A Predictive Analysis Model of Customer Purchase Behavior using Modified Random Forest Algorithm in Cloud Environment

This study comprehensively considers soil formation factors such as land use types, soil types, depths, and geographical conditions in Lanxi City, China. Using multi-source public data, three environmental variable screening methods, the Boruta algorithm, Recursive Feature Elimination (RFE), and Particle Swarm Optimization (PSO), were used to optimize and combine 47 environmental variables for the modeling of soil pH based on the data collected from farmland in the study area in 2022, and their effects were evaluated. A Random Forest (RF) model was used to predict soil pH in the study area. At the same time, Pearson correlation analysis, an environmental variable importance assessment based on the RF model, and SHAP explanatory model were used to explore the main controlling factors of soil pH and reveal its spatial differentiation mechanism. The results showed that in the presence of a large number of environmental variables, the model with covariates selected by PSO before the application of the Random Forest algorithm had higher prediction accuracy than that of Boruta–RF, RFE–RF, and all variable prediction RF models (MAE = 0.496, RMSE = 0.641, R2 = 0.413, LCCC = 0.508). This indicates that PSO, as a covariate selection method, effectively optimized the input variables for the RF model, enhancing its performance. In addition, the results of the Pearson correlation analysis, RF-model-based environmental variable importance assessment, and SHAP explanatory model consistently indicate that Channel Network Base Level (CNBL), Elevation (DEM), Temperature mean (T_m), Evaporation (E_m), Land surface temperature mean (LST_m), and Humidity mean (H_m) are key factors affecting the spatial differentiation of soil pH. In summary, the approach of using PSO for covariate selection before applying the RF model exhibits high prediction accuracy and can serve as an effective method for predicting the spatial distribution of soil pH, providing important references for accurately simulating the spatial mapping of soil attributes in hilly and basin areas.

To accurately estimate the age of individual tree and to achieve full-cycle sustainable management of natural Larix gmelinii forest in Great Xing'an Mountains of northeastern China, we constructed individual tree age prediction model using stepwise regression and random forest algorithms based on 44 fixed plots data and 280 stan-dard tree cores obtained from the Pangu Forest Farm. We analyzed the influence of stand structure, site conditions, and competition index on the accuracy of model prediction. The model was evaluated by the coefficient of determination (R2), root mean square error (RMSE), and mean absolute error (MAE). The results showed that the random forest model had the highest prediction accuracy when number of decision trees was 1500 and number of node con-tention variables was 8. The random forest model had better accuracy and prediction ability than the stepwise regression model, with R2, RMSE and MAE of 0.5882, 9.9259 a, 8.1155 a. Diameter at breast height was the most important factor affecting age prediction (83.8%), followed by tree height (34.4%), elevation (17.9%), and basal area per hectare (17.5%). The random forest algorithm exhibited better adaptability and modeling effect on constructing a predictive model for individual tree age. This research contributed to improving the accuracy of growth and harvest estimation for L. gmelinii, and could provide a reference for other scientific studies related to tree age estimation in forests.

Diagnostic and prognostic value of diquat plasma concentration and complete blood count in patients with acute diquat poisoning based on random forest algorithms.

To predict the potential geographic distribution of Oncomelania hupensis in Yunnan Province using random forest (RF) and maximum entropy (MaxEnt) models, so as to provide insights into O. hupensis surveillance and control in Yunnan Province. The O. hupensis snail survey data in Yunnan Province from 2015 to 2016 were collected and converted into O. hupensis snail distribution site data. Data of 22 environmental variables in Yunnan Province were collected, including twelve climate variables (annual potential evapotranspiration, annual mean ground surface temperature, annual precipitation, annual mean air pressure, annual mean relative humidity, annual sunshine duration, annual mean air temperature, annual mean wind speed, ≥ 0 ℃ annual accumulated temperature, ≥ 10 ℃ annual accumulated temperature, aridity and index of moisture), eight geographical variables (normalized difference vegetation index, landform type, land use type, altitude, soil type, soil textureclay content, soil texture-sand content and soil texture-silt content) and two population and economic variables (gross domestic product and population). Variables were screened with Pearson correlation test and variance inflation factor (VIF) test. The RF and MaxEnt models and the ensemble model were created using the biomod2 package of the software R 4.2.1, and the potential distribution of O. hupensis snails after 2016 was predicted in Yunnan Province. The predictive effects of models were evaluated through cross-validation and independent tests, and the area under the receiver operating characteristic curve (AUC), true skill statistics (TSS) and Kappa statistics were used for model evaluation. In addition, the importance of environmental variables was analyzed, the contribution of environmental variables output by the models with AUC values of > 0.950 and TSS values of > 0.850 were selected for normalization processing, and the importance percentage of environmental variables was obtained to analyze the importance of environmental variables. Data of 148 O. hupensis snail distribution sites and 15 environmental variables were included in training sets of RF and MaxEnt models, and both RF and MaxEnt models had high predictive performance, with both mean AUC values of > 0.900 and all mean TSS values and Kappa values of > 0.800, and significant differences in the AUC (t = 19.862, P < 0.05), TSS (t = 10.140, P < 0.05) and Kappa values (t = 10.237, P < 0.05) between two models. The AUC, TSS and Kappa values of the ensemble model were 0.996, 0.954 and 0.920, respectively. Independent data verification showed that the AUC, TSS and Kappa values of the RF model and the ensemble model were all 1, which still showed high performance in unknown data modeling, and the MaxEnt model showed poor performance, with TSS and Kappa values of 0 for 24%(24/100) of the modeling results. The modeling results of 79 RF models, 38 MaxEnt models and their ensemble models with AUC values of > 0.950 and TSS values of > 0.850 were included in the evaluation of importance of environmental variables. The importance of annual sunshine duration (SSD) was 32.989%, 37.847% and 46.315% in the RF model, the MaxEnt model and their ensemble model, while the importance of annual mean relative humidity (RHU) was 30.947%, 15.921% and 28.121%, respectively. Important environment variables were concentrated in modeling results of the RF model, dispersed in modeling results of the MaxEnt model, and most concentrated in modeling results of the ensemble model. The potential distribution of O. hupensis snails after 2016 was predicted to be relatively concentrated in Yunnan Province by the RF model and relatively large by the MaxEnt model, and the distribution of O. hupensis snails predicted by the ensemble model was mostly the joint distribution of O. hupensis snails predicted by RF and MaxEnt models. Both RF and MaxEnt models are effective to predict the potential distribution of O. hupensis snails in Yunnan Province, which facilitates targeted O. hupensis snail control.

The random forest(RF) algorithm is a very efficient and excellent ensemble classification algorithm. In this paper, we improve the random forest algorithm and propose an algorithm called ‘Bayesian Weighted Random Forest’(B-RF), focus on the problem that inaccurate decision tree classification caused by the same voting weights in the traditional random forest model. The main idea underlying the proposed model is to replace the supermajority voting of random forests into weighted voting, fully consider the difference of classification ability of each decision tree, using the Bayesian formula to dynamically update the weight value for each tree, so that the strong classifier has higher voting power and effectively improves the overall performance of classification. Through the verification of UCI database, the results show that the classification accuracy of the proposed weighted random forest model is higher. This illustrate the outperformance of the proposed model in comparison with the general random forest algorithm.

The Random Forests (RF) algorithm is a machine learning method that has recently been demonstrated as a viable technique for data-driven predictive modeling of mineral prospectivity, and thus, it is instructive to further examine its usefulness in this particular field. A case study was carried out using data from Catanduanes Island (Philippines) to investigate further (a) if RF modeling can be used for data-driven modeling of mineral prospectivity in areas with few (i.e., <20) mineral occurrences and (b) if RF modeling can handle predictor variables with missing values. We found that RF modeling outperforms evidential belief (EB) modeling of prospectivity for hydrothermal Au–Cu deposits in Catanduanes Island, where 17 hydrothermal Au–Cu prospects are known to exist. Moreover, just like EB modeling, RF modeling allows analysis of the spatial relationships between known prospects and individual layers of predictor data. Furthermore, RF modeling can handle missing values in predictor data through an RF-based imputation technique whereas in EB modeling, missing values are simply represented by maximum uncertainty. Therefore, the RF algorithm is a potentially useful method for data-driven predictive modeling of mineral prospectivity in regions with few (i.e., <20) occurrences of mineral deposits of the type sought. However, further testing of the method in other regions with few mineral occurrences is warranted to fully determine its usefulness in data-driven predictive modeling of mineral prospectivity.

Random forest predictive modeling of mineral prospectivity with small number of prospects and data with missing values in Abra (Philippines)

Chlorophyll a concentration is an important indicator to characterize phytoplankton biomass, which further reflects the water quality of lakes. Based on the data of chlorophyll a concentration and environmental factors extracted from the ChlaData, HydroLAKES, and HELLAKES databases for Chinese lakes for three years (2000, 2005, and 2010), we used the random forest model and the generalized linear model to analyze the relationship between chlorophyll a concentration and environmental factors in Chinese lakes and predict the chlorophyll a concentration. The results showed that the relative importance of environmental factors for chlorophyll a was as follows: nutrient salt concentration &gt; longitude and latitude &gt; monthly mean precipitation &gt; altitude &gt; annual average temperature. The coefficient of determination of the random forest model was 0.9997 (R2 = 0.9997), and the root-mean-square error was 0.0010 (RMSE = 0.0010), with high prediction accuracy. The random forest model and the generalized linear model both showed that TP was the main influencing factor of chlorophyll a concentration. The validation results based on the measured data show that the models are reliable. By making more accurate predictions of chlorophyll a concentrations, we can facilitate the prevention, control, and treatment of lake blooms.

The reliability of hard drives is paramount for maintaining data integrity and availability in cloud services and enterprise-level data centers where unexpected failures significantly impact operational efficiency and general performance. This work aims to develop a predictive model using regression analysis to accurately forecast imminent hard drive failures based on historical operational data, specifically SMART (Self-Monitoring Analysis and Reporting Technology) attributes. The study evaluated various regression models which comprises Decision Tree, Random Forest, Support Vector Machine (SVM), Gradient Boosting, and Neural Network. The outcomes indicated that the Random Forest model, with an MSE of 24.7427 and an R2 of 0.9876 and the Neural Network model, with an MSE of 22.6011 and an R2of 0.7442, as the best performing models as they demonstrated high predictive accuracy and robustness. In contrast, the SVM model showed poor performance with an MSE of 2888.8623 and a negative R2of -0.4465. Based on these outcomes, the Random Forest and Neural Network models are recommended for predicting hard drive failures as they delivered a balance of accuracy and interpretability.

In this paper, a semi-supervised random forest (RF) algorithm is presented for fault diagnosis of rotating machinery. Firstly, many unlabeled samples are divided into two parts, denoted respectively as unlabeled sample I and unlabeled sample II. Then a graph-all the labeled samples are used to train the multiple decision trees. If the classification result is consistent with the one of label prediction, then the unlabeled sample I is added to the labeled samples and used for building RF model. While, the data of unlabeled sample II are utilized for testing of the obtained RF model. Finally, the developed RF algorithm is applied to an experimental platform of rotating machinery. It is shown from the simulation results that, for the cases of noisy samples with unsatisfying labels, the new developed semi-supervised RF algorithm can improve the fault classification accuracy than the conventional RF.

The mechanism of dam safety monitoring model is analyzed; for the dam system comprehensive affected by multi-factor, the mapping relationship between the influence factors and the dam behavior effects domain is usually nonlinear. Synthesizing each kind of factor, 27 parameters are chosen as the main factors which affect the accuracy of the monitoring model. Taking the actual monitoring data as the evaluation factor, the dam safety monitoring model based on the random forest (RF) intelligent algorithm was built with the actual monitoring data to predict uplift pressure. At the same time, test the significance of each variable based on the RF monitoring model and calculate the importance degree of each variable for the model through the importance function. It is indicated that RF model can be relatively fast and accurately predict the uplift pressure of the dam according to the influence factors. The average prediction accuracy is more than 95%. As compared with other intelligent algorithms such as support vector machine, RF has better robustness, higher prediction accuracy, and faster convergence speed. Because of the uniformity of the calculation procedure and the universality of the prediction method, the RF model also has reasonable extrapolation for other dam safety monitoring models (such as crack opening and seepage discharge). Significance test results obtained by the two methods have shown that the impact of reservoir water level and daily rainfall on the uplift pressure is significant, and other factors’ impact on dam deformation is unstable and changes with the external environmental influence.

Gully erosion susceptibility mapping using four machine learning methods in Luzinzi watershed, eastern Democratic Republic of Congo

GIS-based mineral prospectivity mapping using machine learning methods: A case study from Tongling ore district, eastern China

Tea is a cash crop that improves the quality of life for people in the Tanuyen District of Laichau Province, Vietnam. Tea yield, however, has stagnated in recent years, due to changes in temperature, precipitation, the age of the tea bushes, and diseases. Developing an approach for monitoring tea bushes by remote sensing and Geographic Information Systems (GIS) might be a way to alleviate this problem. Using multi-temporal remote sensing data, the paper details an investigation of the changes in tea health and yield forecasting through the normalized difference vegetation index (NDVI). In this study, we used NDVI as a support tool to demonstrate the temporal and spatial changes in NDVI through the extract tea NDVI value and calculate the mean NDVI value. The results of the study showed that the minimum NDVI value was 0.42 during January 2013 and February 2015 and 2016. The maximum NDVI value was in August 2015 and June 2017. We indicate that the linear relationship between NDVI value and mean temperature was strong with R 2 = 0.79 Our results confirm that the combination of meteorological data and NDVI data can achieve a high performance of yield prediction. Three models to predict tea yield were conducted: support vector machine (SVM), random forest (RF), and the traditional linear regression model (TLRM). For period 2009 to 2018, the prediction tea yield by the RF model was the best with a R 2 = 0.73 , by SVM it was 0.66, and 0.57 with the TLRM. Three evaluation indicators were used to consider accuracy: the coefficient of determination ( R 2 ), root-mean-square error (RMSE), and percentage error of tea yield (PETY). The highest accuracy for the three models was in 2015 with a R 2 ≥ 0.87, RMSE &lt; 50 kg/ha, and PETY less 3% error. In the other years, the prediction accuracy was higher in the SVM and RF models. Meanwhile, the RF algorithm was better than PETY (≤10%) and the root mean square error for this algorithm was significantly less (≤80 kg/ha). RMSE and PETY showed relatively good values in the TLRM model with a RMSE from 80 to 100 kg/ha and a PETY from 8 to 15%.

BackgroundA considerable portion of patients with fever of unknown origin (FUO) present concomitant lymphadenopathy. Diseases within the spectrum of FUO accompanied by lymphadenopathy include lymphoma, infections, and rheumatic diseases. Particularly, lymphoma has emerged as the most prevalent etiology of FUO with associated lymphadenopathy. Distinguishing between benign and malignant lymph node lesions is a major challenge for physicians and an urgent clinical concern for patients. However, conventional imaging techniques, including PET/CT, often have difficulty accurately distinguishing between malignant and benign lymph node lesions. This study utilizes PET/CT radiomics to differentiate between lymphoma and benign lymph node lesions in patients with FUO, aiming to improve diagnostic accuracy.ResultsData were collected from 204 patients who underwent 18F-FDG PET/CT examinations for FUO, including 114 lymphoma patients and 90 patients with benign lymph node lesions. Patients were randomly divided into training and testing groups at a ratio of 7:3. A total of 15 effective features were obtained by the least absolute shrinkage and selection operator (LASSO) algorithm. Machine learning models were constructed using logistic regression (LR), support vector machine (SVM), random forest (RF), and k-nearest neighbors (KNN) algorithms. In the training group, the area under the curve (AUC) values for predicting lymphoma and benign cases by LR, SVM, RF, and KNN models were 0.936, 0.930, 0.998, and 0.938, respectively. There were statistically significant differences in AUC between the RF and other models (all P < 0.001). In the testing group, the AUC values for the four models were 0.860, 0.866, 0.915, and 0.891, respectively, with no statistically significant differences observed among them (all P > 0.05). The decision curve analysis (DCA) curves of the RF model outperformed those of the other three models in both the training and testing groups.ConclusionsPET/CT radiomics demonstrated promising performance in discriminating lymphoma from benign lymph node lesions in patients with FUO, with the RF model showing the best performance.