A Practical Approach for Microphone Array Calibration in Augmented and Virtual Reality Applications

Extended-Reality Technologies: An Overview of Emerging Applications in Medical Education and Clinical Care.

Computational thinking (CT) skills are increasingly important in education to prepare students for the challenges of the digital age. Augmented Reality (AR) and Virtual Reality (VR) have been introduced as immersive technologies that have the potential to enhance CT skills through more interactive learning experiences. However, there is still a gap in understanding the effectiveness of these technologies in supporting the development of CT, particularly in different levels of education and disciplines. Although several studies have highlighted the benefits of AR and VR in education, no systematic review integrates these findings to identify advantages, challenges, and opportunities for further implementation. Therefore, this study conducted a systematic review based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines by analyzing 25 empirical studies (AR=17, VR=8) obtained from the Scopus database (2008-2024). The analysis addresses four key research questions: (1) the current state of AR/VR in CT development, (2) their advantages, (3) implementation challenges, and (4) future research directions. The results show that AR is more widespread than VR at various levels of education, with dominance in higher education followed by secondary and primary schools. Computer science is the main field of application of AR and VR, while AR is also widely applied in mathematics to increase interest and problem-solving. A total of 11 studies reported significant impacts of these technologies on CT, with AR being superior in increasing student motivation and engagement, as well as aiding in problem-solving and debugging. In contrast, VR provides a more immersive learning experience by strengthening concept understanding, especially in programming and recursion. However, several obstacles in the application of AR and VR, such as hardware limitations, costs, and user skills, affect the effectiveness of these technologies in the learning environment. This study also identified potential future research, including the exploration of VR in primary and kindergarten education, the application of VR in non-computer science fields, and the efficient use of these technologies in supporting the CT process. This study provides more precise insights into the optimal ways of utilizing AR and VR in developing CT skills. It is a reference for educators, policymakers, and researchers in supporting CT learning.

The rapid development of virtual and augmented reality technologies is currently taking place in almost all spheres of activity. Elements of virtual and augmented reality are used in such areas as education, medicine, transport, gaming, tourism and others. The active spread of these technologies causes the emergence of special competencies in the IT labor market and, as a result, the formation of new professions.Many Russian universities are training students in IT training areas. Specialization in the development of computer games and virtual reality applications has begun recently. The provision of practical classes is accompanied by specific tasks, which gives students the opportunity to improve the use of software and technical devices.The relevance of the research is determined by the current demand for the use of the latest technologies by IT developers in the field of creating computer games. Today, technologies that provide a player’s immersion in virtual reality are becoming more and more popular. One of these technologies is a suit with wearable sensors that track a person’s position in space in real time. However, there are quite a few real described projects in the literature and on the Internet. This study examines the process of developing a task for creating a game application using virtual reality technology: a suit with wearable sensors for teaching students.Materials and methods of research. Timely identification of the needs of the IT market in personnel training allows educational organizations to form new training programs of different levels of training. This approach makes it possible to target the educational and methodological materials being developed to use the latest achievements in the development of the field under study.Using a systematic approach, the study characterizes virtual reality suits and sensors for monitoring the position in the user’s space. Thus, the goal of the task was to ensure the immersiveness and convenience of interaction between the player and the game environment.Based on materials on software, position sensors in space, the approach of pedagogical design was applied and the procedure was formed for a practical task, reflecting the relevant competencies.Results. The study was conducted on the basis in the framework of laboratory and practical work of students, as well as at a real enterprise. Training in the new profile of the direction of training “Applied informatics” is fully equipped with all the latest technologies in this field. As a result of the work, the content of the practical task was developed.Real development of virtual and augmented reality applications is conducted jointly with students. Almost all projects used a suit with body sensors.Conclusion. Our study examines in detail the process of developing an application using a suit with wearable sensors for further training of students. Based on the results, work can be carried out on real projects for any field. Based on the research materials, it is planned to issue a textbook for students with the profile of developing computer games and virtual / augmented reality applications.

There is a growing interest for the broad use of Augmented Reality (AR) and Virtual Reality (VR) in the fields of bioinformatics and cheminformatics to visualize complex biological and chemical structures. AR and VR technologies allow for stunning and immersive experiences, offering untapped opportunities for both research and education purposes. However, preparing 3D models ready to use for AR and VR is time-consuming and requires a technical expertise that severely limits the development of new contents of potential interest for structural biologists, medicinal chemists, molecular modellers and teachers. Herein we present the RealityConvert software tool and associated website, which allow users to easily convert molecular objects to high quality 3D models directly compatible for AR and VR applications. For chemical structures, in addition to the 3D model generation, RealityConvert also generates image trackers, useful to universally call and anchor that particular 3D model when used in AR applications. The ultimate goal of RealityConvert is to facilitate and boost the development and accessibility of AR and VR contents for bioinformatics and cheminformatics applications. http://www.realityconvert.com. dfourch@ncsu.edu. Supplementary data are available at Bioinformatics online.

The perceptual behavior of consumers on a product displayed in the market has a vital role in analyzing the importance given to that product. Therefore, various strategies have been developed to understand this consumer behavior in the selection of products. Immersive technologies like virtual, augmented, and mixed reality are among them. With the foremost feature of immersion in the virtual world and interaction of users with virtual objects, virtual reality, and augmented reality have unlocked their potential in research and a user-friendly tool for analyzing consumer behavior. In addition to these technologies, mixed reality also has a significant role in investigating consumer behavior. Studies on immersive technologies in food applications are vast, hence this review focuses on the applications of virtual, augmented, and mixed reality in the food selection behavior of consumers. The behavioral studies are elicited to develop new products based on consumer needs, to understand the shopping behavior in supermarkets for real-time usage, and to know the influence of emotions in a selection of products. The findings suggest that virtual, augmented, and mixed reality induce immersion of the users in food selection behavioral studies. Information on the technological advancements in the tools used for bringing immersion and interaction are discussed for its futuristic applications in food. Though immersive technology gives users a realistic virtual environment experience, its application in food systems is in the budding stage. More research on human response studies would contribute to its innovative and inevitable application in the future.

Purpose: This study investigates the transformative role of augmented reality (AR) and virtual reality (VR) technologies in e-commerce and digital marketing. It aims to understand how these immersive technologies enhance consumer experiences by addressing challenges such as product visualization, consumer trust, and engagement while fostering higher purchase intent and customer satisfaction. Design/Method/Approach: A systematic literature review synthesizes findings from empirical and theoretical studies published between 2011 and 2024. The methodologies analyzed include experimental designs, market analyses, and conceptual frameworks assessing the integration of AR and VR technologies in online retail. Findings: The findings indicate that AR enhances online shopping through features such as virtual try-ons and spatial placement visualization, reducing return rates and increasing purchase confidence. VR, on the other hand, provides immersive environments that simulate physical shopping experiences, strengthening consumer-brand connections. While AR demonstrates broader applicability in fostering interactive and personalized experiences, VR remains limited by accessibility and cost constraints. Both technologies exhibit immediate costs but offer long-term benefits, positively influencing conversion rates and customer loyalty. Theoretical Implications: This study contributes to consumer behavior research by applying value perception models, immersive technology frameworks, and engagement metrics to the e-commerce landscape. It refines existing theoretical perspectives on technological adoption by highlighting the interplay between sensory engagement, emotional connection, and consumer decision-making. Practical Implications: The research underscores the strategic importance of integrating AR and VR into digital marketing and e-commerce platforms. It suggests leveraging AR for product categories requiring spatial interaction and using VR for high-detail product exploration. The study provides actionable insights for businesses looking to enhance online shopping experiences through immersive technologies. Originality/Value: This study offers a comprehensive synthesis of AR and VR applications in e-commerce, highlighting their potential to reshape online shopping. By bridging the gap between physical and digital retail experiences, it provides a fresh perspective on how immersive technologies can drive engagement, accessibility, and personalized consumer interactions. Research Limitations/Future Research: While this study synthesizes existing literature, empirical validation through longitudinal studies and cross-industry applications is necessary. Future research should explore the long-term effects of AR and VR adoption on consumer trust, loyalty, and behavioral changes. Additionally, further exploration is encouraged into gamification, artificial intelligence (AI) integration, and demographic-specific implementations to drive sustainable engagement.

As technology advances, mobile devices have gradually turned into wearable devices. Furthermore, virtual reality (VR), augmented reality (AR), and mixed reality (MR) are being increasingly applied in medical fields such as medical education and training, surgical simulation, neurological rehabilitation, psychotherapy, and telemedicine. Research results demonstrate the ability of VR, AR, and MR to ameliorate the inconveniences that are often associated with traditional medical care, reduce incidents of medical malpractice caused by unskilled operations, and reduce the cost of medical education and training. What is more, the application of these technologies has enhanced the effectiveness of medical education and training, raised the level of diagnosis and treatment, improved the doctor-patient relationship, and boosted the efficiency of medical execution. The present study introduces VR, AR, and MR applications in medical practice and education with the aim of helping health professionals better understand the applications and use these technologies to improve the quality of medical care.

The visualization of medical images with advanced techniques, such as augmented reality and virtual reality, represent a breakthrough for medical professionals. In contrast to more traditional visualization tools lacking 3D capabilities, these systems use the three available dimensions. To visualize medical images in 3D, the anatomical areas of interest must be segmented. Currently, manual segmentation, which is the most commonly used technique, and semi-automatic approaches can be time consuming because a doctor is required, making segmentation for each individual case unfeasible. Using new technologies, such as computer vision and artificial intelligence for segmentation algorithms and augmented and virtual reality for visualization techniques implementation, we designed a complete platform to solve this problem and allow medical professionals to work more frequently with anatomical 3D models obtained from medical imaging. As a result, the Nextmed project, due to the different implemented software applications, permits the importation of digital imaging and communication on medicine (dicom) images on a secure cloud platform and the automatic segmentation of certain anatomical structures with new algorithms that improve upon the current research results. A 3D mesh of the segmented structure is then automatically generated that can be printed in 3D or visualized using both augmented and virtual reality, with the designed software systems. The Nextmed project is unique, as it covers the whole process from uploading dicom images to automatic segmentation, 3D reconstruction, 3D visualization, and manipulation using augmented and virtual reality. There are many researches about application of augmented and virtual reality for medical image 3D visualization; however, they are not automated platforms. Although some other anatomical structures can be studied, we focused on one case: a lung study. Analyzing the application of the platform to more than 1000 dicom images and studying the results with medical specialists, we concluded that the installation of this system in hospitals would provide a considerable improvement as a tool for medical image visualization.

This report introduces the reader to the concepts and applications of augmented and virtual reality in dentistry. Virtual reality (VR) is the computer-generated three-dimensional simulation of a virtual environment accessed through a headset. Augmented reality (AR) is the superimposition of computer-generated imagery or graphics onto the real world, accessed through phones, tablets and headsets. The technology has advanced in recent years with early applications to the medical field revolving around anxiety management, teaching and surgical planning. Uses for surgical orthognathic and other restorative interventions are also in an early phase of development and adoption. CPD/Clinical Relevance: VR and AR have promising applications, but more research must be carried out to determine the technology's validity in dentistry.

Numerous Studies and new applications like Google Expeditions or Anatomy 4D point to a great potential of Augmented and Virtual Reality for its use for educational purposes. However, related research concerning technology integration in the classroom has shown that a valuable medium alone does not automatically lead to its successful use. It is therefore the aim of the paper to present an approach by which competencies of pre-service teachers for a successful and appropriate integration of Augmented and Virtual Reality-applications in the classroom are fostered - the own design of Augmented and Virtual Reality applications. We will begin with a short discussion of prominent findings and related work in regard to teaching and learning with and about Augmented and Virtual Reality in the first part before introducing the main goals and aspects of the presented pedagogical concept and the seminar in the second part of the paper. In the third part, two applications created in the seminar and qualitative data from an explorative study based on focus group interviews and participant observation will be presented. We close with a discussion of our findings and an outlook to future work.

Virtual reality and augmented reality have the potential to enhance and widespread practical learning environments in professional courses efficiently in a cost-efficient manner by limiting the costs of real resources substituting them with fixed costs from.VR/AR applications with virtual resources. There are advantages in the learning process, as practical, active and visual learning methods are more efficient and virtual and augmented reality can digitalize these procedures and replicate them at scale with different degrees of virtualization. In this work we aim to provide a framework that allows the creation of VR and AR experiences for learning or training proposes in a serious environment adding gamification elements to keep user engaged in the learning/training process. In the process gamification adaptation to VR/AR environment is demonstrated in real applications. The learning tasks in this approach are not necessarily changed or take advantage of new forms of interactions and guidance but aim to be replicated in a blend between virtual and real environments. In this regard, we hope to advance gamification application to account for more elements, such as VR/AR interaction, digital twins and digital aids in a learning application. In this article we detail possible scenarios for the application of virtual reality and augmented reality combined with machine learning in serious games and learning scenarios.

As the use of virtual and augmented reality applications becomes more common, the need to fully understand how observers perceive spatial relationships grows more critical. One of the key requirements in engineering a practical virtual or augmented reality system is accurately conveying depth and layout. This requirement has frequently been assessed by measuring judgments of egocentric depth. These assessments have shown that observers in virtual reality (VR) perceive virtual space as compressed relative to the real-world, resulting in systematic underestimations of egocentric depth. Previous work has indicated that similar effects may be present in augmented reality (AR) as well.This paper reports an experiment that directly measured egocentric depth perception in both VR and AR conditions; it is believed to be the first experiment to directly compare these conditions in the same experimental framework. In addition to VR and AR, two control conditions were studied: viewing real-world objects, and viewing real-world objects through a head-mounted display. Finally, the presence and absence of motion parallax was crossed with all conditions. Like many previous studies, this one found that depth perception was underestimated in VR, although the magnitude of the effect was surprisingly low. The most interesting finding was that no underestimation was observed in AR.

A Mixed Reality (MR) application using an optical see-through headset was developed to assess short-term spatial memory. A study with 29 participants was conducted. Data from this study were compared to two previous studies using mobile Augmented Reality (AR) and Virtual Reality (VR) with headsets. When comparing the three technologies (MR, AR, VR) for the performance variables, there were no statistically significant differences for either the total number of correctly placed objects or the total number of attempts. However, the MR application required more time than the AR and VR applications in the evaluation phase and more time than the VR application in the learning phase. Our arguments for the longer time are the novelty of the MR application for the participants and the characteristics of the applications. The key results from the MR study include the following: (1) the objects used in the MR application were correctly positioned on a map, which implies that the memory acquired with the MR application is effectively transferred to the user's mental map; (2) for the performance variables, there were no significant differences in the results by gender; (3) and the usability rating decreased with computer experience. The results show that the MR application is effective for spatial memory assessment and was well rated by the participants. The three technologies, along with suitable hardware, are effective for spatial memory assessment. However, MR using optical see-through headsets offers advantages over mobile AR and VR using headsets, discussed in this publication.

This systematic review examines the role of augmented reality (AR) and virtual reality (VR) in enhancing communication for individuals who are hard of hearing. Following Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines, we conducted a comprehensive search across databases including PubMed, WoS, EMBASE, and IEEE. Of the 5,981 records initially identified, 22 studies met our inclusion criteria after screening. Most of these studies (68%) focused on nonverbal communication modalities using tools such as sign language and visual cues, while the remainder focused on verbal communication. A descriptive synthesis was used due to the expected diversity in study characteristics. Our assessment showed a substantial emphasis on educational impacts, speech perception, and cognitive skills development through AR and VR. The reviewed articles provide preliminary evidence on the efficacy of these technologies in teaching sign language, enhancing cognitive skills such as reasoning, and improving speech perception among the deaf or hard of hearing individuals. This review underscores the transformative potential of AR and VR in addressing communication challenges faced by individuals who are hard of hearing, emphasizing the need for further research with diverse, larger sample sizes to investigate these technologies for broader communication support.

This paper presents the development of a learning-teaching methodology, based on the application of virtual and augmented reality. Its aim is to develop a teaching system based on immersive technologies containing 3D virtual environments. Lack of specialized workspace can be partially conciliated with the use of simulators for different areas of knowledge. Technical contributions of researchers in engineering areas are considered. The quality of the methodological design is verified through virtual laboratory sessions in simulated environments. Benefits of having these spaces include greater ease of access to laboratories when student populations are numerous, relieve in conducting controlled experiments without fear of experiencing equipment failures. For the execution of this work, bibliographic search on immersive methodologies applied to learning has been done. Works that contribute to virtual education, enhanced by the application of augmented reality, were selected. The second step has been the construction of a proposal of the teaching methodology for virtualized learning.