A RFID Reader Configuration with an Enhanced Recognition Property for Indoor Positioning

Wi-Fi-based indoor positioning systems are becoming increasingly prevalent in digital transitions; therefore, ensuring accurate and robust positioning is essential to supporting the growth in demand for smartphones’ location-based services. The indoor positioning system on a smartphone, which is generally based on Wi-Fi received signal strength (RSS) measurements or the fingerprinting comparison technique, uses the K-NN algorithm to estimate the position due to its high accuracy. The fingerprinting algorithm is popular due to its ease of implementation and its ability to produce the desired accuracy. However, in a practical environment, the Wi-Fi signal strength-based positioning system is highly influenced by external factors such as changes in the environment, human interventions, obstacles in the signal path, signal inconsistency, signal loss due to the barriers, the non-line of sight (NLOS) during signal propagation, and the high level of fluctuations in the RSS, which affects location accuracy. In this paper, we propose a method that combines pedestrian dead reckoning (PDR) and Wi-Fi fingerprinting to select a k-node to participate in the K-NN algorithm for fingerprinting-based IPSs. The selected K-node is used for the K-NN algorithm to improve the robustness and overall accuracy. The proposed hybrid method can overcome practical environmental issues and reduces the KNN algorithm’s complexity by selecting the nearest neighbors’ search space for comparison using the PDR position estimate as the reference position. Our approach provides a sustainable solution for indoor positioning systems, reducing energy consumption and improving the overall environmental impact. The proposed method has potential applications in various domains, such as smart buildings, healthcare, and retail. The proposed method outperforms the traditional KNN algorithm in our experimental condition since its average position error is less than 1.2 m, and provides better accuracy.

Since the well-established navigation systems such as GPS are ineffective in indoor environments, research into developing novel indoor positioning technologies has emerged in recent years. While several technologies are being investigated, a practical and reliable indoor positioning system is yet to emerge. Indoor positioning using light signals holds a great potential to provide a reliable solution to the indoor positioning problem. This paper presents a comprehensive review of the available literature on light-based indoor positioning systems. The paper establishes a classification based on the design of various light-based indoor positioning (LIP) systems, and discusses their key components including hardware, software and algorithms. The limitations and challenges of the LIP systems are discussed in details, and current published solutions are presented. The review also provides a comparison between LIP systems and other optical positioning systems, and identifies the associated research gaps. Finally, based on the identified gaps, the future research directions in both LIP systems and other optical positioning systems are presented.

Location-based service is one of the most popular buzzwords in the field of U-city. Positioning a user is an essential ingredient of a location-based system on a U-city. For the outdoor positioning, GPS based practical solutions have been introduced. However, GPS measurement error is too big to be used for U-campus services because the size of a campus is relatively smaller than a city. We propose Relative-Interpolation Method in order to improve the correctness of outdoor positioning. Besides, indoor positioning is necessary for U-campus while GPS signal is not available inside buildings. For the indoor positioning, Cricket, Active Badge, and so on have been introduced. These methods require special equipments dedicated for positioning. Our method does not require such equipments because it determines the user’s position based on the receiver signal strength indicators (RSSI) from access points (AP) which are already installed for WLAN. The algorithm we are using for indoor positioning is a kind of finger prints method. However our algorithm builds a decision tree instead of a look-up table in the off-line phase. Therefore, our method is faster than existing indoor positioning methods in the real-time phase. We have integrated our indoor and outdoor positioning methods and implemented a prototype of our indoor-outdoor positioning method on a laptop. Our experimental results are discussed in this paper.

People generally find themselves lost while visiting a new indoor location because they are unaware of the building’s architecture, especially when it is a large one or a shopping mall. The Global Position System (GPS) does not work properly in the indoor environment because of the satellite signal attenuation. In this paper, to assist people in finding their path, a Li-Fi (Light-Fidelity) based Indoor Positioning System (IPS) is proposed. A framework is developed based on a Li-Fi LED lamp transmitter and a dongle receiver connected to an Android smartphone to decode the received sequence. The pathfinding graph-based algorithm is proceeded in a REST architecture by a Web service consulting the graph-path database both installed on a Raspberry pi 4. The proposed solution is a low cost and does not require any additional infrastructure. It is easy to implement in most indoor environments like hospitals, buildings, and campuses. A short survey of techniques and algorithms for indoor positioning and navigation with the help of smartphones is also presented.

The indoor positioning system (IPS) is becoming increasing important in accurately determining the locations of objects by the utilization of micro-electro-mechanical-systems (MEMS) involving smartphone sensors, embedded sources, mapping localizations, and wireless communication networks. Generally, a global positioning system (GPS) may not be effective in servicing the reality of a complex indoor environment, due to the limitations of the line-of-sight (LoS) path from the satellite. Different techniques have been used in indoor localization services (ILSs) in order to solve particular issues, such as multipath environments, the energy inefficiency of long-term battery usage, intensive labour and the resources of offline information collection and the estimation of accumulated positioning errors. Moreover, advanced algorithms, machine learning, and valuable algorithms have given rise to effective ways in determining indoor locations. This paper presents a comprehensive review on the positioning algorithms for indoors, based on advances reported in radio wave, infrared, visible light, sound, and magnetic field technologies. The traditional ranging parameters in addition to advanced parameters such as channel state information (CSI), reference signal received power (RSRP), and reference signal received quality (RSRQ) are also presented for distance estimation in localization systems. In summary, the recent advanced algorithms can offer precise positioning behaviour for an unknown environment in indoor locations.

Because of its high time-domain resolution, ultra-wideband (UWB) technology is capable of precise range measurement and has been applied in many accurate indoor positioning systems. This paper presents a practical indoor positioning and navigation system using the UWB modules we developed based on Decawave UWB chipset. In order to enhance the performance of the system in NLOS scenarios, a neural network approach is integrated. The feasibility of the combined approach is analysed and its accuracy is evaluated. The experiment results indicate that the neural network can maintain a stable accuracy no matter whether it is in an NLOS scenario and it is capable to identify the locations on two trajectories which are next to each other with very high confidence.

In recent times, social and commercial interests in location-based services (LBS) are significantly increasing due to the rise in smart devices and technologies. The global navigation satellite systems (GNSS) have long been employed for LBS to navigate and determine accurate and reliable location information in outdoor environments. However, the GNSS signals are too weak to penetrate buildings and unable to provide reliable indoor LBS. Hence, GNSS’s incompetence in the indoor environment invites extensive research and development of an indoor positioning system (IPS). Various technologies and techniques have been studied for IPS development. This paper provides an overview of the available smartphone-based indoor localization solutions that rely on radio frequency technologies. As fingerprinting localization is mostly accepted for IPS development owing to its good localization accuracy, we discuss fingerprinting localization in detail. In particular, our analysis is more focused on practical IPS that are realized using a smartphone and Wi-Fi/Bluetooth Low Energy (BLE) as a signal source. Furthermore, we elaborate on the challenges of practical IPS, the available solutions and comprehensive performance comparison, and present some future trends in IPS development.

Accurate and fast indoor Location-Based Services (LBS) is very important for daily life and emergency response. Indoor map is the basis of indoor LBS. The model construction and data organization of indoor map are the key scientific problems that urgently need to be solved in the current indoor LBS application. In recent years, hybrid models have been used widely in the research of indoor map, because they can balance the limitations of single models. However, the current studies about hybrid model pay more attention to the model accuracy and modeling algorithm, while ignoring its relationship between positioning and navigation and its practicality in mobile indoor LBS applications. This paper addresses a new indoor map model, named Building Information Modeling based Positioning and Navigation (BIMPN), which is based on the entity model and the network model. The highlight of BIMPN is that it proposes a concept of Step Node (SN) to assist indoor positioning and navigation function. We developed the Mobile Indoor Positioning and Navigation System (MIPNS) to verify the practicability of BIMPN. Results indicate that the BIMPN can effectively organize the characteristics of indoor spaces and the building features, and assist indoor positioning and navigation. The BIMPN proposed in this paper can be used for the construction of indoor maps and it is suitable for mobile indoor positioning and navigation systems.

The increasing demand of indoor Location Based Services (LBS) has made Indoor Positioning System (IPS) a hot research topic. Recently, various machine learning techniques have been developed to tackle the problems of IPS. The WLAN fingerprinting technique is one of the most cost effective choices for IPS due to the use of existing Wi-Fi networks in commercial and public buildings. However, the variation of Received Signal Strength (RSS) at any specific location due to the indoor fading issue leads to serious challenges in the accuracy of the distance estimates. In this paper, we propose a new technique by using Probabilistic Neural Network (PNN) multi-classifier based on Multiple Service Set Identifiers (MSSIDs) that are configured on the same access point. A spatial voting scenario for three PNN-classifiers is proposed as a tool to determine the location of the user. Using a spatial voting based technique is specifically designed to tackle the negative impact of the multi-path propagation on the performance of IPS. The proposed system is performed inside the College of Engineering and Applied Sciences (CEAS) at Western Michigan University. The performance of the proposed system compared with some of the common methods such as K-Nearest Neighbors (K-NN) and multi-class support vector machine (SVM). According to the experimental results, the spatial voting of the three PNN-dassifiers can significantly mitigate the adverse effects of RSS variation. The performance of the multi-classifier exhibits superior performance to that of the other single classifiers in all Area of Interest (AOI). Over 3000 m2 AOI, the proposed system achieves localization accuracy < 0.73m and with precision 90 % of the distance error less than 2m.

&amp;lt;p&amp;gt;The interest in indoor positioning systems has been rising in the last couple of decades. This interest was further accelerated by the availability of signals of opportunity. The introduction of signals of opportunity into the indoor environments has meant that these widely available technologies can be utilised to achieve higher levels of accuracy and precision for positioning in parking garages, airports, underground locations, large office buildings, and shopping centres. Indoor positioning can also be utilised for emergency services or for Building Information Models (BIM) for purposes such as construction sites or hospital building management. In addition to the need for indoor and outdoor positioning, there is a need to ensure seamless transitions in and out of these different environments. For example, building information from BIM could be utilised for navigation of BIM users that considers the architectural barriers (e.g., for wheelchairs, baby strollers, and transport of large equipment within the facility). For this, a positioning system capable of seamlessly transitioning in and out of buildings is needed. This paper proposes a multi-sensor and cooperative positioning method of seamless environment transition and presents the first architecture concept. For this purpose, Global Navigation Satellite System (GNSS) data are planned to be fused with Ultra Wide-Band (UWB), Inertial Measurement Unit (IMU), Wireless-Fidelity (Wi-Fi), visual camera and LiDAR (Light Detection and Ranging) data. All sensors required for such a positioning system, are already available on modern smartphones commonly used as low-cost platforms for pedestrian navigation and localisation. Newer smartphones are also equipped with LiDAR and UWB chips, which are a future signal of opportunity, just like Wi-Fi currently is. The transition to different environments will be determined based on the UWB anchors called identical anchors that will be used to transition from the global coordinate system for the outdoor environment to the local building environment for positioning in indoor environments. The proposed multi-sensor and cooperative positioning system is expected to be able to achieve decimetre-level accuracy.&amp;lt;/p&amp;gt;

Location-based services are among important applications in current telecommunication networks which causes an increasing demand in the advancements of indoor positioning systems (IPS). This paper presents a comprehensive review of the technologies and techniques employed in recent works related to IPS and discusses the challenges in IPS implementations. This study widely categorizes indoor positioning technologies into five types which are computer vision, short-range communication, acoustic-based, magnetic methods, and radio frequency (RF) technologies. The strengths and limitations of each technology is discussed based on its accuracy, coverage, infrastructure, implementation cost and signal characteristics. The literature study shows that range-based and fingerprinting are two main techniques employed in IPS. In addition, the study indicates that fingerprinting methods utilizing Wi-Fi and cellular networks are prevalent due to their widespread availability. However, these technologies face some challenges such as multipath fading, signal instability, device heterogeneity, infrastructure and cost implications, computational complexity, and privacy and security concerns. This paper emphasizes the need for innovative approaches to enhance positioning accuracy and reduce infrastructure costs, thereby fostering broader adoption of IPS across diverse applications.

Location Based Services (LBS) and Proximity Based Services (PBS) can play an important role in our daily life by simplifying tasks. Functions such as turning on and off lights can occur automatically or locking and unlocking doors can be done using LBS. By knowing the location of a user, appliances can be automated to function once the user is near them. Through the use of indoor localization, a user&#x0027;s position can be calculated. When designing an indoor localization system the density of transmitters plays an important role in maximizing the accuracy obtained. Increasing the number of references can improve the accuracy by providing additional information that the system can use in calculating a location. However, placing too many transmitters in the area can create interference in signals and negatively impact the localization results, while not having enough transmitters will hinder localization as not enough information is available. In this paper, we examine the optimal number of Bluetooth Low Energy (BLE) beacons to be used for indoor localization to optimize localization accuracy. Two algorithms were compared: trilateration and nonlinear least squares applying two types of filtering: moving average, and Kalman. Nine different types of systems were developed and compared in terms of accuracy and precision. According to experimental results placing six beacons in an environment will produce the optimal results. Using a nonlinear least squares algorithm with the three closest references with a moving average filter produced the lowest error of 1.149 meters with a standard deviation of 0.698 meters.

User location and tracking information are increasingly used for contact tracing and social community detection. In-door positioning and indoor navigation systems are reaching good performances in several realistic scenarios. After an evaluation exclusively done through simulations, nowadays, these systems are trying to reach robust performances and good accuracy in heterogeneous environments. Problems are manifold as each environment presents a structure that strongly affects inertial sensors and radio signal propagation. Generally, systems showing the best performances rely on an extended knowledge of the indoor map. Moreover, they implement a model for pedestrian dynamics in terms of e.g step length, stride and the behaviour of the target users. Experimental results obtained during realistic indoor competitions, clearly show that performances drop when such systems are used in unseen scenarios in which an external user test the proposed solution. In fact, many parameters that are generally calibrated and set to maximize the performances might not work as expected. In this paper, we highlight which best practices should be applied for model calibration in smartphone-based indoor positioning systems. We describe a reference system based on a particle filter, and we show the most relevant parameters and the main factors that are generally in common with all similar systems in the literature. We also present the Run-Once tool for reaching optimal parameters, highlighting those best practices that should be applied to indoor positioning systems to maximize their performances and improve their robustness.

Indoor navigation will become an important application on a smartphone for Location-Based Service (LBS).An indoor navigation system should work under normal circumstances and during emergencies, such as fires, during a building power shut down, alarm, etc.The LBS should be able to help users find the best exit route to the outside of the building under all circumstances and with high reliability.In this research, we develop an indoor ontology model for indoor navigation.This ontology model defines the indoor environment attributes such as location nodes, and connection points.The location nodes with the location information allow navigation in the indoor environment.Connection points are able to separate the map zones and the building floors into a "Map sheet."This ontology approach allows the LBS works in both normal circumstances and emergencies.This model provides a reliable indoor navigation system for LBS.

Modern smartphones and location-based services and apps are poised to transform our daily life. However, current smartphone-based localization solutions are limited mainly to outdoor, mostly missing practical, robust and accurate indoor location solutions. Despite significant efforts on indoor localization in both academia and industry in the past two decades, highly accurate and practical smartphone-based indoor localization remains an open problem. To enable indoor location-based services (ILBS), e.g., step-by-step navigation for the Blind and visually impaired, there are several stringent requirements: highly accurate (foot-level); no additional hardware components or extensions on users’ smartphones; scalable to massive concurrent users. Current GPS, Radio RSS (e.g. Wi-Fi, Bluetooth, ZigBee), or Fingerprinting based solutions can only achieve meter-level or room-level accuracy. In this paper, we propose a practical and accurate solution that fills the long-lasting gap of smartphone-based fine-grained indoor localization. Specifically, we design and implement an indoor localization ecosystem Guoguo. Guoguo consists of an anchor network with a coordination protocol to transmit modulated localization beacons using high-band acoustic signals, a realtime processing app in a smartphone, and a backend server for indoor contexts and location-based services. We further propose approaches to improve its coverage, accuracy, and location update rate with low-power consumption. Our prototype shows centimeter-level localization accuracy in several typical indoor environments. Such precise indoor localization is expected to have high impact in the future ILBS and our daily activities.