A new two-parameter half-logistic distribution with numerical analysis and applications

Objectives: To investigate the Modified Inverse Weibull Distribution (MIWD) to determine its effectiveness in modelling real customer transaction data, which is often skewed and exhibits heavy-tailed characteristics. Methods: Parameters of the model were estimated using the Maximum Likelihood Estimation (MLE) technique. The model's performance was evaluated using goodness-of-fit measures, such as the log-likelihood (ℓ), Akaike Information Criterion (AIC), Bayesian Information Criterion (BIC), and Kolmogorov–Smirnov (K–S) statistic. The probability density function (PDF), cumulative distribution function (CDF), hazard function, and survival function were derived analytically and visualized with Python to assess model behavior and data alignment. Findings: The MIWD demonstrated a better fit for the customer transaction data than its sub-models and other competing distributions. The estimated probability density function (PDF), cumulative distribution function (CDF), hazard, and survival functions highlighted the model's adaptability in representing both skewness and heavy-tailed characteristics in actual transaction data. Novelty: The main contribution of this study is the empirical validation of the four-parameter MIWD using actual customer transaction data, demonstrating its superiority over established sub-models based on various quantitative criteria. The findings provide compelling evidence that the MIWD is a robust and adaptable alternative for modelling skewed, heavy-tailed transaction and lifetime data, with practical applications in customer behavior analysis, reliability engineering, and risk modelling. Keywords: Modified Inverse Weibull Distribution, Maximum Likelihood Estimation, Customer transaction data, Parameters, Rayleigh distribution

This study presents the Kumaraswamy Marshal–Olkin Flexible Weibull Extension (KMO-FWE) distribution, a newly developed probability model designed to extend existing lifetime distributions. This extension enhances the ability to model various hazard rate patterns with greater flexibility. The study explores the fundamental properties of this distribution, including the cumulative distribution function (CDF), probability density function (PDF), survival function, hazard function, moments, moment generating function, quantile function, and order statistics. To estimate the distribution’s parameters, several statistical methods are assessed, with a primary focus on Maximum Likelihood Estimation (MLE). Additionally, alternative estimation techniques such as Maximum Product Spacing (MPS), Least Squares (LS), Weighted Least Squares (WLS), and Percentile Estimation (PE) are considered. A Monte Carlo simulation study is conducted to evaluate the accuracy and efficiency of these estimation approaches under both complete data and Type-II censoring conditions. The results indicate that MLE is highly effective for large sample sizes but may introduce bias in smaller samples. In contrast, MPS provides stable parameter estimates under more complex conditions. While LS and WLS are computationally straightforward, their performance diminishes in the presence of censoring. Meanwhile, PE proves beneficial in reliability analysis based on percentile estimation. Overall, the findings highlight the KMO-FWE distribution as a versatile and reliable model, suitable for applications in reliability engineering, survival analysis, and biomedical research.

In this paper, we have derived and studied new probability distributions by extending the 2‐dimensional Rayleigh distribution (RD). First, we extend the RD to 3 dimensions and then generalize it to k dimensions for any positive integer k ≥ 3. The distributions are named the 3‐dimensional Rayleigh distribution (3‐DRD) and k‐dimensional Rayleigh distribution (k‐DRD), respectively. For both 3‐DRD and k‐DRD, detailed mathematical and statistical properties including derivations of the corresponding cumulative distribution, probability density, survival, and hazard functions, moments, moment generating functions, mode, skewness, kurtosis, and differential entropy are obtained in closed forms. Parameter estimation is done for both models using the maximum likelihood estimation method and some statistical properties of the estimator are discussed for each case. Interestingly, the commonly known Normal, Rayleigh, Maxwell–Boltzmann, chi‐square, gamma, and Erlang distributions are related to the newly developed extended RDs as special cases. For the 3‐DRD, plots of cumulative distribution, probability density, survival, and hazard functions are exhibited, a simulation study is carried out, and random samples are generated using the standard accept–reject (AR) algorithm to check the efficiency of the maximum likelihood estimates of the parameter. Moreover, the new 3‐DRD model is fitted to one simulated and three real datasets, revealing good performance compared to four existing Rayleigh‐based distributions. This study will contribute new knowledge to the field of applied statistics and probability, and the findings will be used as a basis for future research in the field.

A generalization of the half logistic distribution is developed through exponentiation of its cumulative distribution function and termed the Type I Generalized Half Logistic Distribution (GHLD). GHLD’s distributional characteristics and parameter estimation using maximum likelihood and modified maximum likelihood methods are presented with comparisons. Comparison of Type I GHLD and the exponential distribution is conducted via likelihood ratio criterion.

：A new distribution called the exponentiated Burr XII Weibull(EBW) distributions is proposed and presented. This distribution contains several new and known distributions such as exponentiated log-logistic Weibull, exponentiated log-logistic Rayleigh, exponentiated log-logistic exponential, exponentiated Lomax Weibull, exponentiated Lomax Rayleigh, exponentiated Lomax Exponential, Lomax Weibull, Lomax Rayleigh Lomax exponential, Weibull, Rayleigh, exponential and log-logistic distributions as special cases. A comprehensive investigation of the properties of this generalized distribution including series expansion of probability density function and cumulative distribution function, hazard and reverse hazard functions, quantile function, moments, conditional moments, mean deviations, Bonferroni and Lorenz curves, R´enyi entropy and distribution of order statistics are presented. Parameters of the model are estimated using maximum likelihood estimation technique and real data sets are used to illustrate the usefulness and applicability of the new generalized distribution compared with other distributions.

In this article we transmute the type I half logistic distribution using quadratic rank transmutation map to develop a transmuted type I half logistic distribution. The quadratic rank transmutation map enables the introduction of extra parameter into its baseline distribution to enhance more flexibility in the analysis of data in various disciplines such as reliability analysis in engineering, survival analysis, medicine, biological sciences, actuarial science, finance and insurance. The mathematical properties such as moments, quantile, mean, median, variance, skewness and kurtosis of this distribution are discussed. The reliability and hazard functions of the transmuted type I half logistic distribution are obtained. The probability density functions of the minimum and maximum order statistics of the transmuted type I half logistic distribution are established and the relationships between the probability density functions of the minimum and maximum order statistics of the parent model and the probability density function of the transmuted type I half logistic distribution are considered. The parameter estimation is done by the method of maximum likelihood estimation. The flexibility of the model in statistical data analysis and its applicability is demonstrated by using it to fit relevant data. The study is concluded by demonstrating that the transmuted type I half logistic distribution has a better goodness of fit than its parent model. We hope this model will serve as an alternative to the existing ones in the literature in fitting positive real data.

This paper presents a new generalized bounded distribution called the Kumaraswamy unit-Gompertz (KUG) distribution. Some of the Mathematical properties which include; the density function, cumulative distribution function, survival and hazard rate functions, quantile, mode, median, moment, moment generating function, Renyi entropy and distribution of order statistics are derived. We employ the maximum likelihood estimation method to estimate the unknown parameters of the proposed KUG distribution. A Monte Carlo simulation study is carried out to investigate the performance of the maximum likelihood estimates of the unknown parameters of the proposed distribution. Two real datasets are used to illustrate the applicability of the proposed KUG distribution in lifetime data analysis.

Assumption of normality in statistical analysis had been a common practice in many literature, but in the event where small sample is obtainable, then normality assumption will lead to erroneous conclusion in the statistical analysis. Taking a large sample had been a serious concern in practice due to various factors. In this paper, we further derived some inferential properties for log student’s t-distribution (simply log-t distribution) which makes it more suitable as substitute to log-normal when carrying out analysis on right-skewed small sample data. Mathematical and Statistical properties such as the moments, cumulative distribution function, survival function, hazard function and log-concavity are derived. We further extend the results to case of multivariate log-t distribution; we obtained the marginal and conditional distributions. The parameters estimation was done via maximum likelihood estimation method, consequently its best critical region and information matrix were derived in order to obtain the asymptotic confidence interval. The applications of log-t distribution and goodness-of-fit test was carried out on two dataset from literature to show when the model is most appropriate.

In a recent article by Shanker et al. (2017), the three-parameter Lindley distribution has been studied. The present paper is a continuation of the investigation of the properties of this distribution because of its high flexibility for modeling lifetime data. We studied some statistical properties of this distribution as central tendency measures, dispersion measures, and shape measures. In addition, the mode and the quantile function of the distribution were derived by the authors. The three parameters were estimated by the Maximum Product of Spacing Method (MPS) due to its fame in estimating parameters. A simulation study is carried out to examine the consistency of estimators using mean square error (MSE). The estimators showed that they have the property of consistency because MSEs decrease with increasing the size of the sample. On the practical side, the MPS estimates were used to obtain statistical properties, probability density function (p.d.f), cumulative distribution function (c.d.f), survival function, and hazard function for real data which represents COVID-19 Data in Iraq/Al-Anbar Province. We found the flexibility of the distribution in representing life data and the possibility of getting the patients' probability of death and probability of survival for the time.

In this paper, a composite distribution of Kumaraswamy and Lindley distributions namely, Kumaraswamy-Lindley Kum-L distribution is introduced and studied. The Kum-L distribution generalizes sub-models for some widely known distributions. Some mathematical properties of the Kum-L such as hazard function, quantile function, moments, moment generating function and order statistics are obtained. Estimation of parameters for the Kum-L using maximum likelihood estimation and least square estimation techniques are provided. To illustrate the usefulness of the proposed distribution, simulation study and real data example are used.

In the statistical literature, several discrete distributions have been developed so far for modeling non-negative integer-valued phenomena, yet there is still room for new counting models that adequately capture the diversity of real data sets. Here, we first discuss a count distribution derived as a discrete analogue of the continuous half-logistic distribution, which is obtained by preserving the expression of its survival function at each non-negative integer support point. The proposed discrete distribution has a mode at zero and allows for over-dispersion; these two features make it suitable for modeling purposes in many fields (e.g., insurance and ecology), when these conditions are satisfied by the data. In order to widen its spectrum of applications, a discrete analogue is also presented of the type I generalized half-logistic distribution (obtained by adding a shape parameter to the simple one-parameter half-logistic), which allows us to model count data whose mode is not necessarily zero. For these new count distributions, the main statistical properties are outlined, and parameter estimation along with related issues is discussed. Their feasibility is proved on two real data sets taken from the literature, which have already been fitted by other well-established count distributions. Finally, a possible application is illustrated in the insurance field, related to the exact/approximate determination of the distribution of the total claims amount through the well-known Panjer’s recursive formula, within the framework of collective risk models.

Half-Cauchy generalized exponential (HCGE) distribution is a novel distribution that we have proposed on in this paper. The quantiles, the measures of skewness based on quartiles, and the measures of kurtosis based on octiles, survival function, the probability density function, hazard function, cumulative distribution function, cumulative hazard function, are just a few of the crucial statistical properties we have derived for the proposed distribution. To estimate the parameters of the half-Cauchy generalized exponential distribution, the maximum likelihood estimation method has been applied. For the evaluation of the new distribution’s potential, we have considered a real dataset and compared the goodness-of-fit attained by proposed distribution with some competing distribution. The suggested model fits the data much better and is more adaptable than some other models.

Renyi entropy based design of heavy tailed distribution for return of financial assets

A new class of distributions called the log-logistic Weibull–Poisson distribution is introduced and its properties are explored. This new distribution represents a more flexible model for lifetime data. Some statistical properties of the proposed distribution including the expansion of the density function, quantile function, hazard and reverse hazard functions, moments, conditional moments, moment generating function, skewness and kurtosis are presented. Mean deviations, Bonferroni and Lorenz curves, Rényi entropy and distribution of the order statistics are derived. Maximum likelihood estimation technique is used to estimate the model parameters. A simulation study is conducted to examine the bias, mean square error of the maximum likelihood estimators and width of the confidence interval for each parameter and finally applications of the model to real data sets are presented to illustrate the usefulness of the proposed distribution.

In this work, we provide an extended one parameter distribution into a new two parameter life model and called it the New Extended “A” (NEA) distribution. This new model provides the best description of the data sets in different sectors. Both of the probability distribution function (PDF) and the cumulative distribution function (CDF) of the NEA distribution are derived from one of the new families. The suggested distribution’s properties including moments, quantile function, survival function, hazard rate function, odds function and mode are deduced and acquired in explicit forms using Taylor expansion to simplify the integrals. The Rényi entropy of NEA distribution is derived and the maximum likelihood method for estimating its parameters is deduced. Numerical simulations are used to study the behavior of the parameters with different sizes of samples. According to the simulation results of this work, the maximum likelihood estimators are advised to be a suitable estimation method for estimating the parameters of the NEA distribution. We show the importance and flexibility of the NEA distribution by comparing it to some competing distributions using five real data sets from different sectors in behavioral sciences, ecophysiological, industry and health. Our new model is shown to be better than all competing distributions. Received: October 6, 2023Accepted: November 15, 2023