- Conference Article
6
- 10.1109/idaacs.2015.7341377
Genetic algorithm based scheduling method for lifespan extension of a wireless sensors network
- Sep 01, 2015
- Yousif Elhadi Elsideeg Ahmed + 3 more +3
International audience
Motivated by increasingly strict policies aiming to reduce the pollutants emission that contribute to the greenhouse gases effect and seeking the sustainability of the electricity sector, buildings have great potential to contribute to these goals. For accounting more than a third of the world’s energy consumption and combining the growing incentive in Distributed Generation (DG) and the electric vehicle (EV) industry, smart buildings will be a key development in the years to come. In this way, this work presents an introduction to the linear programming (LP) optimization method and review the main works related to the scope of Smart Buildings (SB) energy resources optimization modeled as LP, with the objective to analyze different approaches taken to meet their goals.
Genetic algorithm based scheduling method for lifespan extension of a wireless sensors network
International audience
Optimizing Road Gradients Regarding Earthwork Cost, Fuel Cost, and Tank-to-Wheel Emissions
Emissions reduction has emerged as one of the principal targets in the planning and designing of road alignment today, and intelligent design methods can help optimize road alignment as a response toward more sustainable road infrastructures. The largest share of emissions in road transport occurs in the use phase; hence, considering vehicles’ behavior already in the early stages of the planning process is crucial. This study compares earthwork costs, fuel costs, and tank-to-wheel emissions of alternative road vertical alignments using a spline linear programming (LP) optimization method. The traditional minimal earthwork cost model is tailored and augmented with a fuel item to account for vehicle fuel costs. Three options are considered, including an earthwork-based (EW) optimal road alignment, a balanced earthwork-and-fuel cost (EW-FC) optimal alignment, and a minimal fuel cost (FC) alignment. Calculations are done for a reference test heavy-duty vehicle assumed to operate at uniform speed. The results exhibited that, although leading to some increase in earthwork costs, a design for balanced EW-FC cost yields substantial fuel budget and related emissions savings.
Read moreIntelligent context-awareness system for energy efficiency in smart building based on ontology
Intelligent context-awareness system for energy efficiency in smart building based on ontology
Impact of demand response and network payment schemes on generation and transmission expansion planning with high renewable energy penetration
Network Expansion Planning (NEP) plays a pivotal role in the development of power systems. It involves investing in new generating units and transmission lines to meet growing load demands and ensure a reliable electricity supply. Historically, the incorporation of demand response (DR) factors in power system planning has been limited due to their complexity and evaluation challenges. However, with advancements in smart grid technologies, increased integration of renewable energy, and the emergence of flexible loads, the inclusion of DR models has become crucial for enhancing power system reliability. While numerous studies have delved into generation and transmission expansion planning (GTEP) problems, only a few have explored the integration of network payment schemes and DR within the GTEP framework. This study proposes a multi-annual generation and transmission expansion planning model that incorporates three network payment schemes and two DR techniques. The objective is to secure financing for new generating units and transmission lines while minimizing the overall system cost. The proposed models employ the mixed-integer linear programming (MILP) optimization method and are validated using a modified IEEE 24-bus system. Two key system performance metrics, namely the network congestion index and network saturation index, are employed to assess system reliability and effectiveness. These results demonstrate that the integration of network payment schemes and DR techniques into the generation and transmission expansion planning model can lead to a cost reduction of 32.1% as compared to base model, reduced power system congestion and saturation (22.1%, 2.73%) to allow more renewable energy integration and enhanced power system reliability and operational flexibility.
Read moreImproving Real-Time Feasibility Analysis for Use in Linear Optimization Methods
In the design of time-critical applications, schedulability analysis can be used to define the feasibility region of tasks so that optimization techniques can find the best design solution that satisfies the deadlines. This method has been applied to obtain the optimal task implementation, priority assignment or placement of tasks onto CPUs in previous work. The definition of the feasibility region based on response time calculation requires many integer variables and is too complex for solvers. Approximation techniques have been used to define a convex subset of the feasibility region, often used in conjunction with branch and bound to compute sub-optimal solutions. In this paper, we provide an improved and simpler feasibility analysis method that allows an exact definition of the feasibility region in Mixed Integer Linear Programming (MILP) optimization methods. The encoding of the feasibility region using our method requires a significantly smaller number of binary variables and is viable for the treatment of industrial-size problems as shown by the experiments.
Read moreEnergy Cloud: Services for Smart Buildings
Energy consumption in buildings is responsible for a significant portion of the total energy use and carbon emissions in large cities. One of the main approaches to reduce energy consumption and its environmental impact is to convert buildings into smart buildings using computer, software, sensor, and network technologies. Using smart building energy management systems provides intelligent procedures to control buildings’ equipment such as HVAC (heating, ventilating, and air-conditioning) systems, home and office appliances, and lighting systems to reduce energy consumption while maintaining the required quality of living in all of the building’s spaces. This chapter discusses and reviews utilizing cloud computing to provide energy-related services to enhance the operations of smart buildings’ energy management systems. Cloud computing can provide many advantages for smart buildings’ energy management systems such as providing the required software models that implement different control and monitoring algorithms and providing optimization methods for more efficient energy consumption in smart buildings. This chapter will also discuss the benefits and issues of utilizing cloud computing services for enhancing energy consumption in smart buildings.
Read moreResearch of Green Building Energy Saving System Based on CFD
Building energy efficiency is a very effective way of energy-saving of green house, and intelligent technology is also a very important means of building energy efficiency. However, how the intelligent building energy-saving, due to the appropriate means of assessment was not established and no data to support. Intelligent building energy evaluation system for building energy consumption measurement, statistics, analysis and energy assessment in order to support the intelligent building energy-saving theory and data. This paper presents intelligent building in the new green building energy saving system based on CFD, and analyses intelligent building energy-saving evaluation system. The article extends the construction of intelligent content; enrich the connotation of the intelligent building, promoting intelligent building energy efficiency, with a strong use value and practical significance.
Read moreEnergy Consumption Optimization Method of Intelligent Internet of Things Building Based on Big Data Analysis
This article explores methods for optimizing energy consumption in smart buildings using big data analysis and Internet of Things (IoT) technology. The research initiates with the extraction of pivotal attributes-including time, ambient temperature, humidity levels, and illumination intensity-via the processes of data cleansing and preparation. Following this, both descriptive and inferential statistical methodologies are applied to investigate the interplay between energy usage and a range of contributing elements. For predicting future energy consumption patterns of structures, the investigation employs the Nonlinear Autoregressive (NAR) neural network approach alongside the Long Short-Term Memory (LSTM) network to develop a predictive model. Central to this endeavor is the Intelligent Energy Management System (IEMS), which harnesses AI and machine learning (ML) techniques to facilitate real-time surveillance, precise forecasting, and smart optimization of a building's energy consumption metrics. By leveraging IoT technology, the IEMS gathers consumption data, applies advanced big data analytics combined with ML algorithms for processing and interpretation, and devises optimal strategies for energy utilization predicated on forecast outcomes and external influences. Empirical findings indicate that the deployment of these optimization tactics has led to a reduction in overall building energy consumption by approximately 20.35 %, with the most pronounced effect observed in air conditioning energy use, which saw a decrease of 25.23%. This research shows that the intelligent building energy consumption management system combining big data analysis and IoT technology has remarkable effects in improving energy utilization efficiency and reducing energy consumption, which provides strong technical support and practical reference for energy consumption optimization of intelligent buildings in the future.
Read moreA Review On Smart Building And Blockchain Technology
When looking at the history of humanity, continuous change and development have been observed that have been the new needs of people, and solutions can be found for these requirements. The Industrial Revolution is one of these developments and consumption type and limit was changed after this point. This revolution brought the significance of energy production and consumption. Since the construction industry is the field that consumes the most energy, it is very important to control energy in buildings. With this essential, smart building systems which are require sensor data and an internet connection. Thus, a new requirement has emerged regarding the security and storage of sensor data. Blockchain technology is considered a feasible option to address uncertainties related to process tracking, data storage and data transparency. In this paper, the keywords "blockchain technology" and "smart building" found in the literature are examined to discuss what can be used to process data in smart buildings and ensure the security of this data.
Read moreConnecting the Last Mile: Demand Response in Smart Buildings
Connecting the Last Mile: Demand Response in Smart Buildings
Power Consumption Constrained Task Scheduling Using Enhanced Genetic Algorithms
Two typical challenges in the energy aware tasking scheduling are (1) minimizing energy consumption with execution time constraint and (2) minimizing task execution time with energy consumption constraint. This chapter focuses on the later challenge. It is very important to efficiently schedule tasks in mobile devices and sensor networks that have limited power. The goal is to cooperatively complete a set of tasks among diverse computing resources with given energy. Traditional scheduling algorithms, such as list scheduling, are not very efficient for this scheduling problem. Linear programming optimization method does not fit well since it is a non-linear problem. An enhanced genetic algorithm can solve this problem effectively.
Read moreA Data-Driven Forecasting Strategy to Predict Continuous Hourly Energy Demand in Smart Buildings
Smart buildings seek to have a balance between energy consumption and occupant comfort. To make this possible, smart buildings need to be able to foresee sudden changes in the building’s energy consumption. With the help of forecasting models, building energy management systems, which are a fundamental part of smart buildings, know when sudden changes in the energy consumption pattern could occur. Currently, different forecasting methods use models that allow building energy management systems to forecast energy consumption. Due to this, it is increasingly necessary to have appropriate forecasting models to be able to maintain a balance between energy consumption and occupant comfort. The objective of this paper is to present an energy consumption forecasting strategy that allows hourly day-ahead predictions. The presented forecasting strategy is tested using real data from two buildings located in Valladolid, Spain. Different machine learning and deep learning models were used to analyze which could perform better with the proposed strategy. After establishing the performance of the models, a model was assembled using the mean of the prediction values of the top five models to obtain a model with better performance.
Read moreClustering and Deep-Learning for Energy Consumption Forecast in Smart Buildings
The proper operation of Heating, Ventilation, and Air Conditioning (HVAC) systems is crucial to reduce energy consumption because they are the major consumers of energy in buildings. Prognostic and Health Management Systems (PHMS) can assist both operators and managers of Smart Buildings, anticipating potential problems that can reduce the energy efficiency of the building. However, PHMS usually lack the capability of predicting changes on Key Performance Indicators (KPIs) related to energy consumption. Therefore, having a reliable method to predict the energy demand of a building’s HVAC system is an important complement to a building’s PHMS. This paper proposes a data-driven methodology to create predictive models of energy demand taking into account the effect of weather conditions on energy consumption. The methodology consists of two stages. The first considers the environmental variables affecting the building to identify clusters with similar conditions. For the second stage, Deep Learning Long-short Term Memory (LSTM) models in an encoder-decoder architecture were used. Our proposal is to build two different types of models, named reference cluster and recent models, both being able to predict the total heating demand of a smart building in the short and medium term, one day and one week in advance. The reference cluster model is built with historical data from the distant past for each cluster. The recent model is built with historical data from the immediate past. In this paper we have applied this methodology to a smart educational building: the Alice Perry School of Engineering at the National University of Ireland in Galway. This case study illustrates the methodology and successfully tests its feasibility. Both reference cluster and recent models provide predictions achieving the acceptance criteria in this domain.
Read moreApplication of Renewable Energy in Green Buildings and Energy Consumption Optimization
INTRODUCTION: With the increasing global awareness of sustainable development and environmental protection, green building has become one of the important development directions in the construction industry. The application of sustainable type energy in the construction industry is of great significance in reducing building energy consumption and environmental pollution. This study aims to explore the application of sustainable types of energy and conduct research on energy consumption optimization. OBJECTIVE: The aim of this study is to analyze the current situation of the application of sustainable types of energy in the construction industry, to explore its impact on the energy consumption of buildings, and to propose corresponding optimization strategies in order to achieve the goal of sustainable development of green buildings in China. METHODS: This study adopts a combination of literature review and case study; firstly, a literature review on the application of sustainable types of energy, sorting out its technical characteristics and application effects; then, several typical cases are selected to analyze its energy application and energy consumption in buildings; finally, relevant strategies and suggestions for optimizing the energy consumption are put forward by combining the results of the literature review and the case study. RESULTS: Through the literature review and case analysis, it is found that sustainable types of energy, such as solar energy and wind energy, have been widely used in buildings and achieved certain energy-saving effects. However, there are also some problems, such as inefficient energy utilization and high cost. To address these problems, this study proposes a series of optimization strategies, including suggestions for optimizing energy system design, improving energy utilization efficiency, and reducing energy costs. CONCLUSION: This study concludes that the application of sustainable types of energy in green buildings is an important way to optimize building energy consumption and sustainable development. Through measures such as optimizing energy system design and improving energy utilization efficiency, building energy consumption can be further reduced, environmental pollution can be reduced, and the development of the construction industry can be promoted. However, further research and practice are still needed to continuously improve relevant technologies and policies to promote the application and development of sustainable types of energy in buildings.
Read moreAnalysis of Using Biogas Resources for Electric Vehicle Charging in Bangladesh: A Techno-Economic-Environmental Perspective
The growing popularity of electric vehicles (EV) is creating an increasing burden on the power grid in Bangladesh due to massive energy consumption. Due to this uptake of variable energy consumption, environmental concerns, and scarcity of energy lead to investigate alternative energy resources that are readily available and environment friendly. Bangladesh has enormous potential in the field of renewable resources, such as biogas and biomass. Therefore, this paper proposes a design of a 20 kW electric vehicle charging station (EVCS) using biogas resources. A comprehensive viability analysis is also presented for the proposed EVCS from technological, economic, and environmental viewpoints using the HOMER (Hybrid Optimization of Multiple Energy Resources) model. The viability result shows that with the capacity of 15–20 EVs per day, the proposed EVCS will save monthly $16.31 and $29.46, respectively, for easy bike and auto-rickshaw type electric vehicles in Bangladesh compare to grid electricity charging. Furthermore, the proposed charging station can reduce 65.61% of CO2 emissions than a grid-based charging station.
Read more