A novel wavelet based independent component analysis method for pre-processing computer video leakage signal

Two distinct topics are dealt with. First, a new method for independent component analysis (ICA) has been constructed that exploits the invariance of criteria under component-wise scaling, which is intrinsic to ICA. This practical and simple ICA method is called the nested Newton's method. When the number of the channel of observation is less than a certain level, factor analysis (FA) is ineffective (bound for FA). The target of this paper is these cases. Three of many concrete advantages of the nested Newton's method are addressed. i) It is robust against Gaussian noise and outperforms existing methods, such as JADE and Fast ICA, especially under Gaussian noise conditions. ii) It is highly stable globally. iii) Each step resolves itself into two-dimensional (2-D) matrix problems. There is thus no need to deal with gigantic matrices, which means that fewer computational resources are required. Second, a method called "post factor analysis (post-FA)" is described that is aimed to be useful as post-processing for ICA. Although it is functionally similar to conventional FA, post-FA is a completely new method and is more powerful than conventional FA in compensation for its stronger assumption that there are mutually independent sources behind observations. By fully making use of this assumption, post-FA is capable of estimating the noise variance beyond the known limit for FA. Furthermore, it improves the accuracy of ICA to a considerable extent. Any ICA algorithm without prewhitening (pre-WH) or pre-factor-analysis (pre-FA) can be used for preprocessing, although the nested method is a good candidate.

Our goal is to develop a novel BCI based on an eye movements system employing EEG signals on-line. Most of the analysis on EEG signals has been performed using ensemble averaging approaches. However,It is suitable to analyze raw EEG signals in signal processing methods for BCI. In order to process raw EEG signals, we used independent component analysis(ICA). However, we do not know which ICA algorithms have good performance. It is important to check which ICA algorithms have good performance to develop BCIs. Previous paper presented extraction rate of saccade-related EEG signals by five ICA algorithms and eight window size. However, three ICA algorithms, the FastICA, the NG-FICA and the JADE algorithms, are based on 4th order statistic and AMUSE algorithm has an improved algorithm named SOBI.Therefore, we must re-select ICA algorithms. In this paper, we add new algorithms; the SOBI and the MILCA. The SOBI is an improved algorithm based on the AMUSE and uses at least two covariance matrices at different time steps. The MILCA use the independency based on mutual information. Using the Fast ICA, the JADE, the AMUSE, the SOBI, and the MILCA, we extract saccade-related EEG signals and check extracting rates. Secondly, in order to get more robustness against EOG noise, we use improved FastICA with reference signals and check extracting rates.

Musical Instrument Sound Signal Separation from Mixture using DWT and Fast ICA Based Algorithm in Noisy Environment

The impact of outliers on signal separation performance of an independent component analysis (ICA) algorithm is an important factor when selecting an ICA algorithm. If an ICA estimator has the property of B-robustness, the influence of an extreme point is bounded, leading to good separation performance in the presence of outliers. Since this property is binary, it does not give the degree of influence an outlier has on the separation performance. To address this issue, a Mamdani-type fuzzy inference, based on the location of a potential outlier and on the skewness of the data set, has been developed. It creates an outlier sensitivity map for an ICA algorithm. The implication of this work is a criterion to switch from one ICA algorithm to another in real time, as determined by the algorithms sensitivity to the data set under consideration. This paper describes estimation of the outlier impact on the separation performance of the non-B-robust FastICA algorithm using a Mamdani-type fuzzy inference. In simulations with data sets contaminated by outliers, the FastICA sensitivity map resembles the separation performance measured by the Amari performance index.

The higher-order statistics based independent component analysis (ICA) algorithm can extract natural image features. Based on the maximum likelihood ICA criterion, and using the weighted orthogonal constrained natural gradient, a new ICA algorithm is proposed. Natural image feature extraction simulation results show that, compared with other ICA algorithms, the proposed algorithm has faster convergence rate, most of the extracted basis vectors are localized in space, frequency, and orientation, which can describe the features of the natural images well, and the corresponding coefficients are very sparse, obey stronger super-Gaussian distribution with very high kurtosis.

This article deals with fetal electrocardiography (fECG) processing using independent component analysis (ICA). Testing is performed on 7 synthetic recordings with a different level of signal-to-noise ratio (SNR) and the evaluation is performed on calculation of improvement SNR and root mean square error (RMSE). The experiment was based on testing multiple algorithms based on the ICA method, such as the algorithm based on kurtosis value, the algorithm based on negentropy value and the algorithm called kurtosis maximization ICA. The results showed that all ICA-based algorithms a lot improve SNR and have a low value of RMSE, which indicates that signals after filtration are almost similar to the reference signals. All three ICA-based algorithms could be used for fECG extraction, but the lowest accuracy was achieved by the algorithm called kurtosis maximization ICA.

<span>The purpose of this research is to observe the effectiveness of independent component analysis (ICA) method for denoising raw EEG signals based on word imagination, which will be used for word classification on unspoken speech. The electroencephalogram (EEG) signals are signals that represent the electrical activities of the human brain when someone is doing activities, such as sleeping, thinking or other physical activities. EEG data based on the word imagination used for the research is accompanied by artifacts, that come from muscle movements, heartbeat, eye blink, voltage and so on. In previous studies, the ICA method has been widely used and effective for relieving physiological artifacts. Artifact to signal ratio (ASR) is used to measure the effectiveness of ICA in this study. If the ratio is getting larger, the ICA method is considered effective for clearing noise and artifacts from the EEG data. Based on the experiment, the obtained ASR values from 11 subjects on 14 electrodes amounted are within the range of 0,910 to 1,080. Thus, it can be concluded that ICA is effective for removing artifacts from EEG signals based on word imagination.</span>

As an important factor in the fast fixed-point algorithm of independent component analysis (ICA), noise has a significant influence on the separate performance of ICA. Unfortunately, the traditional algorithm of noisy ICA did not address the influence of impulsive components. Because the sources were signals mixed with impulsive noise, the Gaussian noisy algorithm will be invalid for separating the sources. In general, those measurements that significantly deviate from the normal pattern of sensed data are considered impulses. In this paper, we introduce a non-linear function based on the S-estimator to identify the impulsive components in the observed data. This approach guarantees that the impulse noise can be detected from the observed signal. Furthermore, a threshold for the impulse components and methods to remove impulse noise and reconstruct the signal is proposed. The proposed technique improves the separate performance of the traditional algorithm for Gaussian noisy ICA. With the proposed method, the fast fixed-point algorithm of ICA is more reliable for noisy situations. The simulation results show the effectiveness of the proposed method.

Current analytical techniques applied to functional magnetic resonance imaging (fMRI) data require a priori knowledge or specific assumptions about the time courses of processes contributing to the measured signals. Here we describe a new method for analyzing fMRI data based on the independent component analysis (ICA) algorithm of Bell and Sejnowski ([1995]: Neural Comput 7:1129-1159). We decomposed eight fMRI data sets from 4 normal subjects performing Stroop color-naming, the Brown and Peterson work/number task, and control tasks into spatially independent components. Each component consisted of voxel values at fixed three-dimensional locations (a component "map"), and a unique associated time course of activation. Given data from 144 time points collected during a 6-min trial, ICA extracted an equal number of spatially independent components. In all eight trials, ICA derived one and only one component with a time course closely matching the time course of 40-sec alternations between experimental and control tasks. The regions of maximum activity in these consistently task-related components generally overlapped active regions detected by standard correlational analysis, but included frontal regions not detected by correlation. Time courses of other ICA components were transiently task-related, quasiperiodic, or slowly varying. By utilizing higher-order statistics to enforce successively stricter criteria for spatial independence between component maps, both the ICA algorithm and a related fourth-order decomposition technique (Comon [1994]: Signal Processing 36:11-20) were superior to principal component analysis (PCA) in determining the spatial and temporal extent of task-related activation. For each subject, the time courses and active regions of the task-related ICA components were consistent across trials and were robust to the addition of simulated noise. Simulated movement artifact and simulated task-related activations added to actual fMRI data were clearly separated by the algorithm. ICA can be used to distinguish between nontask-related signal components, movements, and other artifacts, as well as consistently or transiently task-related fMRI activations, based on only weak assumptions about their spatial distributions and without a priori assumptions about their time courses. ICA appears to be a highly promising method for the analysis of fMRI data from normal and clinical populations, especially for uncovering unpredictable transient patterns of brain activity associated with performance of psychomotor tasks.

The independent component analysis (ICA) in blind source separation (BSS) is introduced. A fast ICA algorithm is proposed. In contrast to most blind source separation algorithms, the method does not need to calculate higher order statistics. A pre-whitening procedure is performed to de-correlate the sensor signals before extracting vectors. The proposed method is used to remove the ECG artifacts from clinical ECG signals successfully.

The purpose of this paper is to contrast, in terms of standard criteria for statistical independence, cumulant-based methods of independent component analysis (ICA) with a potentially more robust blind signal separation technique called BLISS. This is able to separate independent non-Gaussian co-channel signals from multisensor data using only the joint probability distributions of instantaneous linear mixtures of those signals. BLISS is also able, without prior array calibrations or training waveforms, to estimate individual steering vectors including unknown mutual coupling and multipath. We point out fundamental reasons for the difficulty of comparing the performance of different ICA algorithms on finite duration practical data. We also propose a novel method for applying real-valued ICA to complex-valued data. By separately estimating in-phase and quadrature un-mixing parameters, we avoid the difficulty of selecting a subset of real and complex-valued cumulants. To justify our approach, we extend the definition of independence to the complex-valued case.

In special application scenarios, such as portable anesthesia depth monitoring, portable emotional state recognition and portable sleep monitoring, electroencephalogram (EEG) signal acquisition equipment is required to be convenient and easy to use. It is difficult to remove electrooculogram (EOG) artifacts when the number of EEG acquisition channels is small, especially when the number of observed signals is less than that of the source signals, and the overcomplete problem will arise. The independent component analysis (ICA) algorithm commonly used for artifact removal requires the number of basis vectors to be smaller than the dimension of the input data due to a set of standard orthonormal bases learned during the convergence process, so it cannot be used to solve the overcomplete problem. The empirical mode decomposition method decomposes the signal into several independent intrinsic mode functions so that the number of observed signals is more than that of the source signals, solving the overcomplete problem. However, when using this method to solve overcompleteness, the modal aliasing problem will arise, which is caused by abnormal events such as sharp signals, impulse interference, and noise. Aiming at the above problems, we propose a novel EEG artifact removal method based on discrete wavelet transform, complete empirical mode decomposition for adaptive noise (CEEMDAN) and ICA in this paper. First, the input signals are transformed by discrete wavelet (DWT), and then CEEMDAN is used to solve the overcomplete and mode aliasing problems, meeting the a priori conditions of the ICA algorithm. Finally, the components belonging to EOG artifacts are removed according to the sample entropy value of each independent component. Experiments show that this method can effectively remove EOG artifacts while solving the overcomplete and modal aliasing problems.

Constrained independent component analysis (ICA) is an effective method for solving the blind source separation with a prior knowledge. However, most constrained ICA algorithms are proposed for the real-valued sources. In this paper, a novel constrained noncircular complex fast independent component analysis (c-ncFastICA) algorithm based on the fixed-point learning is proposed to address the complex-valued sources. The c-ncFastICA algorithm uses the augmented Lagrangian method to obtain a new cost function and then utilizes the quasi-Newton method to search its optimal solution. Compared with other ICA and constrained ICA algorithms, c-ncFastICA has better separation performance. Simulations confirm the effectiveness and superiority of the c-ncFastICA algorithm.

We apply the independent component analysis (ICA) algorithm to uncover intrinsic noise in the beam position monitor (BPM) system. Numerical simulations found that ICA is efficient in the BPM noise estimation. The ICA algorithm is applied to the turn-by-turn data at the Relativistic Heavy Ion Collider. We found the distribution of the BPM noise level, which is consistent with the Johnson-Nyquist thermal noise model. The ICA analysis of turn-by-turn data can be used in neuronetwork feasibility of monitoring a storage ring parasitically.

Micro-Doppler features can be regarded as a unique signature of an object with movements and provide additional information for classification, recognition and identification of the object. Independent component analysis (ICA) can decompose micro-Doppler features into independent basis functions that represent salient physical movement attributes of the object. To study ICA of micro-Doppler features, we used a dataset generated by simulation of radar returned signals from rotating objects and tumbling objects. Fast ICA algorithm was used in our study to decompose micro-Doppler features into a set of spatial and temporal independent components. Spatial characteristics of the independent components combined with the corresponding temporal characteristics can be used to improve performance of classification, recognition and identification.