A Rank Aggregation Algorithm for Ensemble of Multiple Feature Selection Techniques in Credit Risk Evaluation

Today, video data, as a powerful multimedia component, is accompanied by some problems with increasing usage in communication, health, education, and social media in particular. Classification and detection of concepts in video data by automatic methods are some of these challenging problems. In this study, we propose a video classification system, which incorporates deep convolutional neural networks (CNNs) by leveraging feature selection and data fusion techniques to improve the accuracy of the classification. Principal Component Analysis (PCA) as a feature selection method and Discriminant Correlation Analysis (DCA) technique, which incorporates class associations into the correlation analysis of feature sets for data fusion, are applied to the problem at the feature level. Support Vector Machines (SVMs) have been trained with new feature vectors obtained from different deep convolutional neural networks by feature selection and data fusion methods. The proposed method is tested for 38 concepts on TRECVID 2013 SIN video task dataset and the results are evaluated. Our results show that the classification accuracy is improved by 4% with an accuracy of 50.27% when the proposed data fusion and feature selection techniques are used.

Introduction: The early and accurate detection of COVID-19 remains a life-threatening challenge in medical analysis. Machine learning is used for predicting disease outcomes based on clinical parameters. This analysis proposes a comparative analysis of feature selection method and classification techniques to enhance COVID-19 detection accuracy using blood biomarkers. We used a pensourse dataset of 1,724 cases, including 35 features. To improve the model performance data preprocessing process included outlier handling, normalization, and transformation techniques to improve model performance. To identify the relevant features, we employed the three-feature selection methods Chi-Square test, Pearson correlation coefficient, and Random Forest. The model prediction accuracy was enhanced using a stacking ensemble classication techniques. The machine learning based classification models effectively predicted COVID-19 infectious disease using blood biomarkers with optimized feature selection techniques. Objectives: To enhance the accuracy of COVID-19 prediction using machine learning techniques by applying feature selection and classification techniques on blood biomarkers. Methods: The comparative analysis utilized a publicly available dataset containing 1,724 cases with 35 attributes. Data preprocessing involved outlier handling, normalization, and transformation techniques. Employed Chi-Square test, Pearson correlation coefficient, and Random Forest feature selection techniques. Stacking ensemble classification algorithm was utilized for the better performance of a model. Results: The classification models demonstrated efficiency in predicting COVID-19 using blood biomarkers. Optimized feature selection significantly improved predictive accuracy, highlighting the importance of selecting relevant features for model performance enhancement. Conclusions: This study showcases the potential of ML-driven approaches for COVID-19 detection, emphasizing the role of feature selection in improving classification accuracy. The findings contribute to the advancement of diagnostic tools, offering a data-driven solution for rapid and reliable COVID-19 screening.

High-dimensional datasets can lead to overfitting and computationally expensive model building on machine learning. This study uses a dimensionality reduction technique, namely feature selection techniques, to overcome these problems. Five feature selection methods were used, i.e., Chi-Square (CS), Information Gain (IG), Genetic Algorithm (GA), Particle Swarm Optimization (PSO), and Least Absolute Shrinkage and Selection Operator (LASSO), and three classifier methods viz. Naïve Bayes, Extreme Gradient Boosting (XGB), and RF Classifier. The dataset used is the Heart Attack Analysis & Prediction Dataset. In this study, three scenarios of the best feature selection were carried out, namely: 1. selection of the best feature using a specific feature selection, 2. the intersection of selection of the best feature from the same category, 3. the intersection of selection of the best feature from the five proposed feature selection methods. The performance model is measured using accuracy, precision, recall, f1-score, AUC, and training time. This study reveals that feature selection is very effective in improving the performance of prediction models. Based on the experiment results, the best feature selection is CS and IG in the Filter Category with the XGB model. The best feature selected improved the performance of accuracy, precision, recall, f1-score, and AUC, i.e., 1.7%, 1%, 2.3%, 1.6%, and 0.2%, respectively. Meanwhile, training time requirements decreased by 23.5%. Feature selection with specific techniques performs better than feature selection by selecting the best features from the same category feature selection technique or various other feature selection methods.

Credit risk assessment is an essential task for financial institutions, as it evaluates the likelihood of loan defaults. Misclassifying loan applications can result in substantial economic losses. However, accurately predicting customers' creditworthiness presents challenges for machine learning models due to high dimensionality and imbalanced class distributions, which can severely impact overall model performance. This implements three feature selection (FS) techniques, such as Random Forest with Highly Correlated features (RFHC), Information Gain, and Chi-Square to address the high dimensional problem. Additionally, SMOTE is implemented to address the imbalanced dataset. The model performance is analyzed using three different approaches. First, employing only feature selection techniques, in the second approach, we employed feature selection followed by oversampling, and in the final approach, oversampling prior to feature selection is employed. The experimental results indicate that implementing feature selection followed by oversampling gives better performance compared to the other two approaches. Among the feature selection techniques, RFHC outperforms the others, achieving a highest F1-score of <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\text{95.12 \%}$</tex> and an AUC value of <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$\text{85.76 \%}$</tex>.

Generally, there are two types of approaches available for the detection of networks attacks, namely signature based and anomaly based. In this work, we will analyze the performance of anomaly-based detection model in SDN with the help of some common machine learning algorithms and feature selection mechanisms. We construct a mechanism of machine learning model for an intrusion detection system and train the model with the NSL-KDD Data set using feature selection technique. In order to enhance the performance of the classifier, some feature selection methods have been applied as a prepossessing of the data set. We have used five feature selection methods, namely Info Gain, Gain Ratio, CFS Subset Evaluator, Symmetric Uncertainty, and Chi-square test. A full data set of 41 features and a reduced data set after applying feature selection method has been experimented. A data set with feature selection ensures the highest accuracy with Random Forest classifier using Gain Ratio feature selection Evaluator.

Drug-Protein Interaction (DPI) identification is crucial in drug discovery. The high dimensionality of drug and protein features poses challenges for accurate interaction prediction, necessitating the use of computational techniques. Docking-based methods rely on 3D structures, while ligand-based methods have limitations such as reliance on known ligands and neglecting protein structure. Therefore, the preferred approach is the chemogenomics-based approach using machine learning, which considers both drug and protein characteristics for DPI prediction. In machine learning, feature selection plays a vital role in improving model performance, reducing overfitting, enhancing interpretability, and making the learning process more efficient. It helps extract meaningful patterns from drug and protein data while eliminating irrelevant or redundant information, resulting in more effective machine-learning models. On the other hand, classification is of great importance as it enables pattern recognition, decision-making, predictive modeling, anomaly detection, data exploration, and automation. It empowers machines to make accurate predictions and facilitates efficient decision-making in DPI prediction. For this research work, protein data was sourced from the KEGG database, while drug data was obtained from the DrugBank data machine-learning base. To address the issue of imbalanced Drug Protein Pairs (DPP), different balancing techniques like Random Over Sampling (ROS), Synthetic Minority Over-sampling Technique (SMOTE), and Adaptive SMOTE were employed. Given the large number of features associated with drugs and proteins, feature selection becomes necessary. Various feature selection methods were evaluated: Correlation, Information Gain (IG), Chi-Square (CS), and Relief. Multiple classification methods, including Support Vector Machines (SVM), Random Forest (RF), Adaboost, and Logistic Regression (LR), were used to predict DPI. Finally, this research identifies the best balancing, feature selection, and classification methods for accurate DPI prediction. This comprehensive approach aims to overcome the limitations of existing methods and provide more reliable and efficient predictions in drug-protein interaction studies.

Background: Feature selection techniques are important factors for improving machine learning models because they increase prediction accuracy and decrease the time to create a model. Recently, feature selection techniques have been employed on software quality prediction problems with different results and no clear indication of which techniques are frequently used.Objective: This study aims to conduct a systematic review of the application of feature selection techniques in software quality prediction and answers eight research questions.Method: The review evaluates 15 papers in 9 journals and 6 conference proceedings from 2007 to 2017 using the standard systematic literature review method.Results: The results obtained from this study reveal that the filter feature selection method was the most commonly used in the studies (60%) and RELIEF was the most employed among this method, and a limited number of studies employed an ensemble method. Several studies used public datasets available in the PROMISE software project repository (60%). Most studies focused on software defect prediction (classification problem) using area under curve (AUC) as a primary evaluation measure, whereas only two studies focused on software maintainability prediction (regression problem) using mean magnitude of relative error (MMRE) as a primary evaluation measure. All selected studies performed k-fold cross-validation to evaluate model accuracy. Individual prediction models were mostly employed and ensemble models appeared only in three studies. Naive Bayes was the most investigated among individual models, whereas Random forest was the most investigated among ensemble models.Conclusion: Feature selection techniques used by selected primary studies have a positive impact on the performance of the prediction models. Further, both ensemble feature selection method and ensemble models have the ability for increasing prediction accuracy over single methods or individual models and have reported improvement in the prediction accuracy; however, the application of these techniques in software quality prediction is still limited.

Last century, the challenge was to develop new technologies that store large amount of data. Recently, the challenges are to effectively utilize the incredible amount of data and to obtain knowledge that benefits business, scientific, and government transactions by using subset of features rather than the whole features in the dataset. In the present paper, we have focused on feature selection techniques as a method to gain high quality attributes to enhance the mining process. Feature selection techniques touch all disciplines that require knowledge discovery from large data. In our study, we made a comparison between benchmark feature selection methods based on three well-known datasets and three well-recognized machine learning algorithms. The study found that feature selection methods are capable to improve the performance of learning algorithms. However, no single feature selection methods that best satisfy all datasets and learning algorithms. Therefore, machine learning researchers should understand the nature of datasets and learning algorithms characteristics in order to obtain better outcome. Overall, correlation based feature selection (CFS) and consistency based subset evaluation (CB) performed better than information gain, symmetrical uncertainty, Relief (RF), and principle components analysis (PC).

Non-Intrusive Load Monitoring (NILM) aids in estimating the individual energy consumed by different appliances using aggregate signals measured at point of common connection. This paper explores various unexplored aspects concerning load classification in NILM. Rich feature sets are extracted from load signatures using auto-correlogram, Variational Mode Decomposition (VMD), and Wavelet Packet Tree (WPT) decomposition. Typically, previous works employ a single Feature Selection (FS) technique to earmark the relevant features for improved performance of NILM. However, each FS technique behaves uniquely, and the effects of using different FS techniques or their combinations have yet to be explored for NILM. Hence, Combinatorial Fusion Analysis (CFA), which surpasses the performance of a single FS technique by considering an optimal combination of multiple FS techniques, is used in this paper. The final selected features are fused and provided to a classifier. Rather than manually tuning or performing an exhaustive search for setting the classifier’s hyper-parameters, as prevalent in previous works, the present work utilizes Bayesian Optimization (BO) comprising surrogate and acquisition functions. The proposed work’s efficacy is validated on publicly available data-sets in a host computer and an embedded device, namely, R-Pi, via comparison with previous works.

In machine learning, feature selection is a commonly used technique for improving the predictive performance and interpretability of a trained model. Feature selection techniques are classified into three approaches: the filter, wrapper, and embedded approaches. The embedded approach performs the feature selection process during the model training and achieves a good balance between performance and computational cost in general. In the paper, we propose a novel embedded feature selection method using probabilistic model-based evolutionary optimization. We introduce the multivariate Bernoulli distribution, which determines the selection of features, and we optimize its parameters during the training. The distribution parameter update rule is the same as that of the population-based incremental learning (PBIL), but we simultaneously update the parameters of the machine learning model using an ordinary gradient descent method. This method can be easily implemented into non-linear models, such as neural networks. Moreover, we incorporate the penalty term into the objective function to control the number of selected feature. We apply the proposed method with the neural network model to the feature selection of three classification problems. The proposed method achieves competitive performance and reasonable computational cost compared with conventional feature selection methods.

Software defect prediction models are used for predicting high risk software components. Feature selection has significant impact on the prediction performance of the software defect prediction models since redundant and unimportant features make the prediction model more difficult to learn. Ensemble feature selection has recently emerged as a new methodology for enhancing feature selection performance. This paper proposes a new multi-criteria-decision-making (MCDM) based ensemble feature selection (EFS) method. This new method is termed as MCDM-EFS. The proposed method, MCDM-EFS, first generates the decision matrix signifying the feature’s importance score with respect to various existing feature selection methods. Next, the decision matrix is used as the input to well-known MCDM method TOPSIS for assigning a final rank to each feature. The proposed approach is validated by an experimental study for predicting software defects using two classifiers K-nearest neighbor (KNN) and naïve bayes (NB) over five open-source datasets. The predictive performance of the proposed approach is compared with existing feature selection algorithms. Two evaluation metrics – nMCC and G-measure are used to compare predictive performance. The experimental results show that the MCDM-EFS significantly improves the predictive performance of software defect prediction models against other feature selection methods in terms of nMCC as well as G-measure.

Software defect prediction (SDP) is used to identify defects in software modules that can be a challenge in software development. This research focuses on the problems that occur in Particle Swarm Optimization (PSO), such as the problem of noisy attributes, high-dimensional data, and premature convergence. So this research focuses on improving PSO performance by using feature selection methods with hybrid techniques to overcome these problems. The feature selection techniques used are Filter and Wrapper. The methods used are Chi-Square (CS), Correlation-Based Feature Selection (CFS), and Forward Selection (FS) because feature selection methods have been proven to overcome data dimensionality problems and eliminate noisy attributes. Feature selection is often used by some researchers to overcome these problems, because these methods have an important function in the process of reducing data dimensions and eliminating uncorrelated attributes that can cause noisy. Naive Bayes algorithm is used to support the process of determining the most optimal class. Performance evaluation will use AUC with an alpha value of 0.050. This hybrid feature selection technique brings significant improvement to PSO performance with a much lower AUC value of 0.00342. Comparison of the significance of AUC with other combinations shows the value of FS PSO of 0.02535, CFS FS PSO of 0.00180, and CS FS PSO of 0.01186. The method in this study contributes to improving PSO in the SDP domain by significantly increasing the AUC value. Therefore, this study highlights the potential of feature selection with hybrid techniques to improve PSO performance in SDP.

Feature selection (FS) plays a crucial role in medical imaging by reducing dimensionality, improving computational efficiency, and enhancing diagnostic accuracy. Traditional FS techniques, including filter, wrapper, and embedded methods, have been widely used but often struggle with high-dimensional and heterogeneous medical imaging data. Deep learning-based FS methods, particularly Convolutional Neural Networks (CNNs) and autoencoders, have demonstrated superior performance but lack interpretability. Hybrid approaches that combine classical and deep learning techniques have emerged as a promising solution, offering improved accuracy and explainability. Furthermore, integrating multi-modal imaging data (e.g., Magnetic Resonance Imaging (MRI), Computed Tomography (CT), Positron Emission Tomography (PET), and Ultrasound (US)) poses additional challenges in FS, necessitating advanced feature fusion strategies. Multi-modal feature fusion combines information from different imaging modalities to improve diagnostic accuracy. Recently, quantum computing has gained attention as a revolutionary approach for FS, providing the potential to handle high-dimensional medical data more efficiently. This systematic literature review comprehensively examines classical, Deep Learning (DL), hybrid, and quantum-based FS techniques in medical imaging. Key outcomes include a structured taxonomy of FS methods, a critical evaluation of their performance across modalities, and identification of core challenges such as computational burden, interpretability, and ethical considerations. Future research directions—such as explainable AI (XAI), federated learning, and quantum-enhanced FS—are also emphasized to bridge the current gaps. This review provides actionable insights for developing scalable, interpretable, and clinically applicable FS methods in the evolving landscape of medical imaging.

With the rapid development of artificial intelligence in recent years, the research on image processing, text mining, and genome informatics has gradually deepened, and the mining of large-scale databases has begun to receive more and more attention. The objects of data mining have also become more complex, and the data dimensions of mining objects have become higher and higher. Compared with the ultra-high data dimensions, the number of samples available for analysis is too small, resulting in the production of high-dimensional small sample data. High-dimensional small sample data will bring serious dimensional disasters to the mining process. Through feature selection, redundancy and noise features in high-dimensional small sample data can be effectively eliminated, avoiding dimensional disasters and improving the actual efficiency of mining algorithms. However, the existing feature selection methods emphasize the classification or clustering performance of the feature selection results and ignore the stability of the feature selection results, which will lead to unstable feature selection results, and it is difficult to obtain real and understandable features. Based on the traditional feature selection method, this paper proposes an ensemble feature selection method, Random Bits Forest Recursive Clustering Eliminate (RBF-RCE) feature selection method, combined with multiple sets of basic classifiers to carry out parallel learning and screen out the best feature classification results, optimizes the classification performance of traditional feature selection methods, and can also improve the stability of feature selection. Then, this paper analyzes the reasons for the instability of feature selection and introduces a feature selection stability measurement method, the Intersection Measurement (IM), to evaluate whether the feature selection process is stable. The effectiveness of the proposed method is verified by experiments on several groups of high-dimensional small sample data sets.

Identification of high-risk genes and classification of acute myocardial infarction patients utilizing deep learning in a restricted cohort.