- Book Chapter
- 10.1016/b978-0-08-054558-5.50013-9
Chapter 5 - Vorticity Dynamics
- Jan 01, 2002
- Fluid Mechanics
- Pijush K Kundu + 1 more +1
Chapter 5 - Vorticity Dynamics
An apparatus is described which permits experiments performed on a rotating platform to be projected on a screen as they would appear to an observer in the rotating coordinate frame. The apparatus consists of a specially constructed overhead projector with a variable speed turntable and uses a suitably rotating dove prism to project a nonrotating image. A number of simple experiments which can be done on this apparatus are described. The principal purpose of the equipment is to convey an intuitive understanding of rotating reference frames and especially the centrifugal and coriolis pseudoforces.
Chapter 5 - Vorticity Dynamics
Chapter 5 - Vorticity Dynamics
Rotating vortex clusters in media with inhomogeneous defocusing nonlinearity.
We show that media with inhomogeneous defocusing cubic nonlinearity growing toward the periphery can support a variety of stable vortex clusters nested in a common localized envelope. Nonrotating symmetric clusters are built from an even number of vortices with opposite topological charges, located at equal distances from the origin. Rotation makes the clusters strongly asymmetric, as the centrifugal force shifts some vortices to the periphery, while others approach the origin, depending on the topological charge. We obtain such asymmetric clusters as stationary states in the rotating coordinate frame, identify their existence domains, and show that the rotation may stabilize some of them.
Read moreExperimental Force Coefficients for Two Sealed Ends Squeeze Film Dampers (Piston Rings and O-Rings): An Assessment of Their Similarities and Differences
Squeeze film dampers (SFDs) in aircraft engines effectively aid to reduce rotor motion amplitudes, in particular when traversing a critical speed, and help to alleviate rotor whirl instabilities. The current work is a long term endeavor focused on quantifying the dynamic force performance of practical SFDs, exploring novel design damper configurations, and producing physically sound predictive SFD models validated by experimental data. Piston rings (PRs) and O-rings (ORs), commonly used as end seals in SFDs for commercial and military gas turbine engines, respectively, amplify viscous damping in a short physical length and while operating with a modicum of lubricant flow. This paper presents experimental force coefficients (damping and inertia) for two identical geometry SFDs with end seals, one configuration hosts PRs, and the other one ORs. The test rig comprises a stationary journal and bearing cartridge (BC) hosting the SFD and supported on four elastic rods to emulate a squirrel cage. The damper film land length, diameter and clearance are L = 25.4 mm, D = 5L, and c = 0.373 mm (D/c = 340), respectively. A supply feeds ISO VG 2 oil to the film land at its middle plane through either one hole or three holes, 2.5 mm in diameter, 120° apart. In the PR-SFD, the lubricant exits thru the slit opening at the ring butted ends. The O-rings suppress oil leakage; hence, lubricant evacuates through a 1 mm hole at ¼ L near one journal end. The O-rings when installed add significant stiffness and damping to the test structure. The ORSFD produces 20% more damping than the PR-SFD, whereas both sealed ends SFDs show similar size added mass. For oil supplied at 0.69 bar(g) through a single orifice produces larger damping, 60% to 80% more than when the damper operates with three oil feedholes. A computational model reproducing the test conditions delivers force coefficients in agreement with the test data. Archival literature calls for measurement of a single pressure signal to estimate SFD reaction forces. For circular centered orbits, the dynamic pressure field, in the absence of any geometrical asymmetry or feed/discharge oil condition, “rotates” around the bearing with a speed equal to the whirl frequency. The paper presents force coefficients estimated from (a) measurements of the applied forces and ensuing displacements, and (b) the dynamic pressure recorded at a fixed angular location and “integrated” over the journal surface. The first method delivers a damping coefficient that is large even with lubricant supplied at a low oil supply pressure whereas the inertia coefficient increases steadily with feed pressure. Predictions show good agreement with the test results, in particular the added mass. On the other hand, identified damping and inertia coefficients from dynamic pressures show a marked difference from one pressure sensor to another, and vastly disagreeing with test results from the first method or predictions. The rationale for the discrepancy relies on local distortions in the dynamic pressure fields that show zones of oil vapor cavitation at a near zero absolute pressure and/or with air ingestion producing high frequency spikes from bubble collapsing; both phenomena depend on the magnitude of the oil supply pressure. An increase in lubricant supply pressure suppresses both oil vapor cavitation and air ingestion which produces an increase of both damping and inertia force coefficients. No prior art compares the performance of a PR-SFD vis-à-vis that of an OR-SFD. Supplying lubricant with a large enough pressure (flow rate) is crucial to avoid the pervasiveness of air ingestion. Lastly, the discussion on force coefficients obtained from two distinct methods questions the use of an oversimplifying assumption; the dynamic pressure field is not invariant in a rotating coordinate frame.
Read moreExperimental Force Coefficients for Two Sealed Ends Squeeze Film Dampers (Piston Rings and O-Rings): An Assessment of Their Similarities and Differences
Squeeze film dampers (SFDs) in aircraft engines effectively aid to reduce rotor motion amplitudes, in particular when traversing a critical speed, and help to alleviate rotor whirl instabilities. The current work is a long-term endeavor focused on quantifying the dynamic force performance of practical SFDs, exploring novel design damper configurations, and producing physically sound predictive SFD models validated by experimental data. Piston rings (PRs) and O-rings (ORs), commonly used as end seals in SFDs for commercial and military gas turbine engines, respectively, amplify viscous damping in a short physical length and while operating with a modicum of lubricant flow. This paper presents experimental force coefficients (damping and inertia) for two identical geometry SFDs with end seals, one configuration hosts PRs, and the other one ORs. The test rig comprises a stationary journal and bearing cartridge (BC) hosting the SFD and supported on four elastic rods to emulate a squirrel cage. The damper film land length, diameter, and clearance are L = 25.4 mm, D = 5L, and c = 0.373 mm (D/c = 340), respectively. A supply feeds ISO VG 2 oil to the film land at its middle plane through either one hole or three holes, 2.5 mm in diameter, 120 deg apart. In the PRSFD, the lubricant exits through the slit opening at the ring butted ends. The ORs suppress oil leakage; hence, lubricant evacuates through a 1 mm hole at ¼ L near one journal end. The ORs when installed add significant stiffness and damping to the test structure. The ORSFD produces 20% more damping than the PRSFD, whereas both sealed ends SFDs show similar size added mass. For oil supplied at 0.69 bar(g) through a single orifice produces larger damping, 60–80% more than when the damper operates with three oil feedholes. A computational model reproducing the test conditions delivers force coefficients in agreement with the test data. Archival literature calls for measurement of a single pressure signal to estimate SFD reaction forces. For circular centered orbits (CCOs), the dynamic pressure field, in the absence of any geometrical asymmetry or feed/discharge oil condition, “rotates” around the bearing with a speed equal to the whirl frequency. The paper presents force coefficients estimated from (a) measurements of the applied forces and ensuing displacements, and (b) the dynamic pressure recorded at a fixed angular location and “integrated” over the journal surface. The first method delivers a damping coefficient that is large even with lubricant supplied at a low oil supply pressure whereas the inertia coefficient increases steadily with feed pressure. Predictions show good agreement with the test results from measured forces and displacements, in particular the added mass. On the other hand, identified damping and inertia coefficients from dynamic pressures show a marked difference from one pressure sensor to another, and vastly disagreeing with test results from the first method or predictions. The rationale for the discrepancy relies on local distortions in the dynamic pressure fields that show zones of oil vapor cavitation at a near zero absolute pressure and/or with air ingestion producing high frequency spikes from bubble collapsing; both phenomena depend on the magnitude of the oil supply pressure. An increase in lubricant supply pressure suppresses both oil vapor cavitation and air ingestion, which produces an increase of both damping and inertia force coefficients. No prior art compares the performance of a PRSFD vis-à-vis that of an ORSFD. Supplying lubricant with a large enough pressure (flow rate) is crucial to avoid the pervasiveness of air ingestion. Last, the discussion on force coefficients obtained from two distinct methods questions the use of an oversimplifying assumption; the dynamic pressure field is not invariant in a rotating coordinate frame.
Read moreRotating frame nuclear relaxation of PBr 3: Off-resonance studies by fourier transform NMR
Rotating frame nuclear relaxation of PBr 3: Off-resonance studies by fourier transform NMR
Navier-Stokes predictions of pitch damping for a family of flared projectiles
: A parabolized Navier-Stokes approach has been applied to predict the pitch-damping force and moment coefficients for a family of flared projectiles. This family of flared projectiles, which has been tested in the Army Research Laboratory's (ARL) Aerodynamic Range, consists of a common forebody with various flared afterbodies including straight flares, biconic flares, straked flares, and flares with finlets. The predicted pitch-damping force and moment coefficients are determined from the aerodynamic side force and moment acting on the projectiles due to steady coning motion. The predictions of the flow field about the projectiles undergoing steady coning motion are accomplished using a rotating coordinate frame which rotates at the coning rate of the projectile. The governing equations have been modified to include the centrifugal and Coriolis force terms due to the rotating coordinate frame. The predictions of the pitch-damping moment coefficient are compared with pitch-damping coefficient determined from the inflight motion of the projectile. The predictions of the pitch-damping moment coefficients are in good agreement with the range data.
Read moreSpatial scanning hyperspectral imaging combining a rotating slit with a Dove prism.
We present a new concept for spatial scanning hyperspectral imaging. Spatial scanning is one of the main methods used for hyperspectral data acquisition and can provide high spectral resolution over a wide spectral range. However, conventional techniques, such as the whiskbroom and the pushbroom techniques, suffer from the need for relative motion between the target and the imaging system, which increases the complexity on the hardware side and limits the application possibilities. Our new approach combines a rotating slit and a co-rotating Dove prism. The rotating slit scans the target image by selecting one line from the image at each angular position of the slit. The rotating Dove prism is used to synchronously re-align the transmitted light from the selected image line with respect to the transmission grating to allow the projection of the diffracted light over the same range of pixel columns of the image sensor to facilitate data acquisition and extraction of spectral information. The new approach enables the spatial scanning of the target image without the need for relative linear motion or the use of additional external equipment and therefore opens the door for more application scenarios.
Read moreCurrent fault signatures of Voltage Source Inverters in different reference frames
This paper considers different current patterns used to identify the correct fault signatures in Voltage Source Inverters (VSI). At the beginning, the Authors consider the currents patterns from which a simple or a double fault can be encompassed both in the case of controllable device only or with its free wheeling companion diode. After the discussion of diagnosis algorithm suitable for electrical drives and principally based on a persistent near zero current condition current in the natural phase reference frame, the stationary reference frame is then considered as a tool to identify both the faulted phase as the device or various combination of faulted devices. On the contrary, the Authors finally demonstrate as in a rotating reference frame such informations are irretrievably lost. In the rotating reference frame only the presence of a open circuit fault can be detected without further elements to decide what phase or devices are then involved in. For this reason the stationary system appears the only satisfactory tool to provide all the diagnostic information both in order to schedule a maintenance operation or to hypothesize a reconfiguration of the VSI with the purpose of its possible fault tolerant operation.
Read moreAn evaluation of two Direct Current Control methods implemented with LabVIEW on a FPGA
This paper presents a comparison between two Direct Current Control (DCC) strategies for controlling a PMSM. The strategies are implemented on a Field Programmable Gate Array (FPGA) using national instruments compactRIO cRIO-9022 system. The first strategy operates in the Rotor Reference Frame (RRF) and uses two hysteresis squares to control the derivative of the current. Voltage vector is chosen based on the sign of the current errors in regard to the desired current value in the RRF. The second strategy is implemented in the Stator Reference Frame (SRF) and uses two hysteresis circles to control the current. Voltage vector is chosen based on the angular error in regard to the desired value in the SRF. Test sequences are conducted on a PMSM to compare the performance of the control strategies. The results show that the DCC in the SRF performs the given test sequences with a higher precision than the control strategy implemented in the RRF. The results also imply that the dynamic hysteresis bands are better suited for the control in the SRF than the control in the RRF.
Read moreSub-Riemannian geometry and clinical magnetic resonance tomography
Mensch, streckh deine Vernunfft hieher, diese dinge zu begreiffen! Johann Keppler (1571–1630) There is nothing that nuclear spins will not do for you, as long as you treat them as human beings. Erwin Louis Hahn (1949) Ein maschinelles ‘agencement’ ist den Schichten zugewandt, reinen Intensitäten, die sie zirkulieren läßt um die Selektion der ‘Konsistenzebene’ zu sichern, und der sich die Subjekte zuordnen, welchen sie einen Namen nur als Spur einer Intensität läßt. Gilles Deleuze und Félix Guattari (1988) The sense we make of the world is governed by our conceptual means. More specifically, sense is made of nature by projecting a conceptual structure onto observed events. This is accomplished by means of a semantic filter, which transforms raw data into semantically significant events. George L. Farre (1997) Phase coherent wavelets form a unified basis of the multichannel reconstruction analysis–synthesis filter bank, implemented by high-resolution synthetic aperture radar (SAR) imaging and clinical MRI. The construction of unitary bank filters is performed by the Kepplerian stratification technique. It allows for the cross-sectional quadrature filtering of phase histories in contiguous local frequency encoding subband multichannels relative to the rotating coordinate frame of quadrature reference. The Kepplerian quadrature detection strategy, which is based on the unitary filter bank construction takes place in symplectic affine planes of incidence immersed into the three-dimensional compact super-encoding projective space. The planes are implemented in the quadrature format of a phase-splitting network of Fourier analysis of the stratified Heisenberg nilpotent Lie group G. The action of the basic Lie group G of quantum physics under its sub-Riemannian geometry admits a matrix coordinatization by transvections. In terms of projective geometry, the longitudinal dilations act as a spectral transform on the transvections of the G
Read moreStatic Limit and Penrose Effect in Rotating Reference Frames
We show that effects similar to those for a rotating black hole arise for an observer using a uniformly rotating reference frame in a flat space-time: a surface appears such that no body can be stationary beyond this surface, while the particle energy can be either zero or negative. Beyond this surface, which is similar to the static limit for a rotating black hole, an effect similar to the Penrose effect is possible. We consider the example where one of the fragments of a particle that has decayed into two particles beyond the static limit flies into the rotating reference frame inside the static limit and has an energy greater than the original particle energy. We obtain constraints on the relative velocity of the decay products during the Penrose process in the rotating reference frame. We consider the problem of defining energy in a noninertial reference frame. For a uniformly rotating reference frame, we consider the states of particles with minimum energy and show the relation of this quantity to the radiation frequency shift of the rotating body due to the transverse Doppler effect.
Read moreExperimental Investigation of Unsteady Flow Field Within a Two-Stage Axial Turbomachine Using Particle Image Velocimetry
Detailed measurements of the flow field within the entire 2nd stage of a two-stage axial turbomachine are performed using particle image velocimetry. The experiments are performed in a facility that allows unobstructed view on the entire flow field, facilitated using transparent rotor and stator and a fluid that has the same optical index of refraction as the blades. The entire flow field is composed of a “lattice of wakes,” and the resulting wake-wake and wake-blade interactions cause major flow and turbulence nonuniformities. The paper presents data on the phase averaged velocity and turbulent kinetic energy distributions, as well as the average-passage velocity and deterministic stresses. The phase-dependent turbulence parameters are determined from the difference between instantaneous and the phase-averaged data. The distributions of average passage flow field over the entire stage in both the stator and rotor frames of reference are calculated by averaging the phase-averaged data. The deterministic stresses are calculated from the difference between the phase-averaged and average-passage velocity distributions. Clearly, wake-wake and wake-blade interactions are the dominant contributors to generation of high deterministic stresses and tangential nonuniformities, in the rotor-stator gap, near the blades and in the wakes behind them. The turbulent kinetic energy levels are generally higher than the deterministic kinetic energy levels, whereas the shear stress levels are comparable, both in the rotor and stator frames of references. At certain locations the deterministic shear stresses are substantially higher than the turbulent shear stresses, such as close to the stator blade in the rotor frame of reference. The nonuniformities in the lateral velocity component due to the interaction of the rotor blade with the 1st-stage rotor-stator wakes, result in 13 percent variations in the specific work input of the rotor. Thus, in spite of the relatively large blade row spacings in the present turbomachine, the nonuniformities in flow structure have significant effects on the overall performance of the system.
Read moreEncoding of visual targets during 3D reaching movements in human and non-human primates
The aim of my thesis was to investigate how reaching for visual targets placed in 3D space influences the coordinate frames and the kinematics in non-human and human primates. To this end, I conducted three studies. The first study was conducted on non-human primates to find the predominant reference frame of cells in a specific reach related area of the PPC (area PEc) while reaching towards targets placed at different depths and directions; we tested whether PEc reaching cells displayed hand- and/or body-centered coding of reach targets. We found that the majority of PEc neurons encoded targets in a mixed body/hand-centered reference frame. Our findings highlight a role for area PEc as intermediate node between the visually dominated area V6A and the somatosensory dominated area PE. The second study was conducted on healthy human subjects to find the reference frame used while reaching towards targets placed at different depths and directions. Our results revealed reach error patterns based on both eye- and space-centered coordinate systems: in depth more biased towards a space-centered representation and in direction mixed between space- and eye-centered representation. The third study was conducted on a patient with a parietal cortex lesion who showed optic ataxia symptoms. Optic ataxia patients show deficits in visuo-manual guidance especially when reaching to targets located in the periphery of the visual field. By manipulating gaze position and hand position of visual reaching targets, placed at different depth and directions, we investigated how reaching in peripheral and central viewing conditions influenced the trajectories and reach errors of the patient and controls. Our results suggest that the reaching inaccuracies observed, in particular in the configurations where the direction of gaze and reach differed, are due to a disruption of the online correction mechanism and that the PPC is involved in these automatic corrections.
Read moreOn the dynamics of Armbruster Guckenheimer Kim galactic potential in a rotating reference frame
In this article, we are interested in studying some dynamics aspects for the Armbruster Guckenheimer Kim galactic potential in a rotating reference frame. We introduce a non-integrability condition for this problem using Painleve analysis. The equilibrium positions are given and their stability is studied. Furthermore, we prove the force resulting from the rotation of the reference frame can be used to stabilize the unstable maximum equilibrium positions. The periodic solutions near the equilibrium positions are constructed by applying Lyapunov method. The permitted region of motion is determined.
Read moreDemonstrating Planetary Atmosphere Weather in a Portable Rotating Tank
Introduction: This project aims to create a small-scale physical simulator to demonstrate the effects of Coriolis and centrifugal forces in a uniformly rotating fluid. The pedagogical goal is to illustrate the key role of rotation in planetary atmosphere dynamics to students and the public through simple experiments in a portable laboratory setting. The design and production of a prototype began in 2021 as a student project. The Europlanet Public Engagement Funding Scheme provided funding to enhance the device in 2022. Further improvements to the prototype are ongoing, but the device is already suitable for outreach events. Plans for the future include transitioning from prototyping to serial production and developing step-by-step experiment guidelines.The device: Rotating tanks of various sizes are already in use at several geophysical laboratories (Fig. 1). However, our device stands out due to four innovative features:The device, tentatively named "Coriotron" or "Rotatron" (the final name is yet to be determined), is specifically designed to be folded and fit into a medium-sized suitcase for easy transportation to outreach and educational events (Fig. 5). It is adaptable for conducting a variety of experiments demonstrating the role of rotation in planetary atmospheric dynamics. For example, it can replicate several meteorological phenomena such as mid-latitude waves (Earth, Mars) and coherent vortices (polar or mid-latitude), as shown in Fig. 4. We are committed to minimizing production costs by seeking technical solutions that offer the best quality-to-price ratio (Fig. 2-3). Our aim is to create a device that is user-friendly and comfortable to operate while maintaining rigorous scientific standards. Currently, the device consists of a 50cm-diameter, 8kg-weight, motor-driven, wooden rotating platform. A plexiglass cylinder filled with water can be attached to the platform. An adjustable arm allows for the secure mounting of a camera approximately 50cm above the platform, enabling image capture in the rotating reference frame (refer to Fig. 2-4). An illumination system, although still in need of improvement, provides optimal lighting conditions for visualization. We currently control the device using Python-based software, with ongoing development to implement an ergonomic Graphical User Interface (GUI).Presently, the video signal from the camera is routed to a mobile phone and then shared with a laptop using an application. However, this setup introduces delays in signal transmission, which is not ideal. We are actively seeking solutions to directly transmit the video signal from the camera to a laptop and subsequently to a large screen or projector.Vision: If we successfully complete the prototyping of the initial device at relatively low costs, we can consider future production to meet the needs of the planetology and geophysics communities for portable experiments. The vision of this project is to manufacture such devices for distribution to multiple European institutions, accompanied by the development of step-by-step experiment guidelines. In doing so, it aligns with the objective of expanding and supporting a diverse and inclusive planetary community across Europe, while also fostering international collaboration to share best practices for utilizing the device during outreach events.Moreover, art and science seamlessly blend during experiments with this device, where two-dimensional turbulence in the rotating frame creates captivating abstract paintings when visualized with colored dye. If artists embrace the opportunity to utilize this device for artistic expression, the project's potential outreach could expand exponentially.Acknowledgments: The author would like to acknowledge funding from the Europlanet Public Engagement Funding Scheme 2022. The author is indebted to the “University Institute of Technology” (IUT) based in Annecy, France, for facilitating collaboration with two of their second-year students, and to the “La Turbine” cultural and educational centre (also based in Annecy, France) for offering a venue to host one of the students.Figure 1: The rotating tank in the laboratory simulates the effect of the planetary rotation using a local flat-planet approximation (Adapted from: Hill et al., BAMS 99, Issue 12, pp 2529-2538, 2018)Figure 2: A scheme of the portable rotating tank (Credits to: Aurélian GINET, project student in 2021)Figure 3: Picture of the device, including the Plexiglas cylinderFigure 4: Examples of mid-latitude waves and polar vortex reproduced in the portable rotating tank and visualized using coloured dyesFigure 5: The device can be folded and fitted in a medium-sized suitcase
Read more