A Parallel Finite-Element Solution of Transient Electromagnetic Diffusion Equation

The finite difference time domain method and finite element methods have proven to be highly effective techniques for the full wave analysis of microwave circuits and resonators. The finite difference time domain (FDTD) method is highly efficient, explicit and parallelizable. Finite element methods have been used in the frequency domain and in the time domain using implicit methods. Implicit methods require a solution of a linear system of equations at each time step. For the finite element time domain (FETD) algorithm to be competitive with the FDTD, the number of time iterations required for a simulation must be significantly less. An unconditionally stable FETD algorithm is used. The variational formulation is based on the vector wave equation. Unconditional stability is achieved by using a modified Newmark-Beta time integration technique. In addition, this algorithm is implemented on parallel message passing computers using a finite element tearing and interconnecting scheme. Some numerical examples based on cavity resonator problems are presented to demonstrate the efficiency and accuracy of the method and the parallel efficiency of the algorithm.

In this paper, a hybrid algorithm of explicit finite-element time-domain (FETD) and finite-difference time-domain (FDTD) methods with a large time step is proposed. The FETD method based on the unstable modes filtering (UMF-FETD) is adopted in the region involving fine structures while the FDTD method is employed in the other region. The proposed hybrid algorithm reduces the scale of the system matrix in UMF-FETD and guarantees that the whole calculation region adopts the uniform, large time step. The result proves the good ability of the proposed hybrid algorithm.

A hybrid scheme for time-domain electromagnetic simulations, combining the explicit finite-difference time-domain (FDTD) method and the implicit finite-element time-domain (FETD) method, is developed. In the hybrid method, the FETD part uses the unconditionally stable Crank-Nicholson method; while the standard FDTD part employs staggered Cartesian grid for spatial discretization and the leap-frog scheme for time stepping. Non-conforming meshes are allowed between the FETD and the FDTD sub-domains. The hybrid method takes advantages of the modeling flexibility of the FETD method for complex structures and the efficiency of the FDTD method for simple structures. The hybrid implicit-explicit time stepping scheme allows time steps as long as the stability limit for the FDTD method, which can be much larger than the stability criterion of the explicit FETD scheme with small elements. Numerical examples demonstrate the efficiency of the proposed method.

In order to analyze the switching transient electromagnetic fields generated by the aerial busbars in substation, the one-dimensional (1-D) time domain finite element (TDFE) method is presented to analyze the transient wave process in multi-conductor transmission lines (MTLs) with branches. Based on the Pade's approximation and on Prony's method, the iterative equations of the aerial MTLs are reported. Iterative formulae are also presented to determine the boundary conditions at the nodes of the branches in this paper. The proposed method avoids the Gibbs effect of the finite difference time domain (FDTD) method. An aerial busbars model in a 500 kV substation is analyzed when circuit breakers and disconnect switches are closed. The numerical results are in good agreement with those calculated by Bergeron's method and FDTD method.

A new 3-D domain decomposition based hybrid finite-difference time-domain (FDTD)/finite-element time-domain (FETD) method is introduced to facilitate electromagnetic modeling by exploiting both the computational efficiency of FDTD and the meshing flexibility of FETD. The proposed hybrid method allows the FETD mesh and the FDTD grid to be nonconformal based on domain decomposition technique. It implements the hybridization with a buffer zone, which functions as a transition region between FDTD and FETD. The buffer zone helps the proposed hybrid method obviate the interpolation approach for field coupling of the nonconformal mesh and hence overcome the late-time instability issue. The discontinuous Galerkin method is utilized to couple different regions, thus improving the coupling accuracy compared with that using the Dirichlet boundary condition. Moreover, the hybrid method allows further division of the FETD region into multiple subdomains when the degrees of freedom in this region are large. For temporal discretization, a global leapfrog time integration scheme is implemented to sequentially update the fields in the FDTD, buffer, and FETD regions. The numerical results are shown to demonstrate the meshing flexibility and computational efficiency of the proposed hybrid method inherited from FETD and FDTD methods.

The purpose of this work is to compute the electromagnetic fields generated by lightning return stroke using the TDFE (time domain finite element) method. Using the TL (transmission line) lightning return stroke model, the point-matched TDFE method is used to solve the telegraph equations that represent the line dynamic behavior, and the electromagnetic fields at ground level are computed using the dipole method. The results show the advantages of the TDFE method, where the channel boundary conditions and transmission line parameters are easy to compute using a very small code and processing time.

The discrete origin of FETD-Newmark late time instability, and a correction scheme

Utilizing the knowledge of the singular behavior of the fields at a three‐dimensional corner, a simple algorithm is derived to account for the singularities in the numerical computations using the time domain finite difference or finite element methods. It is shown that the effects of the singularities have strong local effect near the corners or wedges for scattering problems.

Chapter 8 - Finite-Element Time Domain Method

In this paper, an efficient algorithm for implementing Crank-Nicolson scheme in the finite-element time-domain (FETD) method is presented. Based on a direct discretization of the first-order coupled Maxwell curl equations, this algorithm employs edge elements (Whitney 1-form) to expand the electric field and face elements (Whitney 2-form) for the magnetic field. Since the curl of an edge-element is the linear combination of those face elements whose faces contain the given edge, only the Maxwell-Ampere equation composes a sparse linear matrix equation for the electric field update; the Maxwell-Faraday equation is explicit. The Crank-Nicolson scheme is implemented leading to an unconditionally stable vector FETD method and the matrix inverse is not required to be computed explicitly. Therefore, only one matrix equation is required to be solved at each time step. Numerical results demonstrate that the proposed method is efficient when compared with the conventional leap-frog mixed FETD method and the Crank-Nicolson FDTD method.

A finite-element time-domain (FETD) method for solving Maxwell's equations was developed by combining prism-based edge elements with central differencing in the time domain. This method solves for the electric field as a vector function of space and time in finite cylindrical cavity geometries of arbitrary geometry. Two stability analyses of this method are performed using the growth factor technique and the Z-transform. Furthermore, the computational complexity of the present approach is also investigated, This method has been implemented and its validity tested by studying the resonant frequencies of various microwave cavities.

This paper deals with recent progress in diagnosis of electric power apparatus using non-conventional partial discharge (PD) measurements; i.e. acoustic signal detection method, electromagnetic wave detection method, and transient earth voltage (TEV) detection method. The author describes simulation technology of electromagnetic (EM) wave propagation and induced surface current, and acoustic wave propagation by PD using finite difference time domain (FDTD) method and finite element method (FEM) for understanding and visualization of the phenomena. Diagnosis and reliability evaluation are also described based on the understanding of the PD induced electromagnetic and acoustic waves propagation, and surface current generated in high voltage equipment such as gas insulated switchgear (GIS), and oil-filled transformers.

The site-specific radio wave propagation prediction in outdoor is increasingly important for electromagnetic interference analysis. Since the outdoor environment is usually very complex and electrically large, the shooting and bouncing ray (SBR) method (one technique of ray tracing) rather than other numerical methods such as finite difference time domain method and finite element method, is often applied in the computation. However, a large amount of rays have to be launched to guarantee the accuracy in conventional ray tracing methods. This, in turn, increases the simulation time significantly. Recently, many acceleration algorithms have been reported including space partitioning and wavefront decomposition. This paper presents a novel adaptive ray launching (ARL) method based on the pattern of transmitting antenna, which reduces the launched ray number significantly while maintaining the computation accuracy

The numerical dispersion is one of the main factors to affect the accuracy of the finite-difference time-domain (FDTD) method. It can be easy to be taken for granted that a smaller time step leads to smaller simulation errors. This paper reveals that smaller time steps do not always make more accurate results in FDTD simulations. We analytically investigated how time steps affect the numerical dispersion of two FDTD methods: the leapfrog FDTD(2,2) method and the FDTD(2,4) method. The investigations in this paper show that in the FDTD(2,2) method, a larger time step limited by the Courant-Friedrichs-Lewy (CFL) condition is more helpful to reduce the numerical dispersion error. However, in the FDTD(2,4) method, as the time step grows, the numerical dispersion error decreases at the beginning and then increases. Several numerical examples are carried out to verify our analysis.

Simulation of ground penetrating radar on dispersive media by a finite element time domain algorithm