A robust multi-level sparse classifier with multi-modal feature extraction for face recognition

In the past few years, face recognition based on sparse representation is providing satisfactory classification accuracy. Face images involved in real life applications usually exhibit considerable pose, lighting, and expression variations, resulting in significant performance degradation of traditional sparse-based algorithms. In this paper, a novel face recognition method is developed as multi-level sparse (MLS) classifier with multi-modal feature extraction, which integrates benefits of sparse representation manifolds. In MLS classifier, sparse representation-based classification is performed at multiple levels to extract the hierarchical relationship information between training and testing images, which not only improves classification accuracy but also makes the system scalable. Also, the use of multi-modal feature in MLS classifier makes it discriminative to face changes while robust to intra-personal variations. To highlight the competency of proposed method, results are compared with sparse representation and other existing state-of-art methods in terms of mean classification error. An investigation on classification accuracy is performed to showcase the reliability of proposed method.

<p>This Paper proposes a new facial feature extraction approach, Wash-Hadamard Transform (WHT). This approach is based on correlation between local pixels of the face image. Its primary advantage is the simplicity of its computation. The paper compares the proposed approach, WHT, which was traditionally used in data compression with two other known approaches: the Principal Component Analysis (PCA) and the Discrete Cosine Transform (DCT) using the face database of Olivetti Research Laboratory (ORL). In spite of its simple computation, the proposed algorithm (WHT) gave very close results to those obtained by the PCA and DCT. This paper initiates the research into WHT and the family of frequency transforms and examines their suitability for feature extraction in face recognition applications.</p>

Over the last decade facial feature extraction has been actively researched for face recognition. This paper provides an up-to-date review of major human facia recognition research. Earlier sections we presented an overview of face recognition and its applications. In later sections, a literature review of the most recent face recognition technique is presented. The most prominent feature extraction and the techniques are also given. Finally, we summarized all research results discussed.

Face recognition is the process of identifying a person by comparing his facial image with the existing image in a trained database. The crucial step in face recognition system is the extraction of facial feature. We propose an efficient facial feature representation by using Dual Tree Complex Wavelet Transform (DT-CWT). The Complex WT face characterizes the geometrical structure of facial images by using the properties of DT-CWT such as approximate shift in-variance and good directional selectivity. Since the efficiency retained with DT-CWT is inadequate, a new block design using Dual Tree Complex Wavelet Transform along with efficient normalization and noise reduction techniques is developed and using that design a face recognition system is developed.KeywordsFace RecognitionDiscrete Cosine TransformRecognition RateGabor WaveletFace Recognition SystemThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Discriminative multi-layer illumination-robust feature extraction for face recognition

Dense feature extraction is becoming increasingly popular in face recognition tasks. Systems based on this approach have demonstrated impressive performance in a range of challenging scenarios. However, improvements in discriminative power come at a computational cost and with a risk of over-fitting. In this paper, we propose a new approach to dense feature extraction for face recognition, which consists of two steps. First, an encoding scheme is devised that compresses high-dimensional dense features into a compact representation by maximizing the intrauser correlation. Second, we develop an adaptive feature matching algorithm for effective classification. This matching method, in contrast to the previous methods, constructs and chooses a small subset of training samples for adaptive matching, resulting in further performance gains. Experiments using several challenging face databases, including labeled Faces in the Wild data set, Morph Album 2, CUHK optical-infrared, and FERET, demonstrate that the proposed approach consistently outperforms the current state of the art.

Neighbourhood preserving discriminant embedding in face recognition

This paper proposes a novel method for recognizing facial images based on the relative distances between an input image and example images. Example facial images can be easily collected online, and a large example database can span new possible facial variations not sufficiently learned during the learning phase. We first extract facial features using a baseline classifier that has a certain degree of accuracy. To achieve a better performance of the proposed method, we divide the collected examples into groups using a clustering method (e.g., k-means), where each clustered group contains examples with similar characteristics. We then hierarchically partition a group formed in the previous level into other groups to analyze more specific facial characteristics, which represent an example pyramid. To describe the characteristics of a group using the clustered examples, we divide the example group into a number of sub-groups. We calculate the averages of the sub-groups and select an example most similar to the average in each sub-group because we assume that the averages of the sub-groups can directly represent their characteristics. Using the selected examples, we build example code words for a novel feature extraction. The example code words are used to measure the distances to an input image and serve as anchors to analyze a facial image in the example domain. The distance values are normalized for each group at all pyramid levels, and are concatenated to form novel features for face recognition. We verified the effectiveness of the proposed example pyramid framework using well-known proposed features, including LBP, HOG, Gabor, and the deep learning method, on the LFW database, and showed that it can yield significant improvements in recognition performance.

A comprehensive account of almost all the feature extraction methods used in current face recognition systems is presented. Specifically we have made distinction in the holistic and local feature extraction and differentiate them qualitatively as opposed to quantitatively. It is argued that a global feature representation should be preferred over a bag-of-feature approach. The problems in current feature extraction techniques and their reliance on a strict alignment is discussed. Finally we have introduced to use face-GLOH signatures that are invariant with respect to scale, translation and rotation and therefore do not require properly aligned images. The resulting dimensionality of the vector is also low as compared to other commonly used local features such as Gabor, LBP etc. and therefore learning based methods can also benefit from it. In a typical multi-view face recognition task, where it is assumed to have several examples of a subject available for training, we have shown in an extensive experimental setting the advantages and weaknesses of commonly used feature descriptions. Our results show that under more realistic assumptions, most of the classifiers failed on conventional features. While using the introduced face-GLOH-signature representation is relatively less affected by large in-class variations. This has been demonstrated by providing a fair performance comparison of several classifiers under more practical conditions such as misalignments, large number of subjects and large pose variations. An important conclusion is to be drawn from the results on FERET is that conventional multi-view face recognition cannot cope well with regards to large pose variations. Even using a large number of training examples in different poses for a subject do not suffice for a satisfactory recognition. In order to solve the problem where only one training example per subject is available, many recent methods propose to use image synthesis to generate a given subject at all other views and then perform a conventional multi-view recognition (Beymer and Poggio, 1995; Gross et al, 2004). Besides the fact that such synthesis techniques cause severe artefacts and thus cannot preserve the identity of an individual, a conventional classification cannot yield good recognition results, as has been shown in an extensive experimental setting. More sophisticated methods are therefore needed in order to address pose invariant face recognition. Large pose differences cause significant appearance variations that in general are larger than the appearance variation due to identity. One possible way of addressing this is to learn these variations across each pose, more specifically by fixing the pose and establishing a correspondence on how a person’s appearance changes under this pose one could reduce the in-class appearance variation significantly. In our very recent work (Sarfraz and Hellwich, 2009), we demonstrate the usefulness of face-GLOH signature in this direction.

Multimodal feature extraction and fusion for audio-visual speech recognition

A powerful technique for three-dimensional object recognition has been the use of geometric invariants: measurable relationships between geometric objects that are invariant to transformations such as projection. Because of the invariance, these measurements will be the same whether measured on the actual three-dimensional object, or in the image. Therefore, objects in the image can be recognized if the same invariant can be found. In this paper, we investigate the automatic extraction of cross-ratio invariant features for object recognition. We show that clustering is a promising technique in this extraction, because it reduces the dependency on tuning parameters in the image processing phase.

Taste sensation recognition is valuable for developing virtual taste and the early diagnosis of taste system disorders. Electromyography (EMG) can characterize the information of taste sensation and have the advantages of a high signal-to-noise ratio and easy acquisition. This paper presents feature extraction and feature combination methods for taste sensation knowledge based on facial EMG. The time domain features, frequency domain features, time-frequency domain features, and entropy features are extracted as individual feature sets after data pre-processing. Combinations of different features are performed to acquire multivariate feature representations. Machine learning methods are used to predict taste sensation categories. The combination of the frequency domain, time-frequency domain, and entropy features as feature set and Random Forest method as classifier obtain the highest recognition accuracy. The results provide a reference for feature extraction and selection for basic taste sensation recognition.

Recently, automatic face recognition method has become one of the key issues in the field of pattern recognition and artificial intelligence. Typically, the face recognition process can be divided into three parts: the detection and recognition of human face, facial feature extraction and face recognition, and among which the facial feature extraction is the key to face recognition technology. In this paper, an extraction algorithm of face recognition feature, which is based on face recognition feature, is proposed. The experimental results based on the ORL face database demonstrate that this algorithm works well.

Novel local feature extraction for age invariant face recognition

Object detection and gender recognition were two different categories to be classified in a single section is a complicated task and this approach helps in supporting the blind people for an artificial vision. In this paper, our method to the betters vision sensation of blind persons by conversion of visualized data to audio data. Therefore this artificial intelligence model helps in detecting the objects as well as human face recognition with gender classification based on face recognition approach. This model processed with feature extraction and classification models. The feature extraction was comprised with multi scale-invariant feature transform (MSIFT), with feature optimization with support vector machine algorithm then classified using LASSO classifier. For better performance identification, three different classification models were implemented and tested too. Feature selection helps in making tests early to detect the objects and recognizing human actions using image processing approach. This approach can be applied for both offline and online modes. But in this scenario, an offline mode was implemented and was tested with a combination of different databases. For this process of classification ridge regression (RR), elastic net (EN), lasso regression (LR) and LASSO regression were implemented. The final classification results with accuracy are as follows for RR-89.6%, EN-93.5%, LR-93.2% and proposed approach (LRGS) with 98.4% accurate detection rate with prediction name of classes.