A Polynomial-Based Key Distribution Approach for Wireless Sensor Networks

Key establishment is the basic step for the wireless sensor network (WSN) security. The polynomial based key predistribution scheme of Blom and Blundo et al. has been the basic ingredient for the key establishment for WSNs. It is tempting to use many random and different instances of polynomial based key predistribution scheme for various parts of the WSN to enhance the efficiency of WSN key establishment protocols. This paper indicates that it is not secured in general to use many instances of Blom-Blundo et al. polynomial based key predistribution scheme in a WSN key establishment protocol. Thus the previously constructed group-based type WSN key predistribution schemes using polynomial based key predistribution scheme are insecure. We propose new generalized Blom-Blundo et al. key predistribution schemes. These new generalized Blom-Blundo et al. key predistribution schemes can be used many times in one WSN key establishment protocol with only a small increase of cost. The application to group-based WSN key predistribution schemes is given.

Energy efficiency is a critical problem for wireless sensor networks. In past decades, network coding has been proved as a promising technology to reduce the number of transmissions, save energy, and improve network throughput, especially suitable for the wireless network that motivates the emergence of network coding aware routings. However, existing network coding aware routings have the failure decoding problem, because of defective network coding conditions. On the other hand, existing network coding aware routings usually consider the ideal traffic scheduling and neglect nodes’ energy and load which are important to wireless sensor networks. Therefore, it is not appropriate to directly apply existing network coding aware routings in wireless sensor networks. Regarding the problems above problems, this paper proposes traffic-shaped network coding aware routing (TSCAR) for wireless sensor networks. In the TSCAR, a universal network coding condition is presented to solve the false decoding problem. And traffic shaping mechanism is proposed to shape the traffic of different flows to create more coding actions when coding opportunities exist. In addition, network calculus is used to analyze the delay of the TSCAR. Besides, a coding, load, and energy aware routing metrics are proposed to evaluate the discovered paths. Extensive simulation results demonstrate that the TSCAR increases the number of coding opportunities and the proportion of coded packets, improves network throughput, and extends the network lifetime of wireless sensor networks.

Problem statement: The Wireless Body Area Sensor Networks (WBASNs) is a wireless network used for communication among sensor nodes operating on or inside the human body in order to monitor vital body parameters and movements. This study surveys the state-of-the-art on Wireless Body Area Networks, discussing the major components of research in this area including physiological sensing and preprocessing, WBASNs communication techniques and data fusion for gathering data from sensors. In addition, data analysis and feedback will be presented including feature extraction, detection and classification of human related phenomena. Approach: Comparative studies of the technologies and techniques used in such systems will be provided in this study, using qualitative comparisons and use case analysis to give insight on potential uses for different techniques. Results and Conclusion: Wireless Sensor Networks (WSNs) technologies are considered as one of the key of the research areas in computer science and healthcare application industries. Sensor supply chain and communication technologies used within the system and power consumption therein, depend largely on the use case and the characteristics of the application. Authors conclude that Life-saving applications and thorough studies and tests should be conducted before WBANs can be widely applied to humans, particularly to address the challenges related to robust techniques for detection and classification to increase the accuracy and hence the confidence of applying such techniques without physician intervention.

Wireless Sensor Network is greatly evolved in recent years. Technological advancements in wireless networks are intended to develop various fields especially in medical domain. Nowadays, remote health monitoring is possible by the enormous growth of wireless body area sensor networks. The Wireless Body Area Sensor Network monitors the human health by using wearable body sensors, and sends the status of the human health to the medical experts. Body nodes will be placed on, in and around the human body. The major key issue in Wireless Body Area Sensor Network is power management. Since batteries used in sensors are very tiny, it tends to have a minimal lifetime. In order to increase the lifetime of the sensor node, the energy needs to be utilized in an efficient manner. In this paper we have proposed conditional re-transmission technique to minimize the energy consumption. So the sensor nodes lifetime will get increased and in turn Wireless Body Area Sensor Networks lifetime will also be increased. By increasing the lifetime of the sensor nodes, the batteries or sensor nodes need not to be replaced frequently.

Wireless Sensor Networks (WSNs) have emerged as perhaps the most important networking paradigm of recent times, both in terms of their commercial potential and also from a scientific point of view. WSNs are important commercially because of their many applications, spanning from civil to military applications such as structural monitoring of bridges, monitoring of wildlife, tracking of contaminants in the soil and atmosphere. Some of these applications have already proved to be commercially viable and indeed financially very attractive. WSNs are also very important from a scientific point of view, because of their unique features with respect to other types of wireless networks: nodes are typically immobile, and are required to carry a specific type of traffic (which is advantageous), have extreme restrictions on the energy they consume, the processing power they have, and the antennas they can use (which is disadvantageous); in addition, the data created at different sensors may be strongly correlated, which can be beneficial but requires only good algorithms that take advantage of it. Therefore, in the last few years we have experienced an important shift in research activities, moving from general purpose wireless networks to more focused topics specifically on WSNs, taking into account their specific advantages and peculiarities. An important recurring theme in research in this field is the need for energy efficiency, which is the thread of this special issue. The papers which appear in this issue have been carefully selected from the best IEEE PIMRC 2008 conference papers addressing the issue of energy efficiency in WSNs. The respective authors have been asked to provide a significantly extended version of the conference paper, which has subsequently undergone a rigorous review process according to the IJWIN publication standards prior to acceptance. The final set of papers addresses issues at physical, medium access control and networking layers, and to some extent at the application layer. All of these papers take into account the unique peculiarities, advantages, and shortcomings of wireless sensor networks, and propose algorithms and analyses that significantly advance research in the field. We sincerely hope you will enjoy reading them as much as we did. The author of the first paper ‘‘Power Management and Data Rate Maximization in Wireless Energy Harvesting Sensors’’ by Chandra R. Murthy, deals with the problem of power management and throughput maximization for energy neutral operation when using increasingly important but so far rarely analyzed Energy Harvesting Sensors (EHS) to send data over wireless links. The EHS is assumed to be able to harvest energy at a constant rate, and use a fixed part of the energy harvested in a slot for measuring the channel state. The rest of the harvested energy is available for transmission, but it can also be stored in an Wireless Sensor Networks (WSNs) have emerged as perhaps the most important networking paradigm of recent times, both in terms of their commercial potential and also from a scientific point of view. The papers that appear in this issue have been carefully selected from the best IEEE PIMRC 2008 conference papers which addressed the issue of energy efficiency in WSNs. The final set of papers addresses issues at physical, medium access control, networking and to some extend application layers. All of these papers take into account the unique peculiarities, advantages, and shortcomings of wireless sensor networks, and propose algorithms and analyses that significantly advance research in the field. Note that this activity has been partly supported by the NoE-216715 NEWCOM++.

Wireless network of wearable biomedical sensors by human body shows great potential to enhance the biometrics performance significantly. Meanwhile, it poses prominent characteristics and challenges to physicians and engineers for its particular medical application as compared to other application of wireless sensor networks (WSN). Mobility pattern plays an important role in designing the wireless body sensor networks (WBSN) and will also affect the accuracy of modeling WBSN in health care application. Much of the mobility scenarios generated in current work of wireless body sensor networks has used fairly simple models to generate the mobile topological graph, which bear little resemblance to the actual mobility patterns. This paper is the first attempt to investigate the mobility model in WBSN based on the existing mobility models in wireless data networks and ad hoc networks. We first briefly review the existing mobility models in related research areas such as wireless ad hoc network and cellular networks. Further on, we propose a dedicated and more realistic mobility model named BAMM (Body Area Mobility Model) for wireless body sensor networks by concentrating on the unique characteristics of WBSN and finally study the effects of mobility on the performance of WBSN by simulation experiments.

It has been shown that network coding can lead to significant improvement in network capacity and reduction in power consumption for multicast traffic in wireless networks. In this paper, we study the problem of supporting multicast in wireless sensor networks. The objective is to jointly maximize the network lifetime and minimize the number of packets undergoing network coding. We formulate the problem of establishing coding subgraph in the network as a linear programming problem, which is suitable for distributed implementation. We propose a new set of information flow variables, which enables us to determine the rate of performing network coding. Simulation results show that the network lifetime achieved by our proposed scheme is 20% higher than the maximum lifetime Steiner tree algorithm.

Wireless sensor networks (WSNs) are novel large-scale wireless networks that consist of distributed, self organizing, low-power, low-cost, tiny sensor devices to cooperatively collect information through infrastructure less wireless networks. These networks are envisioned to play a crucial role in variety of applications like critical military surveillance applications, forest fire monitoring, commercial applications such as building security monitoring, traffic surveillance, habitat monitoring and smart homes and many more scenarios. Node capture attack is one of the most dreadful security attack exist in wireless sensor networks. An adversary steals cryptographic key or other confidential information like node’s id etc from a captured node to compromise entire network. So, Security of wireless sensor network is an important issue for maintaining confidentiality and integrity of wireless links. Now-a-days, researchers are paying attention towards developing security schemes against Node capture attack. Our survey provides deep insights of existing techniques that enhance the attacking efficiency of the node capture attack in wireless sensor network. It also analyzes various detection and key predistribution schemes for inventing a new scheme to improve resilience against node capture attack.

Key establishment is a fundamental security issue in wireless sensor networks (WSN). It is the basis to establish the secure communication using cryptographic technologies between sensor nodes. Due to the current resource constraints on sensors, it is infeasible to use traditional key management techniques such as public key cryptography or key distribution center based protocols. So the key predistribution schemes are paid most attention in key management of WSN. To establish pairwise keys securely and meanwhile prevent a number of compromised colluding nodes from breaking the pairwise key shared by any two innocent nodes, we propose an enhanced polynomial-based key establishment scheme (EPKES) for WSN. In EPKMS, we introduce an auxiliary set to improve the security level compared to previous schemes. The results of performance evaluations show that our proposed scheme has a good key connectivity, scalability, direct key establishment, resilience to nodes capture and storage consumption.

One of the remarkable challenges in the area of Wireless Sensor Networks (WSNs) is how to route the collected data and transfer them in the nodes. Due to the high rate of packet loss, guaranteeing reliable and efficient packet transfer and delivery is considered to be one of the hot issues in the area of WSNs. Indeed, due to energy limitation of nodes in WSNs, reliability and energy are regarded as critical parameters in these networks. In this paper, a method has been proposed for optimizing the parameters of reliability and energy consumption in multimedia WSNs. In the proposed protocol, Increasing the Delivery Ratio with Network Coding (IDRNC) a network coding mechanism has been used for transmitting data which enhances the reliability of the network. Furthermore, reducing the number of transmissions and receptions in network nodes results in the reduction of energy consumption. In the proposed protocol, the transmitted packets are first coded and transmitted to the sink through the shortest route. In the middle of the route, in case packets are lost, median nodes can detect and recover the lost packet through the coded packet. The simulation results indicated that the method proposed in this study operates better than the LIEMRO method with respect to the following features: system efficiency, average remaining energy of the network, the number of lost packets and reliability. Keywords: Multipath Routing, Network Coding, Reliability, Wireless Multimedia Sensor Networks (WMSNs)

Monitoring of water sources is a major concern worldwide. Wireless sensor networks (WSN) may be used for this monitoring. However, current systems employ mainly physical sensors for variables such as temperature, pressure, humidity and light. Wireless chemical sensors networks (WCSNs) for environmental monitoring are scarce due to the lack of autonomy of conventional sensors. This paper presents results of a WCSN for monitoring pH based on ion selective field effect transistors (ISFETs). Sensing nodes employ a human interface required for in situ calibration of chemical sensors. Unlike most studies, our work evaluates the network employing chemical measurements and wireless network metrics. Results show zero packet losses by using a time division multiple access (TDMA) protocol. The network allows wireless communication within 300m including attenuation from buildings and trees. Therefore, the system presented in this paper is suitable for long range applications with unobstructed line of sight. pH measurements present a standard deviation below 1%, showing high repeatability. When compared to a commercial pH meter, difference in measurements is below 5%. As a consequence, accuracy is adequate for the application. Measurements also presented high stability during 3 h of continuous measurement.

The technique of multipoint relays (MPRs) has proved its efficiency to optimize network flooding in mobile ad hoc networks (MANETs) and wireless sensor networks. Indeed, the number of redundant retransmissions of a message broadcast in a wireless network is reduced by ensuring that only a subset of nodes selected as multipoint relays are allowed to forward the received packets. The aim of this paper is to provide an efficient solution for broadcasting in a geographical area of a mobile ad hoc network or a sensor network. For this, we define several solutions based on MPRs and compare their respective performances with regard to an optimal solution. Unfortunately, this optimal solution cannot be implemented. A solution is constituted by two modules: the first one deals with MPR selection and the second one defines the strategy for forwarding the received information. We then present an example of application in a sensor network structured in various zones. Each zone is controlled by a robot in charge of replacing failed sensors. We evaluate the benefit brought by our solution in this specific context.

In wireless sensor networks, sensor nodes are limited in memory, battery power and computational power. Wireless Sensor Networks (WSN) are a specific category of wireless adhoc networks where their performance is highly affected by application, lifetime, storage capacity, topology changes and the communication medium and bandwidth. Whenever the traffic load in the network increases, buffer at a node becomes full and it cannot handle any more data packets. This causes packet loss and retransmission which affects delivery ratio, energy and decreases network lifetime. Congestion is an important issue in wireless networks. Congestion in WSN severely affects loss rate, channel quality, the number of retransmissions, traffic flow, network lifetime, delay, energy as well as throughput. The congestion can be resolved in WSN either by reducing the data rate or by increasing the resources to form alternative paths. In this paper, an Implementation of Improved TOPSIS Method for congestion control in WSN known as Improved Hierarchical tree Alternative path protocol has been proposed which provides an improved performance over the basic HTAP protocol.

ABSTRACTThe clock in embedded systems usually is driven by a crystal oscillator and implemented via a counter register, such a crystal clock is non-identical and drifting due to the manufacturing tolerance and variation of working conditions. Thus, a common time among distributed wireless sensor nodes, also referred to as Time Synchronization, is required for many time-sensitive wireless applications, such as collaborative condition monitoring, coordinated control and localization. Inspired by fireflies’ behaviour, the Pulse-Coupled Oscillators (PCO) has been proposed for synchronization in complex networks. Since the concurrent transmission of PCO’s Pulses is impossible in Wireless Sensor Networks (WSNs), the desynchronization mechanism is adopted to ensure the implementation of PCO in WSNs. Moreover, due to the uncertainties in radio channels and the complexities of communication protocols and packet-exchange behaviours in wireless networks, it is challenging to have a closed-form solution to the performance of PCO synchronization in WSNs. The realistic software simulation, in particular, the discrete event simulator has been a powerful tool to exam the performance of communication protocols in various scenarios, since an order sequence of well-defined event in time is to represent the behaviour of a complex system. This paper presents the development of a pulse-coupled oscillators time synchronization simulator on the OMNeT++ platform for simulating and studying its behaviour and performance in sensor networks. A clock module with configurable phase and frequency noises, and adjustable and higher resolution is developed to mimic various crystal oscillators in embedded systems, for example, the real-time clock. The developed simulator also supports the full functions devices defined by ZigBee protocol, which allows realistic simulation of multi-hop IEEE 802.15.4 wireless networks. Finally, the intensive simulations of classical PCO with the refractory period in IEEE 802.15.4-based WSNs have been carried out to demonstrate the features and benefits of the developed simulator. It is shown that for the non-identical and time-varying PCO clocks in the WSNs, the achieved synchronization will lose gradually, and the time that maintained synchronization depends on the length of refractory period.

Error control coding improves reliability and efficiency of wireless communication systems. This research delves into the latest advancements in error control coding schemes for wireless communication systems, with a specific focus on their application within the domain of Low Power Wide Area Networks (LPWANs) such as Narrowband Internet of Things (NB-IoT) systems, LoRa energy-efficient hardware design, random access control systems, and wireless sensor networks. In the context of LPWANs, particularly NB-IoT systems, we investigate the adaptive coding and modulation (ACM) in NB-IoT systems, which adapts coding rates and modulation techniques to changing channel circumstances. Comprehensive analysis of the literature review shows that the proposed approaches are more energy efficient and less error-prone than fixed coding and modulation schemes. Using Cell Design Methodology (CDM), Single Error Correction (SEC) codes are optimized for energy efficiency. Power and energy efficiency have improved in standard CMOS and CDM logic systems. This impacts IoT devices, memory storage, and security systems. Next, Forward Error Correction (FEC) is examined for ALOHA-based random-access control systems wherein packet loss rate and spectral efficiency metrics are mathematically calculated. FEC is beneficial, especially when time and frequency synchronization diverge. Monte Carlo simulations studied in the literature shows that FEC improves satellite communication systems. This review establishes benefits of FEC, notably in satellite communications systems. In addition, Wireless Sensor Networks (WSNs) error control techniques and network reliability and performance are examined along with Convolutional, Turbo, Low density parity check codes(LDPC), and Polar error correction coding (ECC) methods. We learn about their benefits, drawbacks, and implementation challenges by assessing their efficacy, efficiency, and applicability in wireless sensor networks (WSN) applications. This study further highlights advancements of energy-efficient error control coding when, integrated into network designs alongwith the trade-offs between efficacy and intricacy to help improve wireless communication networks. Finally, this study summarizes current error control coding approaches for wireless communication systems. We provide insights into improving reliability, energy conservation, and efficacy by examining ACM, CDM, FEC, and error correction coding (ECC) across varied domains including LPWAN and IoT technologies with earnest hope to facilitate researchers, engineers, and professionals working in the field of error control coding in wireless communication.