A Novel Direct Torque Control Scheme for Permanent Magnet Synchronous Motor

In the permanent magnetic synchronous motor (PMSM) system with active disturbance rejection controller (ADRC), the estimation accuracy of extended state observer (ESO) will decrease when the ADRC does not depend on the system model completely. In order to improve the estimation accuracy, this paper proposes an improved ADRC approach by adding a model compensation term. Furthermore, the rotor inertia and viscous friction coefficient in the model compensation term is identified by the model reference adaptive identification (MRAI) algorithm. The load torque is estimated according to the mechanical equation of PMSM system. Then the identification values of rotor inertia, viscous friction coefficient, and load torque make up the compensation term of the ESO. Simulation results indicate that this improved ADRC approach has the better parameter robustness and anti-load-disturbance performance.

In order to meet the precision requirements and tracking performance of the continuous rotary motor electro-hydraulic servo system under unknown strong non-linear and uncertain strong disturbance factors, such as dynamic uncertainty and parameter perturbation, an improved active disturbance rejection control (ADRC) strategy was proposed. The state space model of the fifth order closed-loop system was established based on the principle of valve-controlled hydraulic motor. Then the three parts of ADRC were improved by parameter perturbation and external disturbance; the fast tracking differentiator was introduced into linear and non-linear combinations; the nonlinear state error feedback was proposed using synovial control; the extended state observer was determined by nonlinear compensation. In addition, the grey wolf algorithm was used to set the parameters of the three parts. The simulation and experimental results show that the improved ADRC can realize the system frequency 12 Hz when the tracking accuracy and response speed meet the requirements of double ten indexes, which lay foundation for the motor application.

The PID control strategy is usually used to control the motor in the electric servo loading system CESLS), however there are some nonlinear factors such as mechanism clearance and surplus torque in the loading process, the conventional PID control method can't guarantee the control performance and the loading accuracy of the ESLS. A position feed-forward compensation controller is introduced in the ESLS, and an outer loop active disturbance rejection control (ADRC) strategy is designed to eliminate position disturbance and surplus torque disturbance in this paper. The method of “observation + compensation” used in the outer loop ADRC controller is not only to suppress the surplus torque, but also to improve the steady-state performance of the ESLS. The simulation result shows that the electric servo loading system based on ADRC strategy can effectively improve the tracking accuracy of the ESLS and enhance the stability of the ESLS.

In permanent magnetic synchronous motor (PMSM) speed regulation system, the tracking performance and disturbance rejection property of the system are coupled when using conventional active disturbance rejection control (ADRC) controller, which complicates the parameter setting of the controller. A decoupled ADRC controller with position feedback is proposed in this paper. Extended state observer (ESO) is modified to make disturbance rejection property of the system independent of the proportional coefficient, which affects both the tracking performance and the disturbance rejection property in the conventional ADRC control system. Using the modified ESO, the tracking performance and disturbance rejection property can be adjusted by the proportional coefficient and the bandwidth of ESO respectively, thus simplifies the parameter setting of the controller. Extensive experiments are performed on dSPACE DS1103 to verify the validity and practicality of the proposed algorithm.

In this paper, a three-phase grid-connected photovoltaic system based on active disturbance rejection controller (ADRC) is proposed to solve the problem of voltage instability which is caused by many internal uncertainties and external disturbances. A tracking differentiator is used to arrange the transient process to reduce the initial error, which solves the problem of large overshoot. The extended state observer is used to estimate the internal and external total disturbances in real-time, and adopts a linearisation technique via dynamic compensation process, which can reject internal and external disturbances effectively. The simulation experiments show that ADRC has better performance than PI controller in reducing power loss and rejecting disturbances.

A tracking control algorithm based on active disturbance rejection controller (ADRC) is proposed to overcome the telescope’s mount fluctuation. The fluctuations are caused by internal and external disturbance when the large aperture telescope runs at ultra-low speed with direct drive. According to the high-precision and high-stability requirements of a large aperture telescope, the ADRC position controller is designed based on segmented arc Permanent Magnet Synchronous Motors (arc PMSMs). The tracking differentiator of ADRC is designed to undergo a transition process to avoid overshoot in the position loop. The speed of target tracking process is observed by the extended state observer and the position information in the system is estimated in real time. The current control variable of the segmented arc PMSM is generated by implementing a non-linear state error feedback control law. The simulation results demonstrate that the proposed control strategy can not only accurately estimate the position and speed of the tracking target, but also estimate the disturbance to compensate the control variables. Experiments showed that the speed error is less than 0.05′ s−1 when using the ADRC, and it can realize high tracking performance when compared with PID controller, which improves the robustness of a large aperture telescope control system.

In order to overcome the problems of linear control method, which are unfavorable performance and highly depending on the accuracy of vehicle model, active disturbance rejection control(ADRC) strategy is used to complete active front wheel steering(AFS) control in this paper. According to the general principle of ADRC, a second order ADRC strategy is designed. Under the operation conditions of high speed single lane change and braking on µ-split road, the control performance is studied by means of simulation. The results show that the ADRC strategy can realize AFS control effectively and decrease the dependence on the accuracy of vehicle model. At the same time, the performance is better than that of PID control.

Automatic carrier landing system based on active disturbance rejection control with a novel parameters optimizer

Finite-time output consensus control of nonlinear uncertain multi-agent systems via extended state observer

Permanent magnetic synchronous motor (PMSM) is a strong coupling and non-linear system. In the speed-loop of PMSM servo system controlled by active disturbance rejection controller (ADRC), it is difficult to ensure the estimation precision of disturbance by extended state observer (ESO) in the case of big disturbance. In the paper, the ADRC based on the artificial neural network (ANN) is applied to the speed-loop of PMSM servo system. The result of simulation shows that this algorithm has better anti-load-disturbance performance.

Electromechanical actuators (EMA) are becoming more and more widely used. As the core technology of EMA, servo control technology determines their performance. In this paper, an active disturbance rejection control (ADRC) method with an improved extended state observer (ESO) is proposed to design a cascade controller of EMA based on permanent magnet synchronous motor (PMSM). The mathematical model of PMSM in a two-phase rotating coordinate system is established, then it is decoupled by an id=0 current control method to realize the vector control of the motor. In a three closed-loop vector control system, a PID controller including current loop, speed loop and position loop is designed. To solve the problems caused by measurement noise, the filter link and system are modeled as a whole, and an improved ESO is constructed. On this basis, an ADRC controller of the speed loop and position loop of PMSM is designed and simulated based on Simulink. Based on the physical test platform, a load step test and load disturbance test of ADRC are completed. The results show that, in comparison to the PID method, the ADRC method shortens the response time by 25% on average, and reduces the overshoot by 60% on average. So, it can be concluded that ADRC has good static and dynamic performance, which has a good guiding role for engineering practice.

Hybrid underwater gliders (HUGs) combine buoyancy-driven gliding with propeller-assisted propulsion, offering extended endurance and enhanced mobility for complex underwater missions. However, precise depth control remains challenging due to system uncertainties, environmental disturbances, and inadequate adaptability of conventional control methods. This study proposes a novel optimized line-of-sight active disturbance rejection control (OLOS-ADRC) strategy for HUG depth tracking in the vertical plane. First, an Optimized Line-of-Sight (OLOS) guidance dynamically adjusts the look-ahead distance based on real-time cross-track error and velocity, mitigating error accumulation during path following. Second, a Tangent Sigmoid-based Tracking Differentiator (TSTD) enhances the disturbance estimation capability of the Extended State Observer (ESO) within the Active Disturbance Rejection Control (ADRC) framework, improving robustness against unmodeled dynamics and ocean currents. As a critical step before costly sea trials, this study establishes a high-fidelity simulation environment to validate the proposed method. The comparative experiments under gliding and hybrid propulsion modes demonstrated that OLOS-ADRC has significant advantages: the root mean square error (RMSE) for depth tracking was reduced by 83% compared to traditional ADRC, the root mean square error for pitch angle was decreased by 32%, and the stabilization time was shortened by 14%. This method effectively handles ocean current interference through real-time disturbance compensation, providing a reliable solution for high-precision HUG motion control. The simulation results provide a convincing foundation for future field validation in oceanic environments. Despite these improvements, the study is limited to vertical plane control and simulations; future work will involve full ocean trials and 3D path tracking.

Single-stage three-phase isolated matrix rectifiers (TIMRs) have high efficiency and compact configurations and are very suitable for electric vehicle (EV) chargers. However, external and internal disturbances challenge the robustness and tracking performance of EV chargers, and conventional proportional integral (PI) controllers cannot solve the unmodeled dynamics and the uncertainty of model parameters in the system, so other feedback controllers, which have disturbance rejection performance, need to be designed. Therefore, this article proposes a dual-loop control strategy based on active disturbance rejection control (ADRC) to guarantee high-speed dynamic response and strong robustness against disturbances. First, the dynamic model of the TIMR is established and divided into two parts to facilitate the controller design. Second, the extended state observer (ESO) is designed to estimate and compensate for the disturbances of the system, and the inner current loop and the outer current loop are designed based on the second-order ADRC. In addition, a simplified parameter-tuning method of the proposed control scheme is presented in detail. Finally, a frequency-domain analysis is given to explain the robust performance of the proposed control scheme. The effectiveness and feasibility of the proposed controller are verified by simulation and experimental results.

This paper presents the design and implementation of a novel sliding mode control integrated with active disturbance rejection (SMCDR) for precise robust trajectory tracking of piezoelectric nanopositioning stages. The model uncertainties, nonlinearity, and external disturbances of the piezoelectric nanopositioning stage are regarded as a lumped disturbance, which is estimated by an extended state observer. The active disturbance rejection control (ADRC) strategy is used to realize a preliminary trajectory tracking, while the sliding mode control is adopted to handle the estimation error and residual uncertainties, and to improve the tracking performance. The exponential stability of the proposed SMCDR is proved using Lyapunov’s direct method. The proposed SMCDR controller combines the strength of both ADRC and sliding mode control, exhibits a simple structure, requires only the position measurements, and does not require any information of model parameters except for an approximate constant gain. Experimental results reveal the robustness of the SMCDR approach in suppressing the hysteresis of piezoelectric actuator, and illustrate the superior performance over conventional ADRC, integral sliding mode controller (ISMC) and PID controller for trajectory tracking control of piezoelectric nanopositioning stages.

A modified active disturbance rejection control strategy based on cascade structure with enhanced robustness