper, hypersonic platform-borne SAR imaging under plasma sheath is analyzed. The SAR signal propagation in plasma sheath is computed using scatter matrix method. The proposed SAR signal model is verified by using a ground experiment system. Moreover, the effect of attenuation caused by plasma sheath on SAR imaging is studied under different SAR parameters and plasma sheath. The result shows that attenuation caused by plasma sheath will degrade the SAR imaging quality and even cause the point and area targets to be submerged into the noise. The real SAR images under plasma sheath also illustrate this phenomenon. Furthermore, by studying imaging results under different SAR and plasma parameters, it can be concluded that the severe degradation of SAR imaging quality appears at condition of high plasma sheath electron density and low SAR carrier frequency. The work in this paper will be beneficial for the study of hypersonic platform-borne SAR imaging and design of hypersonic SAR imaging systems in the future.

This Study proposes the approach for crop classification using the Grey Level Co-occurrence Matrix feature of Synthetic Aperture Radar (SAR) images. The method utilizes the SAR Images acquired by Sentinel 1A SAR Data and extract textural features using GLCM. In this study, we investigate the potential of Grey Level Co-occurrence Matrix (GLCM)-based texture information for horticulture crop classification with SAR images in Kharif and cloud weather condition. A study on Synthetic Aperture Radar (SAR) satellite imagery was conducted in Chhattisgarh with the objective to evaluate the potential of different texture parameters among crop. The SAR data were pre-processed for textural analysis having entire angle and equal distance quantization. The results were categorized among different parameters showing significant variation for horticulture crops for Contrast, Dissimilarity, Homogeneity, ASM, Energy, Entropy and GLCM Mean. The statistical analysis was done for fruit crop along with major kharif crop of study area. The results shows that mean backscatter value was lowest for banana (99.12 dB) and highest for Mango (198.26 dB) regarding contrast textural property in VH Channel whereas mean backscatter value in VH Channel w.r.t to energy was maximum for banana (0.60 dB) followed by papaya (0.49 dB) and guava (0.45 dB) and least for mango (0.44 dB). The mean backscatter value for GLCM mean textural property in VH channel was shown maximum by banana (51.24 dB) followed by papaya (41.96 dB) and mango (32.98 dB). These results indicate the usefulness of texture information for classification of SAR images, particularly when acquisition of optical images is difficult in Kharif and cloud weather condition for crop classification. Thus GLCM feature of SAR Data proven to be significant for the classification of horticulture crops.

This study evaluates the performance of a Support Vector Machine (SVM) classifier to learn and detect changes in single- and multi-temporal X- and L-band Synthetic Aperture Radar (SAR) images under varying conditions. The purpose is to provide guidance on how to train a powerful learning machine for change detection in SAR images and to contribute to a better understanding of potentials and limitations of supervised change detection approaches. This becomes particularly important on the background of a rapidly growing demand for SAR change detection to support rapid situation awareness in case of natural disasters. The application environment of this study thus focuses on detecting changes caused by the 2011 Tohoku earthquake and tsunami disaster, where single polarized TerraSAR-X and ALOS PALSAR intensity images are used as input. An unprecedented reference dataset of more than 18,000 buildings that have been visually inspected by local authorities for damages after the disaster forms a solid statistical population for the performance experiments. Several critical choices commonly made during the training stage of a learning machine are being assessed for their influence on the change detection performance, including sampling approach, location and number of training samples, classification scheme, change feature space and the acquisition dates of the satellite images. Furthermore, the proposed machine learning approach is compared with the widely used change image thresholding. The study concludes that a well-trained and tuned SVM can provide highly accurate change detections that outperform change image thresholding. While good performance is achieved in the binary change detection case, a distinction between multiple change classes in terms of damage grades leads to poor performance in the tested experimental setting. The major drawback of a machine learning approach is related to the high costs of training. The outcomes of this study, however, indicate that given dynamic parameter tuning, feature selection and an appropriate sampling approach, already small training samples (100 samples per class) are sufficient to produce high change detection rates. Moreover, the experiments show a good generalization ability of SVM which allows transfer and reuse of trained learning machines.

Synthetic aperture radar (SAR) image segmentation usually involves two crucial issues: suitable speckle noise removing technique and effective image segmentation methodology. Here, an efficient SAR image segmentation method considering both of the two aspects is presented. As for the first issue, the famous nonlocal mean (NLM) filter is introduced in this study to suppress the multiplicative speckle noise in SAR image. Furthermore, to achieve a higher denoising accuracy, the local neighboring pixels in the searching window are projected into a lower dimensional subspace by principal component analysis (PCA). Thus, the nonlocal mean filter is implemented in the subspace. Afterwards, a multi-objective clustering algorithm is proposed using the principals of artificial immune system (AIS) and kernel-induced distance measures. The multi-objective clustering has been shown to discover the data distribution with different characteristics and the kernel methods can improve its robustness to noise and outliers. Experiments demonstrate that the proposed method is able to partition the SAR image robustly and accurately than the conventional approaches.

In general, synthetic aperture radar (SAR) imaging and image processing are two sequential steps in SAR image processing. Due to the large size of SAR images, most image processing algorithms require image segmentation before processing. However, the existence of speckle noise in SAR images, as well as poor contrast and the uneven distribution of gray values in the same target, make SAR images difficult to segment. In order to facilitate the subsequent processing of SAR images, this paper proposes a new method that combines the back-projection algorithm (BPA) and a first-order gradient operator to enhance the edges of SAR images to overcome image segmentation problems. For complex-valued signals, the gradient operator was applied directly to the imaging process. The experimental results of simulated images and real images validate our proposed method. For the simulated scene, the supervised image segmentation evaluation indexes of our method have more than 1.18%, 11.2% and 11.72% improvement on probabilistic Rand index (PRI), variability index (VI), and global consistency error (GCE). The proposed imaging method will make SAR image segmentation and related applications easier.

Reliable and accurate land use/land cover (LULC) map is a crucial data source for the understanding of coupled human–environment systems, monitoring changes, timely low-cost planning, and management of natural resources. Improvements in sensor technologies and machine learning capabilities have shifted the attention of remote sensing community to data complementarity through fusion of multi-sensor data for accurate feature extraction and mapping. Amalgamation of optical and synthetic aperture radar (SAR) images has shown promising advantages in enhancing the accuracy of extracting LULC as such method allows exploitation of information in sensors. This study investigated the potential of using freely available multisource Sentinel images to extract LULC maps in semi-arid environments through multi-scale geographic object-based image analysis (GEOBIA). A multi-scale classification framework that integrates GEOBIA, correlation-based feature selection (CFS), and random forest (RF)-supervised classification was adopted to extract LULC from assimilation of Sentinel multi-sensor products. First, Sentinel-1 and -2 images were pre-processed. Second, optimum multi-scale segmentation levels were selected using F-score segmentation quality measures. Third, 70 features of various spectral indices and derivatives and geometrical features from optical data and multiple ratios and textural features from dual-polarization SAR images were computed, and a CFS based on wrapper approach was used to select the most significant features at multi-scale levels. Finally, a single and multi-scale RF classifier was used to extract LULC classes using the most relevant features extracted from Sentinel SAR and optical images. Results of multi-scale image segmentation optimization showed that scale parameter (SP) values of 40, 60, and 150 were optimal for extraction of LULC classes. Results of feature selection showed that 22, 24, and 27 features were selected at scale SP values of 40, 60, and 150, respectively. Half of the features were common among the three scales. Single RF classification yielded overall accuracy (OA) values of 92.10%, 93%, and 91% and kappa coefficients of 0.901, 0.912, and 0.89 at scale values of 150, 60, and 40, respectively. Multiscale RF classification from scale values of 150 and 60 produced better LULC classification with OA 96.06% and kappa coefficient of 0.95 compared with other scale SP values. The integrated approach demonstrated an effective and promising method for high-quality LULC extraction from coupling optical and SAR images. Overall, multi-sensor Sentinel images along with the adopted approach feature a remarkable potential for improving LULC extraction and can effectively be used to update geographic information system layers for various applications.

This paper proposes a novel method on Synthetic Aperture Radar (SAR) Image denoising, which is based on context modeling combined with multiscale orthogonal bandlet coefficients. For the main influence of SAR image is multiplicative speckle noise, the logarithm uniform transform is used to convert it to additive noise. In this paper, the multiscale orthogonal bandlet transform is applied to noisy SAR Image. The contextual model is used to compute contextual values of bandlet coefficients on each scale. Therefore, bandlet coefficients are reconstructed into some parts by contextual values. The spatially adaptive soft-threshold (T) is to denoise SAR image in each part. Experimental results demonstrate that this method outperforms the methods of Ehance-Lee (E-lee), contextual model based on wavelet domain (Wavelet-context), and Hidden Markov Tree model bases on wavelet domain (Wavelet-hmt) on there indexes: Floating index (FI), Standard deviation and Edge saving index of vertical direction, by using a real SAR image. However, the method can not only reduce the speckle noise but also preserve edges and high frequency information, and gets considerable visual effect on SAR Image denoising.