A Novel Method for 2DPCA-ICA in Face Recognition

Automatic facial feature extraction is one of the most important and attempted problems in computer vision. It is a necessary step in face recognition, facial image compression. There are many methods have been proposed in the literature for the facial feature extraction task. However, all of them have still disadvantage such as not complete reflection about face structure, face texture. Therefore, a combination of different feature extraction methods which can integrate the complementary information should lead to improve the efficiency of feature extraction stage. In this paper we describe a methodology for improving the efficiency of feature extraction stage based on the association of two methods: geometric feature based method and Independent Component Analysis (ICA) method. Comparison of two methods of facial feature extraction: geometric feature based method combined with PCA method (called GPCA) versus geometric feature based method combined with ICA method (called GICA) on CalTech dataset has demonstrated the efficiency of GICA method. Our results show that GICA achieved good performance 96.57% compared to 94.70% of GPCA method. Furthermore, we compare two methods mentioned above on our dataset, with performance of GICA being 98.94% better 96.78% of GPCA method. The experiment results have confirmed the benefits of the association geometric feature based method and ICA method in facial feature extraction.KeywordsFace recognitionindependent component analysis (ICA)principal component analysis (PCA)geometric features

The electroencephalogram (EEG) is a set of data measured by electrodes placed on the scalp and is often under the influences of artifacts. Mental EEG is recorded when a person performs different mental tasks. In this article, we separated the mental EEG signals into independent components with individual meanings based on Independent Component Analysis (ICA) method, and the EEG was reconstructed by excluding those components related to ocular and line artifacts for further feature extraction. In the end, we made a simulation to compare denoising of mental EEG using ICA with the result using wavelet packet analysis. The ICA method was found to be more efficient than the classical methods.

Traditional face recognition methods such as Principal Components Analysis(PCA), Independent Component Analysis(ICA) and Linear Discriminant Analysis(LDA) are linear discriminant methods, but in the real situation, a lot of problems can't be linear discriminated; therefore, researchers proposed face recognition method based on kernel techniques which can transform the nonlinear problem of inputting space into the linear problem of high dimensional space. In this paper, we propose a recognition method based on kernel function which combines kernel Fisher Discriminant Analysis(KFDA) with kernel Principle Components Analysis(KPCA) and use typical ORL(Olivetti Research Laboratory) face database as our experimental database. There are four key steps: constructing feature subspace, image projection, feature extraction and image recognition. We found that the recognition accuracy has been greatly improved by using nonlinear identification method and combined feature extraction methods. We use MATLAB software as the platform, and use the GUI to demonstrate the process of face recognition in order to achieving human-computer interaction and making the process and result more intuitive.

<span>The purpose of this research is to observe the effectiveness of independent component analysis (ICA) method for denoising raw EEG signals based on word imagination, which will be used for word classification on unspoken speech. The electroencephalogram (EEG) signals are signals that represent the electrical activities of the human brain when someone is doing activities, such as sleeping, thinking or other physical activities. EEG data based on the word imagination used for the research is accompanied by artifacts, that come from muscle movements, heartbeat, eye blink, voltage and so on. In previous studies, the ICA method has been widely used and effective for relieving physiological artifacts. Artifact to signal ratio (ASR) is used to measure the effectiveness of ICA in this study. If the ratio is getting larger, the ICA method is considered effective for clearing noise and artifacts from the EEG data. Based on the experiment, the obtained ASR values from 11 subjects on 14 electrodes amounted are within the range of 0,910 to 1,080. Thus, it can be concluded that ICA is effective for removing artifacts from EEG signals based on word imagination.</span>

Two distinct topics are dealt with. First, a new method for independent component analysis (ICA) has been constructed that exploits the invariance of criteria under component-wise scaling, which is intrinsic to ICA. This practical and simple ICA method is called the nested Newton's method. When the number of the channel of observation is less than a certain level, factor analysis (FA) is ineffective (bound for FA). The target of this paper is these cases. Three of many concrete advantages of the nested Newton's method are addressed. i) It is robust against Gaussian noise and outperforms existing methods, such as JADE and Fast ICA, especially under Gaussian noise conditions. ii) It is highly stable globally. iii) Each step resolves itself into two-dimensional (2-D) matrix problems. There is thus no need to deal with gigantic matrices, which means that fewer computational resources are required. Second, a method called "post factor analysis (post-FA)" is described that is aimed to be useful as post-processing for ICA. Although it is functionally similar to conventional FA, post-FA is a completely new method and is more powerful than conventional FA in compensation for its stronger assumption that there are mutually independent sources behind observations. By fully making use of this assumption, post-FA is capable of estimating the noise variance beyond the known limit for FA. Furthermore, it improves the accuracy of ICA to a considerable extent. Any ICA algorithm without prewhitening (pre-WH) or pre-factor-analysis (pre-FA) can be used for preprocessing, although the nested method is a good candidate.

Face recognition is an important research area with many potential applications such as biometric security. Among various techniques, eigenface method by principal component analysis (PCA) of face images has been widely used. In traditional eigenface methods, PCA was used to get the eigenvectors of the covariance matrix of a training set of face images and recognition was achieved by applying a template matching scheme with the vectors obtained by projecting new faces along a small number of eigenfaces. In order to avoid the time consuming step of recomputing eigenfaces when new faces are added, we use a set of modules to generate PCA based face representation for each subjects instead of PCA of entire face images. The localized nature of the representation makes the system easy to maintain and tolerant of local facial characteristic changes. Results indicate that the modular scheme yield accurate recognition on the widely used Olivetti Research Laboratory (ORL) face database.

Functional positron emission tomography (fPET) is a neuroimaging method involving continuous infusion of 18-F-fluorodeoxyglucose (FDG) radiotracer during the course of a PET examination. Compared with the conventional bolus administration of FDG in a static PET scan, which provides an average glucose uptake into the brain over an extended period of up to 30 ​min, fPET offers a significantly higher temporal resolution to study the dynamics of glucose uptake. Several earlier studies have applied fPET to investigate brain FDG uptake and study its relationship with functional magnetic resonance imaging (fMRI). However, due to the unique characteristics of fPET signals, modelling of the fPET signal is a complex task and poses challenges for accurate interpretation of the results from fPET experiments. This study applied independent component analysis (ICA) to analyse resting state fPET data, and to compare the performance of ICA and the general linear model (GLM) for estimation of brain activation in response to tasks. The fPET signal characteristics were compared using GLM and ICA methods to model fPET data from a visual activation experiment. Our aim was to evaluate GLM and ICA methods for analysing task fPET datasets, and to apply ICA methods to the analysis of resting state fPET datasets. Using both simulation and in-vivo experimental datasets, we show that both ICA and GLM methods can successfully identify task related brain activation. We report fPET metabolic resting state brain networks revealed by application of the fPET ICA method to a cohort of 28 healthy subjects. Functional PET provides a unique method to map dynamic changes of glucose uptake in the resting human brain and in response to extrinsic stimulation.

Recently, blind source separation (BSS) methods have gained significant attention in the area of signal processing. Independent component analysis (ICA) and second-order blind identification (SOBI) are two popular BSS methods that have been applied to modal identification of mechanical and structural systems. Published results by several researchers have shown that ICA performs satisfactorily for systems with very low levels of structural damping, for example, for damping ratios of the order of 1% critical. For practical structural applications with higher levels of damping, methods based on SOBI have shown significant improvement over ICA methods. However, traditional SOBI methods suffer when nonstationary sources are present, such as those that occur during earthquakes and other transient excitations. In this paper, a new technique based on SOBI, called the modified cross-correlation method, is proposed to address these shortcomings. The conditions in which the problem of structural system identification can be posed as a BSS problem is also discussed. The results of simulation described in terms of identified natural frequencies, mode shapes, and damping ratios are presented for the cases of synthetic wind and recorded earthquake excitations. The results of identification show that the proposed method achieves better performance over traditional ICA and SOBI methods. Both experimental and large-scale structural simulation results are included to demonstrate the applicability of the newly proposed method to structural identification problems.

SCTICA: Sub-packet constrained temporal ICA method for fMRI data analysis

In this paper, singular value decomposition (SVD) and its stability, proportion invariance, and rotation invariance of image matrix are discussed in detail. Optimal approximation of the rank reduction matrix is studied. As for the Olivetti Research Laboratory (ORL) face database, experimental results demonstrate that it is effective and feasible that singular values of the face image matrix are used as recognition features in face recognition, and that singular value features take on separability, stability and independence, and are valid in feature extraction of face image.

This paper presents a combination techniques of appearance-based and feature-based feature extraction on the T-Zone face area to improve the recognition performance. This study shows that the T-Zone area and the combined technique provides a significant impact on the face recognition rate. A T-Zone face image is first divided into small regions where Local Binary Pattern (LBP) histograms are extracted and then concatenated into a single feature vector. This feature vector will further reduce the dimensionality scope by using the well established Principle Component Analysis (PCA) technique. Experiments have been carried out on the different sets of the Olivetti Research Laboratory (ORL) database. High recognition rates are obtained when compared to other face recognition methods of the same class. Our result shows of 7% improvement compared with PCA and 2% improvement compare with Sub-Holistic PCA. Our studies proves that the T-Zone area which is consisting of eyes and nose region is a ‘significant facial region’, and we also show that LBP can easily be combined with PCA to reduce the length of the feature vector, while the recognition performance is improved.

Face recognition is a very old and popular biometric problem. In the last two decades, several challenges occur in face recognition such as expression, occlusion, illumination, pose variation, and low-quality image. Also, several techniques exist, such as Principle Component Analysis (PCA), Linear Discriminate Analysis (LDA), Local Non-Negative Matrix Factorization (LNME), Independent Component Analysis (ICA), and other variants, which finds good results under constrained scenarios. But, they give poor accuracy in an unconstrained scenarios such as illumination, pose variation, and occlusion. As Face recognition biometrics has gained great importance in occlusion condition, for example, a terrorists cover his face using facial accessories like sunglasses, scarves, or masks. This occlusion face recognition is categorized into two parts. 1) Feature extraction without occlusion detection face recognition. 2) Feature extraction with occlusion detection face recognition 3) occlusion recovery face recognition. Feature-based and fractal-based methods consider features around the eyes, nose, or mouth region to be used in the recognition face of the algorithm. This paper describes the different techniques and databases to handle the partial occlusion problem.

The purpose of this paper is to contrast, in terms of standard criteria for statistical independence, cumulant-based methods of independent component analysis (ICA) with a potentially more robust blind signal separation technique called BLISS. This is able to separate independent non-Gaussian co-channel signals from multisensor data using only the joint probability distributions of instantaneous linear mixtures of those signals. BLISS is also able, without prior array calibrations or training waveforms, to estimate individual steering vectors including unknown mutual coupling and multipath. We point out fundamental reasons for the difficulty of comparing the performance of different ICA algorithms on finite duration practical data. We also propose a novel method for applying real-valued ICA to complex-valued data. By separately estimating in-phase and quadrature un-mixing parameters, we avoid the difficulty of selecting a subset of real and complex-valued cumulants. To justify our approach, we extend the definition of independence to the complex-valued case.

Nonnegative matrix factorization (NMF) is known as a parts-based linear representation for nonnegative data. This method has been applied for blind source separation (BSS) when the sources are nonnegative. This paper presents a new NMF method for independent component analysis (ICA), which is useful for BSS without the nonnegativity constraint. Using this method, we transform the sources by their cumulative distribution functions (CDFs) and perform the nonparametric quantization to construct a nonnegative matrix where each entry represents the joint probability density of two transformed signals. The NMF procedure is accordingly realized to find the ICA demixing matrix. The independence between sources is maximized towards attaining the uniformity in the joint probability density. In the experiments on the separation of signal and music signals, we show the effectiveness of the proposed NMF-ICA compared to the infomax ICA and FastICA algorithms.

Face technologies which can be applied to access control and surveillance, are essential to intelligent vision-based human computer interaction. The research efforts in this field include face detecting, face recognition, face retrieval, etc. However, these tasks are challenging because of variability in view point, lighting, pose and expression of human faces. The ideal face representation should consider the variability so as to we can develop robust algorithms for our applications. Independent Component Analysis (ICA) as an unsupervised learning technique has been used to find such a representation and obtained good performances in some applications. In the first part of this paper, we depict the models of ICA and its extensions: Independent Subspace Analysis (ISA) and Topographic ICA (TICA).Then we summaraize the process in the applications of ICA and its extension in Face images. At last we propose a promising direction for future research.