A Novel Platform of Brain Computer Interface Based on Android

A brain computer interface (BCI) is a real-time communication system designed to allow users to voluntarily send messages or commands without sending them through the brain's normal output pathways. We designed a real-time BCI auxiliary game platform for motion disabled. Firstly, this system digitizes and stores the EEG signal, and exports the results of Signal Analysis on the Monitors to achieve the basic function which is playing pc-game through the human's ideas. COM technology allows the BCI platform has strong scalability to meet the needs of various types of brain computer interface solution for the games. Secondly, Fisher Distance criterion is used to select the features. And classification of Motor Imagery EEG evoked by a sequence of randomly mixed left and right motor imagery is performed by a back-propagation neural networks (BPNN), which is in order to recover the two EEG channels C3/C4. Finally, this paper presents one of these solutions, which control games by BCI based on motor imagery. This type of BCI solution is translating the motor imagery EEG into three control signals: left, right or stop. And then a simple game player can use it as an input device of to realize the function of operating games.

One of the main problems in Brain Computer Interface (BCI) systems is the non-stationary behavior of the electroencephalography (EEG) signals causing problems in real time applications. Another common problem in BCI systems is the situation where the labeled data are scarce. In this study, we take a semi-supervised learning perspective and propose solving both types of problems by updating the BCI system with labels obtained from the outputs of the classifier. To test the approach, data from motor imagery BCI system are used. Attributes extracted from EEG signals are classified with Linear Discriminant Analysis (LDA) and Support Vector Machines (SVM). With respect to the static classifiers, accuracy was improved approximately 4% using the proposed adaptation approach in the case of a training dataset. Even though the difference between the performance of static and adaptive classifiers decreases as the size of training data increases, the accuracy of our proposed adaptive classifier remains higher. The proposed approach has also improved the performance of a BCI system around 4% in the case of non-stationary signals as well.

Dealing with subjects who are unable to attain a proper level of performance, that is, those with brain–computer interface (BCI) illiteracy or BCI inefficients, is still a major issue in human electroencephalography (EEG) BCI systems. The most suitable approach to address this issue is to analyze the EEG signals of individual subjects independently recorded before the main BCI tasks, to evaluate their performance on these tasks. This study mainly focused on non-linear analyses and deep learning techniques to investigate the significant relationship between the intrinsic characteristics of a prior idle resting state and the subsequent BCI performance. To achieve this main objective, a public EEG motor/movement imagery dataset that constituted two individual EEG signals recorded from an idle resting state and a motor imagery BCI task was used in this study. For the EEG processing in the prior resting state, spectral analysis but also non-linear analyses, such as sample entropy, permutation entropy, and recurrent quantification analyses (RQA), were performed to obtain individual groups of EEG features to represent intrinsic EEG characteristics in the subject. For the EEG signals in the BCI tasks, four individual decoding methods, as a filter-bank common spatial pattern-based classifier and three types of convolution neural network-based classifiers, quantified the subsequent BCI performance in the subject. Statistical linear regression and ANOVA with post hoc analyses verified the significant relationship between non-linear EEG features in the prior resting state and three types of BCI performance as low-, intermediate-, and high-performance groups that were statistically discriminated by the subsequent BCI performance. As a result, we found that the frontal theta rhythm ranging from 4 to 8 Hz during the eyes open condition was highly associated with the subsequent BCI performance. The RQA findings that higher determinism and lower mean recurrent time were mainly observed in higher-performance groups indicate that more regular and stable properties in the EEG signals over the frontal regions during the prior resting state would provide a critical clue to assess an individual BCI ability in the following motor imagery task.

The brain-computer interface (BCI) work is to provide humans an alternative channel that allows direct transmission of messages from the brain by analyzing the brain’s mental activities [1–7]. The brain activity is recorded by means of multi-electrode electroencephalographic (EEG) signals that are either invasive or noninvasive. Noninvasive recording is convenient and popular in BCI applications so it is commonly used. According to the definition suggested at the first international meeting for BCI technology, the term BCI is reserved for a system that must not depend on the brain’s normal output pathways of peripheral nerves and muscles [2]. It has become popular for BCI systems on motor imagery (MI) EEG signals in the last decade [8]. It reveals that there are special characteristics of event-related desynchronization (ERD) and synchronization (ERS) in mu and beta rhythms over the sensorimotor cortex during MI tasks by discriminating EEG signals between left and right MIs [9, 10]. ERD/ERS is the task-related or event-related change in the amplitude of the oscillatory behavior of specific cortical areas within various frequency bands. An amplitude (or power) increase is defined as event-related synchronization while an amplitude (or power) decrease is defined as event-related desynchronization. As other event-related potentials, ERD/ERS patterns are associated with sensory processing and motor behavior [2]. The principal objective of this study is to propose a BCI system, which combines neuro-fuzzy prediction and multiresolution fractal feature vectors (MFFVs) with support vector machine, for MI classification.

Motor imagery EEG recognition based on conditional optimization empirical mode decomposition and multi-scale convolutional neural network

A novel Morse code-inspired method for multiclass motor imagery brain–computer interface (BCI) design

Brain computer interface (BCI) is known as a good way to communicate between brain and computer or other device. There are many kinds of physiological signal can operate BCI systems. Motor imagery (MI) has been demonstrated to be a good way to operate a BCI system. In some recent studies about MI based BCI systems, low accuracy rate and time consuming are common problems. In this thesis, a novel motor imagery algorithm is proposed to improve the accuracy rate and computational efficiency at the same time. The architecture of many BCI system is quite complex and they involve time consuming processing. The electroencephalography (EEG) signal is the most commonly used inputs for BCI applications but EEG is often contaminated with noise. To overcome such drawbacks, in this paper we use the common spatial pattern (CSP) for feature extraction from EEG and the linear discriminant analysis (LDA) for motor imagery classification. In this study, CSP and LDA have been used to reduce the artifact and classify Mi-based EEG signal. We have used two-level cross validation scheme to determine the subject specific best time window and number of CSP features. We have compared the performance of our system with BCI competition results. This novel algorithm with high accuracy rate and efficiency can be applied to real time BCI system in real-life applications.

The modern commercial industry is increasingly dependent on the analysis of vast data records. Analysing big electroencephalogram (EEG) signal data (called brain signal data) plays an important role in a wide variety of applications such as healthcare practices, brain computer interface (BCI) systems, innovative education, privacy and security, and biometrics. The key objective of this paper is to establish a methodological framework for identifying communicative intentions of motor disabled people from EEG data for application in BCI systems. The proposed framework is designed based on common spatial pattern (CSP) data method and optimized ensemble (OE) machine learning method for the application of BCI technologies. The CSP method is used for discovering important features from EEG data and finally the extracted features are fed as an input to optimized ensemble (OE) method. The proposed method was tested on BCI Competition III dataset IVa, which contains motor imagery-based EEG signal data. The experimental results show that our proposed method can handle brain signal big data for identifying communicative intentions for an advanced BCI system. We compared the performance of our proposed method with several other existing methods. In comparison with other established methods, our method achieves higher classification accuracy performance. This research assists the experts in processing and analysing EEG signals for BCI applications. It also supports technologists to create a new EEG data analyser for BCI systems.KeywordsElectroencephalographyBrain computer interfaceCommon spatial patternMachine learning

Event Abstract Back to Event Analysis and classification of EEG signals for brain computer interfaces Ugur Halici1*, E. Agi1, C. Özgen1 and I. Ulusoy1 1 Computer Vision and Intelligent Systems Research Laboratory, Middle East Technical University, Turkey Brain Computer Interfaces (BCIs) are systems developed in order to control devices by using only brain signals. Depending on the application, the device to be controlled might be a neuroprothesis, a wheel-chair or a computer. In BCI systems, different mental activities to be performed by the users are associated with different actions on the device to be controlled. The neurophysiologic brain signals produced as results of these mental activities are collected by a data acquisition device and converted to digital form. Electroencephalogram (EEG) is the most common technique employed for data acquisition in BCI systems today, due to its time-space resolution, its price and its easiness in use when compared to the other acquisition techniques. The digital brain signals collected are processed for feature extraction and then classified in order to decide on the associated action. A control signal produced according to the decision is used to change the state of the device to be controlled. Providing a feedback signal informing the user about the new state of the controlled device completes the BCI cycle. The early BCI systems were designed to work on pre-defined neurophysiologic features, where a feedback produced by a fixed set-up was provided to the system users. In these early BCI systems, the users should learn by themselves how to produce neurophysiologic signals in order to control the system. In several studies, it is reported that weeks, even months may be needed in order the user to learn how to produce these signals by adaptation of their brain. Recently, BCI systems in which machine learning algorithms employed for adapting the BCI system by using user specific signals are started to emerge. In several studies, it is shown that the adaptation of the BCI systems in this way reduces drastically the time required the user to able to produce appropriate signals and adaptation time in terms of days, even minutes are reported [1-4] The aim of this study is to analyze EEG signals collected for BCI purposes by using techniques Principal Component Analysis, Fisher Linear Discriminant Analysis, and Independent Component Analysis in order to reduce the dimension of the feature vectors obtained by sampling EEG signals in an representative manner and then classify the low dimension feature vectors obtained in this way by using Neural Networks and Support Vector Machines, which are able to learn through samples. The experimental studies are still going on for feature extraction and classification. The experimental results obtained will be presented in the final paper for comparison purposes.

BackgroundA novel artefact removal algorithm is proposed for a self-paced hybrid brain-computer interface (BCI) system. This hybrid system combines a self-paced BCI with an eye-tracker to operate a virtual keyboard. To select a letter, the user must gaze at the target for at least a specific period of time (dwell time) and then activate the BCI by performing a mental task. Unfortunately, electroencephalogram (EEG) signals are often contaminated with artefacts. Artefacts change the quality of EEG signals and subsequently degrade the BCI’s performance.MethodsTo remove artefacts in EEG signals, the proposed algorithm uses the stationary wavelet transform combined with a new adaptive thresholding mechanism. To evaluate the performance of the proposed algorithm and other artefact handling/removal methods, semi-simulated EEG signals (i.e., real EEG signals mixed with simulated artefacts) and real EEG signals obtained from seven participants are used. For real EEG signals, the hybrid BCI system’s performance is evaluated in an online-like manner, i.e., using the continuous data from the last session as in a real-time environment.ResultsWith semi-simulated EEG signals, we show that the proposed algorithm achieves lower signal distortion in both time and frequency domains. With real EEG signals, we demonstrate that for dwell time of 0.0s, the number of false-positives/minute is 2 and the true positive rate (TPR) achieved by the proposed algorithm is 44.7%, which is more than 15.0% higher compared to other state-of-the-art artefact handling methods. As dwell time increases to 1.0s, the TPR increases to 73.1%.ConclusionsThe proposed artefact removal algorithm greatly improves the BCI’s performance. It also has the following advantages: a) it does not require additional electrooculogram/electromyogram channels, long data segments or a large number of EEG channels, b) it allows real-time processing, and c) it reduces signal distortion.

Brain-Computer Interface (BCI) systems establish a control and communication relationship between the human brain and computers including robots or other devices to help individuals with severe motor disabilities. The classification of motor and mental imagery electroencephalogram (EEG) signals is complicated because these signals are usually case-specific and distinct models must be trained for each subject to process and classify his/her EEG signals. Moreover, in BCI systems EEG signals are processed online, so the time latency must be very low. In this paper, we have proposed a method based on signal-to-image conversion to investigate image processing techniques in the pair-wise classification of motor and mental imagery EEG signals. We first decomposed EEG signals of each trial into four sub-bands. Then, for each sub-band, we converted EEG time series to 2-dimensional (2D) images using covariance between signals of all channels. Then, statistical, textural and PCA-based features were extracted from these images and fed to a support vector machine (SVM) classifier. Our results were promising in the offline processing and achieved an average classification accuracy of 79.57%.

Brain-computer interface (BCI) systems have emerged as an augmentative technology that can provide a promising solution for individuals with motor dysfunctions and for the elderly who are experiencing muscle weakness. Steady-state visually evoked potentials (SSVEPs) are widely adopted in BCI systems due to their high speed and accuracy when compared to other BCI paradigms. In this paper, we apply combined magnitude and phase features for class discrimination in a real-time SSVEP-based BCI platform. In the proposed real-time system users gain control of a motorised bed system with seven motion commands and an idle state. Experimental results amongst eight participants demonstrate that the proposed real-time BCI system can successfully discriminate between different SSVEP signals achieving high information transfer rates (ITR) of 82.73 bits/min. The attractive features of the proposed system include noninvasive recording, simple electrode configuration, excellent BCI response and minimal training requirements.

Brain Computer Interface (BCI) has become one of the most interesting alternatives to support automatic systems able to interpret brain functions. Recently, the Motor Imagery (MI) paradigm is a widely topic of interest as a tool to develop BCI-based systems. Here, we present a relevant feature extraction methodology, termed MI discrimination using kernel relevance analysis (MIDKRA), to support MI classification in BCI systems. For such a purpose, a similarity criterion to rank the contribution of EEG features for classifying an MI paradigm is employed. The introduced approach includes the supervised information regarding the MI paradigm to find out a relevant set of features encoding discriminative information. We model the EEG recordings by considering both time and time-frequency representations. Moreover, a k nearest-neighbor classifier is carried out to validate the proposed feature relevance approach. Experimental results carried out on two different BCI databases, a well-known public MI data and an Emotiv-based dataset built by us, demonstrate that MIDKRA outperforms state of the art methods and it is a suitable alternative to support straightforward BCI systems.

The structure and functioning of the human brain has always attracted the attention of scientists. In the past 10-20 years, one of the popular areas of study related to the human brain is the Brain Computer Interface (BCI) systems. Different brain monitoring techniques such as EEG, fNIRS, MEG can be used to observe human brain activities in BCI systems. In addition to the differences in monitoring methods in BCI systems, the focus of system operation may also change. In some BCI systems, it may be preferable to focus on Motor Imagery in another system, while the focus is on the P300 signals in EEG data. This requires a differentiation between the systems during the operational phases of the BCI system. One of the most significant points of system differentiation is the classification stage of the BCI system. In this study, a compilation of classification methods commonly used in Brain Computer Interface systems based on EEG based Motor Imagery will be carried out. This study will provide researchers with information about the methods that can be used in their own systems for classification in Brain Computer Interface systems based on EEG based Motor Imagery.

Research on brain–computer interfaces (BCIs) advances the way scientists understand how the human brain functions. The BCI system, which is based on the use of electroencephalography (EEG) signals to detect motor imagery (MI) tasks, enables opportunities for various applications in stroke rehabilitation, neuroprosthetic devices, and communication tools. BCIs can also be used in emotion recognition (ER) research to depict the sophistication of human emotions by improving mental health monitoring, human–computer interactions, and neuromarketing. To address the low accuracy of MI-BCI, which is a key issue faced by researchers, this study employs a new approach that has been proven to have the potential to enhance motor imagery classification accuracy. The basic idea behind the approach is to apply feature extraction methods from the field of emotion recognition to the field of motor imagery. Six feature sets and four classifiers were explored using four MI classes (left and right hands, both feet, and tongue) from the BCI Competition IV 2a dataset. Statistical, wavelet analysis, Hjorth parameters, higher-order spectra, fractal dimensions (Katz, Higuchi, and Petrosian), and a five-dimensional combination of all five feature sets were implemented. GSVM, CART, LinearSVM, and SVM with polynomial kernel classifiers were considered. Our findings show that 3D fractal dimensions predominantly outperform all other feature sets, specifically during LinearSVM classification, accomplishing nearly 79.1% mean accuracy, superior to the state-of-the-art results obtained from the referenced MI paper, where CSP reached 73.7% and Riemannian methods reached 75.5%. It even performs as well as the latest TWSB method, which also reached approximately 79.1%. These outcomes emphasize that the new hybrid approach in the motor imagery/emotion recognition field improves classification accuracy when applied to motor imagery EEG signals, thus enhancing MI-BCI performance.