A reliability analysis method for earthquake resistance of large complex building structure

The implicit and computationally time-consuming performance function limits the application of classical reliability analysis methods in complex structures. To facilitate the reliability calculation of civil engineering structures, a reliability analysis method based on genetic algorithm (GA) and Gaussian process regression (GPR) is proposed in this paper. In this method, GPR is adopted to build the surrogate model of performance function, and GA is used for infill-sampling to improve the model accuracy at the limit state surface. Replacing the actual function with this model in Monte Carlo simulation (MCS), the approximate failure probability can be obtained. Four examples are analysed to validate the efficiency and accuracy of the proposed method. The results show that it can deal with the problems of static reliability and seismic reliability, and can be well combined with structural analysis software, which is convenient for engineering designers to use.

In this paper, a new method is developed that can be applied efficiently in reliability analysis and design verification of structures under random vibration. This method is based on singular value decomposition of modal coordinates cross covariance matrix. Computational algorithm and relative flow chart for this method is developed and compatible reliability criterion with this algorithm has been extracted. In order to results verification, we use Miles relation and Monte Carlo simulation -that are two well known methods in reliability analysis- and all of these methods are applied to a simple finite element model. Results show that new algorithm is more efficient for reliability analysis of structures under random vibration.

Surrogate modeling immersed probability density evolution method for structural reliability analysis in high dimensions

Reliability analysis techniques combining with various surrogate models have attracted increasing attention because of their accuracy and great efficiency. However, they primarily focus on the structures with continuous response, while very rare researches on the reliability analysis for structures with discontinuous response are carried out. Furthermore, existing adaptive reliability analysis methods based on importance sampling (IS) still have some intractable defects when dealing with small failure probability, and there is no related research on reliability analysis for structures involving discontinuous response and small failure probability. Therefore, this paper proposes a novel reliability analysis method called AGPC-IS for such structures, which combines adaptive Gaussian process classification (GPC) and adaptive-kernel-density-estimation-based IS. In AGPC-IS, an efficient adaptive strategy for design of experiments (DoE), taking into consideration the classification uncertainty, the sampling uniformity and the regional classification accuracy improvement, is developed with the purpose of improving the accuracy of Gaussian process classifier. The adaptive kernel density estimation is introduced for constructing the quasi-optimal density function of IS. In addition, a novel and more precise stopping criterion is also developed from the perspective of the stability of failure probability estimation.The efficiency, superiority and practicability of AGPC-IS are verified by three examples

PurposeThe purpose of this paper is to briefly summarize and review the theories and methods of complex structures’ dynamic reliability. Complex structures are usually assembled from multiple components and subjected to time-varying loads of aerodynamic, structural, thermal and other physical fields; its reliability analysis is of great significance to ensure the safe operation of large-scale equipment such as aviation and machinery.Design/methodology/approachIn this paper for the single-objective dynamic reliability analysis of complex structures, the calculation can be categorized into Monte Carlo (MC), outcrossing rate, envelope functions and extreme value methods. The series-parallel and expansion methods, multi-extremum surrogate models and decomposed-coordinated surrogate models are summarized for the multiobjective dynamic reliability analysis of complex structures.FindingsThe numerical complex compound function and turbine blisk are used as examples to illustrate the performance of single-objective and multiobjective dynamic reliability analysis methods. Then the future development direction of dynamic reliability analysis of complex structures is prospected.Originality/valueThe paper provides a useful reference for further theoretical research and engineering application.

Fuzzy reliability analysis can be implemented using two discrete optimization maps in the processes of reliability and fuzzy analysis. Actually, the efficiency and robustness of the iterative reliability methods are two main factors in the fuzzy-based reliability analysis due to the huge computational burdens and unstable results. In the structural fuzzy reliability analysis, the first-order reliability method (FORM) using discrete nonlinear map can provide a C membership function. In this paper, a discrete nonlinear conjugate map is proposed using a relaxed-finite step size method for fuzzy structural reliability analysis, namely Fuzzy conjugate relaxed-finite step size method fuzzy CRS. A discrete conjugate map is stabilized using two adaptive factors to compute the relaxed factor and step size in FORM. The framework of the proposed fuzzy structural reliability method is established using two linked iterative discrete maps as an outer loop, which constructs the membership function of the response using alpha level set optimization based on genetic operator, and the inner loop, implemented for reliability analysis using proposed conjugate relaxed-finite step size method. The fuzzy CRS and fuzzy HL-RF methods are compared to evaluate the membership functions of five structural problems with highly nonlinear limit state functions. Results demonstrated that the fuzzy CRS method is computationally more efficient and is strongly more robust than the HL-RF for fuzzy-based reliability analysis of the nonlinear structural reliability problems.

Reliability is a critical indicator for evaluating the safety and performance of mechanical structures. Surrogate models are widely employed in reliability analysis to reduce computational costs; however, their accuracy strongly depends on the quality of training samples. This paper proposes an uncertainty and distance-driven sequential sampling deep neural network method (UDDS-DNN) for structural reliability analysis. First, initial training samples were generated from the Monte Carlo population (MCP) using the Minimax sampling strategy. This ensured global coverage of the random variable space. Then, the predictive uncertainty of the DNN was quantified using the Jackknife-based method. The estimated uncertainty, inter-sample distance, and probabilistic characteristics of the input random variables were considered. The adaptive learning function was constructed to guide sequential sample enrichment. The proposed method was validated through two numerical examples and three engineering case studies. Results demonstrated that UDDS-DNN achieves high accuracy and computational efficiency in multivariate, nonlinear, and complex structural reliability problems. The method provided an effective solution for reliability analysis of complex structures using DNN-based sequential sampling.

A stress-strength interference model in its interval form, with uncertain quantities of structures described by interval numbers, is used for reliability analysis. Such structural reliability analysis problem is called structural interval reliability analysis. A discrete possibility degree method for structural interval reliability is proposed. By comparing equally-spaced-points of structural interval stress value and structural interval strength value, a partition for comparison relations (big, equal or small) between interval stress and interval strength is built. Based on this partition, new concepts for interval reliability analysis are defined, such as structural safety possibility degree and structural failure possibility degree, etc. By one simple example, the feasibility and effectiveness of discrete possibility degree method for structural interval reliability are demonstrated.

Bounds-based structure reliability analysis of bogie frame under variable load cases

To improve the efficiency and accuracy of traditional least squares method–based polynomial response surface method (RSM) for reliability analysis of structure, the application of various adaptive metamodeling approaches is notable. The moving least squares method (MLSM)–based RSM is the simplest one and found to be effective in this regard. But, its performance in reliability analysis of structure largely depends on the proper choice of the parameter of weight function involved. In the present study, a generalized scheme to appropriately obtain the hyper-parameter of the MLSM-based RSM to approximate implicit responses of structure for reliability analysis is proposed. The algorithm is hinged on the fact that for reliability analysis, one is interested in the sign of the approximated limit state function (LSF) rather than its magnitude. Thereby, it is sufficient to obtain the hyper-parameter for which the first derivative of the probability of failure as obtained from the approximated LSF with respect to the hyper-parameter is zero. The effectiveness of the proposed algorithm is elucidated through three numerical examples. The improvement achieved by the proposed MLSM-based RSM has been compared with the reliability results obtained by the MLSM-based RSM considering the commonly recommended value of the hyper-parameter and also by the approach where the parameters are obtained by leave one out cross-validation procedure.

Time-dependent structural systems (TDSSs) in engineering involve high dimensionality, nonlinearity, and complex uncertainties, complicating the reliability analysis compared to time-independent assessments. To address these challenges, this paper proposes an extremum-based back propagation neural network (BPNN) method for TDSS reliability analysis. The method adopts a double-loop structure. Specifically, the inner loop finds the minimum of the time-dependent performance function for a given realization of the random variables. This transformation converts the time-dependent problem into an equivalent time-invariant one. Then, the outer loop constructs a BPNN surrogate model to map the relationship between the random variables and the performance function minima. To improve computational efficiency, an adaptive sample selection strategy is integrated into the training process. This technique selects samples near the failure boundary to iteratively update the BPNN, ensuring high accuracy with a small training set. Once the stopping criterion is satisfied, the failure probability is estimated using Monte Carlo simulation (MCS). The trained BPNN model is used to rapidly predict the extremum for the large-scale sample pool. The proposed method is verified through three practical engineering cases: a four-bar mechanism, an aero-engine turbine disc, and a cantilever tube. Results show that the method remains accurate and efficient. The successful applications confirm the rationality and engineering applicability of the proposed model.

In order to evaluate the failure probability of a complicated structure, the structural responses usually need to be estimated by some numerical analysis methods such as finite element method (FEM). The response surface method (RSM) can be used to reduce the computational effort required for reliability analysis when the performance functions are implicit. However, the conventional RSM is time-consuming or cumbersome if the number of random variables is large. This paper proposes a Legendre orthogonal neural network (LONN)-based RSM to estimate the structural reliability. In this method, the relationship between the random variables and structural responses is established by a LONN model. Then the LONN model is connected to a reliability analysis method, i.e. first-order reliability methods (FORM) to calculate the failure probability of the structure. Numerical examples show that the proposed approach is applicable to structural reliability analysis, as well as the structure with implicit performance functions.

In the reliability analysis of safety critical complex engineering structures, a very large number of the system parameters can be considered as random variables. The difficulty in computing the failure probability using the classical first- and second-order reliability methods (FORM and SORM) increases rapidly with the number of variables or ‘dimension’. There are mainly two reasons behind this. The first is the increase in computational time with the increase in the number of random variables. In principle, this problem can be handled with superior computational tools. The second reason, which is perhaps more fundamental, is that there are some conceptual difficulties typically associated with high dimensions. This means that even when one manages to carry out the necessary computations, the application of existing FORM and SORM may still lead to incorrect results in high dimensions. This paper is aimed at addressing this issue. Based on the asymptotic distribution of quadratic form in Gaussian random variables, two formulations for the case when the number of random variables n →∞ is provided. The first is called ‘strict asymptotic formulation’ and the second is called ‘weak asymptotic formulation’. Both approximations result in simple closed-form expressions for the probability of failure of an engineering structure. The proposed asymptotic approximations are compared with existing approximations and Monte Carlo simulations using numerical examples.

Although an accurate reliability assessment is essential to build a resilient infrastructure, it usually requires time-consuming computation. To reduce the computational burden, machine learning-based surrogate models have been used extensively to predict the probability of failure for structural designs. Nevertheless, the surrogate model still needs to compute and assess a certain number of training samples to achieve sufficient prediction accuracy. This paper proposes a new surrogate method for reliability analysis called Adaptive Hyperball Kriging Reliability Analysis (AHKRA). The AHKRA method revolves around using a hyperball-based sampling region. The radius of the hyperball represents the precision of reliability analysis. It is iteratively adjusted based on the number of samples required to evaluate the probability of failure with a target coefficient of variation. AHKRA adopts samples in a hyperball instead of an n-sigma rule-based sampling region to avoid the curse of dimensionality. The application of AHKRA in ten mathematical and two practical cases verifies its accuracy, efficiency, and robustness as it outperforms previous Kriging-based methods.

PurposeBecause of the high computational efficiency, response surface method (RSM) has been widely used in structural reliability analysis. However, for a highly nonlinear limit state function (LSF), the approximate accuracy of the failure probability mainly depends on the design point, and the result is that the response surface function composed of initial experimental points rarely fits the LSF exactly. The inaccurate design points usually cause some errors in the traditional RSM. The purpose of this paper is to present a hybrid method combining adaptive moving experimental points strategy and RSM, describing a new response surface using downhill simplex algorithm (DSA-RSM).Design/methodology/approachIn DSA-RSM, the operation mechanism principle of the basic DSA, in which local descending vectors are automatically generated, was studied. Then, the search strategy of the basic DSA was changed and the RSM approximate model was reconstructed by combining the direct search advantage of DSA with the reliability mechanism of response surface analysis.FindingsThe computational power of the proposed method is demonstrated by solving four structural reliability problems, including the actual engineering problem of a car collision. Compared to specific structural reliability analysis methods, the approach of modified DSA interpolation response surface for structural reliability has a good convergent capability and computational accuracy.Originality/valueThis paper proposes a new RSM technology based on proxy model to complete the reliability analysis. The originality of this paper is to present an improved RSM that adjusts the position of the experimental points judiciously by using the DSA principle to make the fitted response surface closer to the actual limit state surface.