A Systematic Literature Review on Leaf Disease Recognition Using Computer Vision and Deep Learning Approach

The accurate recognition and early warning for plant diseases and pests are a prerequisite of intelligent prevention and control for plant diseases and pests. As a result of the phenotype similarity of the hazarded plant after plant diseases and pests occur, as well as the interference of the external environment, traditional deep learning models often face the overfitting problem in phenotype recognition of plant diseases and pests, which leads to not only the slow convergence speed of the network, but also low recognition accuracy. Motivated by the above problems, the present study proposes a deep learning model EResNet-support vector machine (SVM) to alleviate the overfitting for the recognition and classification of plant diseases and pests. First, the feature extraction capability of the model is improved by increasing feature extraction layers in the convolutional neural network. Second, the order-reduced modules are embedded and a sparsely activated function is introduced to reduce model complexity and alleviate overfitting. Finally, a classifier fused by SVM and fully connected layers are introduced to transforms the original non-linear classification problem into a linear classification problem in high-dimensional space to further alleviate the overfitting and improve the recognition accuracy of plant diseases and pests. The ablation experiments further demonstrate that the fused structure can effectively alleviate the overfitting and improve the recognition accuracy. The experimental recognition results for typical plant diseases and pests show that the proposed EResNet-SVM model has 99.30% test accuracy for eight conditions (seven plant diseases and one normal), which is 5.90% higher than the original ResNet18. Compared with the classic AlexNet, GoogLeNet, Xception, SqueezeNet and DenseNet201 models, the accuracy of the EResNet-SVM model has improved by 5.10%, 7%, 8.10%, 6.20% and 1.90%, respectively. The testing accuracy of the EResNet-SVM model for 6 insect pests is 100%, which is 3.90% higher than that of the original ResNet18 model. This research provides not only useful references for alleviating the overfitting problem in deep learning, but also a theoretical and technical support for the intelligent detection and control of plant diseases and pests. © 2024 Society of Chemical Industry.

A comprehensive review on detection of plant disease using machine learning and deep learning approaches

Recent advances in computer vision have led to the development of a robust learning technique that can identify and diagnose plant diseases using photos captured by a camera. This practical approach can help detect various illnesses in different plant species, including apples, corn, grapes, potatoes, tomatoes, and sugar cane. The system's architecture specifically targeted these plants for detection and recognition, and it can detect several plant diseases. To develop deep learning models for plant disease detection and recognition, scientists used 35,000 photos of both disease-free and diseased plant leaves. The system achieved up to 100% accuracy in identifying the type of plant and the diseases affecting it, with the trained model achieving an accuracy rate of 96.5%. The technique involved using convolutional neural networks, computer vision, deep learning, and plant disease recognition.

A review on automated plant disease detection: motivation, limitations, challenges, and recent advancements for future research

Computer vision has been transformed by deep learning, which has made it possible for robots to comprehend and interpret visual data at previously unheard-of levels. This study explores deep learning for computer vision systems: future trends and upcoming technology. Looking ahead, several significant advancements are reshaping this profession. First off, a viable approach is to combine deep learning architectures with generative models like Variational Autoencoders (VAEs) and Generative Adversarial Networks (GANs). This synergy makes activities like picture generation, style transfer, and data augmentation easier and enables a more nuanced interpretation of visual data. Second, a key component of deep learning for computer vision is now recognized to be attention mechanisms. These techniques, which are based on human visual attention, allow models to concentrate on particular areas of a picture, improving efficiency and interpretability. Tasks such as object detection, image segmentation, and image captioning demonstrate the critical role of attention mechanisms. Moreover, computer vision is reaching new heights thanks to the combination of deep learning and other cutting-edge technologies. Real-time processing on devices is made possible by the combination of deep learning and edge computing, which lowers latency and improves privacy. Furthermore, new opportunities for applications in augmented reality, robotics, and immersive experiences are being created by the combination of deep learning and 3D vision technologies. In the deep learning space for computer vision, transfer learning and meta-learning are likewise becoming more and more popular [1]. These methods increase performance on a different but related job by utilizing pre-trained models or knowledge from one task. This method minimizes the need for large datasets for training in situations where labeled data is rare. Deep learning in computer vision raises ethical questions that are becoming more and more significant. Concerns about decision interpretability, algorithmic bias, and privacy are becoming more prevalent. Fairness, accountability, and transparency must be given top priority in this field's future developments in order to guarantee the appropriate use of these technologies. In conclusion, there are a lot of promising things that lie ahead for deep learning in computer vision. Advances in transfer learning, attention mechanisms, and the integration of generative models are all leading to more complex and effective vision systems. As these technologies advance, it is critical to address ethical issues in order to build trust and guarantee that deep learning has a good social impact. This study offers a thorough analysis of these recent developments, providing insight into the future direction of deep learning for computer vision.

In recent years, plant leaf diseases has become a widespread problem for which an accurate research and rapid application of deep learning in plant disease classification is required, tomato is also one of the most important plants and seeds which are used worldwide for cooking in either dried or fresh form, tomato are a great source of protein that offer many health benefits, but there are a lot of diseases associated with tomato leaf which hinder its production. Thus, an accurate classification of tomato leaf diseases is needed to solve the problem in the early stage. A deep learning approach is proposed to identify and classify leaf disease by using public dataset of leaf image and CNN model with the open source library TensorFlow. In this project, we proposed a method to classify tomato leaf disease and to find and describe the efficient network architecture (hyper parameters and optimization methods). Moreover, after applying each architecture separately, we compared their obtained results to find out the best architecture configuration for classifying tomato leaf diseases and their results. Furthermore, to satisfy the classification requirements, the model was trained using CNN architecture check if we could get faster training times, higher accuracy and easier retraining. Deep learning is a branch of artificial intelligence. In recent years, with the advantages of automatic learning and feature extraction, it has been widely concerned by academic and industrial circles. It has been widely used in image and video processing, voice processing, and natural language processing. At the same time, it has also become a research hotspot in the field of agricultural plant protection, such as plant disease recognition. The application of deep learning in plant disease recognition can avoid the disadvantages caused by artificial selection of disease spot features, make plant disease feature extraction more objective, and improve the research efficiency and technology transformation speed. This review provides the research progress of deep learning technology in the field of crop leaf disease identification in recent years. In this project, we present the current trends and challenges for the detection of plant leaf disease using deep learning and advanced imaging techniques. We hope that this project will be a valuable resource for researchers who study the detection of plant diseases. At the same time, we also discussed some of the current challenges and problems that need to be resolved.

The detection of diseases in rice plants is an essential step in ensuring healthy crop growth and maximizing yields. A real-time and accurate plant disease detection technique can assist in the development of mitigation strategies to ensure food security on a large scale and economical rice crop protection. An accurate classification of rice plant diseases using DL and computer vision could create a foundation to achieve a site-specific application of agrochemicals. Image investigation tools are efficient for the early diagnosis of plant diseases and the continuous monitoring of plant health status. This article presents an Enhanced Sea Horse Optimization with Deep Learning-based Multimodal Fusion for Rice Plant Disease Detection and Classification (ESHODL-MFRPDC) technique. The proposed technique employed a DL-based fusion process with a hyperparameter tuning strategy to achieve an improved rice plant disease detection performance. The ESHODL-MFRPDC approach used Bilateral Filtering (BF)-based noise removal and contrast enhancement as a preprocessing step. Furthermore, Mayfly Optimization (MFO) with a Multi-Level Thresholding (MLT) based segmentation process was used to recognize the diseased portions in the leaf image. A fusion of three DL models was used for feature extraction, namely Residual Network (ResNet50), Xception, and NASNet. The Quasi-Recurrent Neural Network (QRNN) was used for the recognition of rice plant diseases, and its hyperparameters were set using the ESHO method. The performance of the ESHODL-MFRPDC method was validated using the rice leaf disease dataset from the UCI database. An extensive comparison study demonstrated the promising performance of the proposed method over others.

Crops play a vital role in the global food supply. Various environmental factors can cause crop diseases and insect pests, resulting in severe production losses. However, manual detection of crop diseases and insect pests is a time-consuming and error-prone process, which often fails to identify and prevent the spread of plant diseases in a timely and effective manner. To overcome these challenges, machine learning (ML) and deep learning (DL) technologies have been introduced in recent years to improve early identification and effective response to plant pests and diseases. In this article, the principles of convolutional neural network (CNN), recurrent neural network (RNN) and adversarial generative neural network (GAN) are explained, as well as the latest progress in the improvement and application of the three algorithms in plant disease detection and detection. By applying DL technology, efficient and accurate detection of pests and diseases can be achieved, thereby providing reliable support for agricultural production. It is hoped that this work will become a valuable resource for researchers studying plant pest and disease detection and provide guidance to further advance research and practice in this field. At the same time, some current challenges and issues that need to be solved are also discussed, such as data quality, target occlusion, model generalization ability, and adaptability in practical applications. Deep learning holds great promise in revolutionizing precision agriculture by providing efficient and accurate solutions for pest and disease management.

In Indian Cuisine Tomatoes plays a substantial role on the everyday platter. India is one of the largest producers of tomatoes in the world, nevertheless, the stature and volume of tomato yield befall accompanying numerous recent diseases. Tomatoes may help fight various diseases in human health but it is appropriate to save tomatoes from getting affected by a variety of diseases. Existing CNN models are good in disease classification, still, accurate disease detection with minimal computational complexity is a challenging task. A fusion-based voting strategy is performed to propose a novel disease detection technique with optimized deep learning for enriching the detection accuracy. A deep learning-based CNN model including EfficientNet, ShuffleNet, and SqueezeNet categorizes the diseases by using the following iteration, Identification of plant leaf images, pre-treatment of images, segmentation, feature extraction, and categorization of different diseases based on the voting strategy. The effectiveness of this study is assessed using various evaluation metrics and among the CNN models evaluated, EfficientNet achieved the highest accuracy at 98.74%, followed by SqueezeNet at 97.39%, and ShuffleNet at 95.86%. Enabling farmers to achieve bountiful crop yields and enhance food production, this research assists in early disease detection in plants with minimal computational complexity.

Citrus fruit crops are among the world’s most important agricultural products, but pests and diseases impact their cultivation, resulting in yield and quality losses. Computer vision and machine learning have been widely used to detect and classify plant diseases over the last decade, allowing for early disease detection and improving agricultural production. This paper presented an automatic system for the early detection and classification of citrus plant diseases based on a deep learning (DL) model, which improved accuracy while decreasing computational complexity. The most recent transfer learning-based models were applied to the Citrus Plant Dataset to improve classification accuracy. Using transfer learning, this study successfully proposed a Convolutional Neural Network (CNN)-based pre-trained model (EfficientNetB3, ResNet50, MobiNetV2, and InceptionV3) for the identification and categorization of citrus plant diseases. To evaluate the architecture’s performance, this study discovered that transferring an EfficientNetb3 model resulted in the highest training, validating, and testing accuracies, which were 99.43%, 99.48%, and 99.58%, respectively. In identifying and categorizing citrus plant diseases, the proposed CNN model outperforms other cutting-edge CNN model architectures developed previously in the literature.

To identify novel advancements in plant diseases detection and classification systems employing Machine Learning (ML), Deep Learning (DL), and Transfer Learning (TL), this research compiled 111 peer-reviewed papers published between 2019 and early 2023. The literature was sourced from databases such as Scopus and Web of Science using keywords related to deep learning and leaf disease. A structured analysis of various plant disease classification models is presented through tables and graphics. This paper systematically reviews the model approaches employed, datasets utilized, countries involved, and the validation and evaluation methods applied in plant disease identification. Each algorithm is annotated with suitable processing techniques, such as image segmentation and feature extraction, along with standard experimental metrics, including the total number of training/testing datasets utilized, the quantity of disease images considered, and the classifier type employed. The findings of this study serve as a valuable resource for researchers seeking to identify specific plant diseases through a literature-based approach. Additionally, the implementation of mobile-based applications using the DL approach is expected to enhance agricultural productivity.

The growing success and popularity of deep learning in computer vision have resulted in the availability of several pretrained deep learning architectures (such as AlexNet, ResNet, VGGNet among others). A common practice in deep learning research is to use one of the pre-trained models and fine-tune it to a given target task, using training data from the target. However, training a deep learning model efficiently necessitates expensive, high-quality GPUs and distributed computing infrastructures. Some applications (such as those running on mobile platforms) are severely limited in terms of memory and computational resources; in these applications, it is a significant challenge to fine-tune a pre-trained deep learning model to a target task, using large amounts of target training data. Cloud services can be leveraged for training, but involve issues with data privacy and cost. In such applications, it is important to select an informative subset of the training data and fine-tune the deep model using only the selected subset. In this paper, we propose a novel framework to address this problem. We pose subset selection as a constrained NP-hard integer quadratic programming problem and derive an efficient linear relaxation to select a subset of exemplar instances. Our extensive empirical studies on three challenging vision datasets (from different application domains) using three commonly used pre-trained deep learning models corroborate the potential of our framework for real-world, resource-constrained applications.

Plant disease can seriously affect the growth and development of plants, resulting in reduced production and even death. Disease control can assist in plant breeding and cultivation, ensuring crop yield and quality. But traditional disease control methods are increasingly difficult to meet modern time, space and cost requirements. Deep learning technology has developed rapidly in recent years; it can improve the efficiency of plant disease diagnosis and detection, and greatly reduce the risk of human intervention and misjudgment. However, challenges such as data acquisition, environmental interference, and model deployment complexity hinder the application of deep learning in plant disease control. Therefore, there is an urgent need for disease feature optimization algorithms to protect current large-scale agricultural production.This research topic provides a platform for sharing the latest research results of deep learning in control of plant disease. The focus on the progress of deep learning technology in this field mainly involves the application of advanced technology in plant disease feature adaptation. This research topic aims to explore the latest research and application of deep learning technology in plant disease identification and control, focusing on: 1) identification techniques for early plant disease, 2) prediction and prevention of the spread of plant disease, 3) new methods for collecting multi-source plant disease image data, 4) quantitative evaluation of plant damage, 5) real-time application deployment based on embedded devices and edge wearable devices, 6) adaptive image processing methods for different application environments.A study by Le Yang et al. explored a new maize weed recognition model, SE-VGG16, and applied the SE-VGG16 model to weed detection of other species to build a weed detection model with the ability to generalize weed control in agricultural production processes. SE-VGG16 model is based on VGG16, adding SE attention mechanism. The model implements automatic focusing and allocates limited information processing resources to important parts. It has the characteristics of high efficiency, stability and high detection accuracy.Pushkar Gole et al. focused on lightweight visual converter networks in a study of automatic plant disease recognition. This study mainly introduces two tasks: one is to replace a multilayer perceptron (MLP) with the initial module and reconstruct the transformer Inception module to reduce the computational complexity of the vision transformer (ViT) model. In addition, the proposed new network is trained and tested on the PlantVillage dataset and the field maize image dataset, which proves its applicability in real scenarios.Further, Xin Xu et al. studied a cotton moth infestation monitoring method. In this study, five different models of cotton aphid infestation identification were constructed, trained and tested, among which YOLOv5 model had the best performance. The real-time identification system established in this study can provide a faster and more convenient technical means for the monitoring of cotton aphid infection.In another article, Nak Jung Choi et al. focused on identifying and tracking the behavior, movement, size, and habits of different species of insects by building a 3D monitoring system. While traditional 2D monitoring systems are static and ignore Zaxis depth dimensions, 3D systems are able to track insect movement more comprehensively, providing valuable depth dimension insights.Another study by Jitong Cai et al., explored a lightweight CNN model, FCA-EfficientNet, to achieve accurate identification of multiple maize disease. The work introduced autofocus modules and FCA modules to filter out background noise, allowing the network to focus on disease areas. It also makes the model more lightweight by removing redundant network structures.In addition, Fei Nan et al. studied the classification of maize disease from another angle. They focused on a deep convolutional neural network with RGB-D images. Among them, a variety of improved data preprocessing methods improved the accuracy and speed of maize diseases image recognition.A study by Zhenghang Zhang et al. explored the potential of applying Generative Adversarial Networks (GANs) to the diagnosis of cotton fusarium wilt. This study designed a model based on small sample learning and proposed an innovative cotton verticillium wilt diagnosis system. The convolutional neural network is used as feature extractor, and the trained GANs model is used for sample enhancement to improve the classification accuracy.In summary, these findings highlight the significant advances that deep learning technology has made in identifying and controlling plant disease in the information age. In the future, these models can be deployed in smart agriculture systems to monitor and identify plant disease in real time, so that appropriate control measures can be taken in a timely manner. As deep learning technology continues to evolve and improve, we can expect these models to play an increasingly important role in plant disease control, providing more effective support for agricultural production.

The uprising trend of deep learning in computer vision and artificial intelligence can simply not be ignored. On the most diverse tasks, from recognition and detection to segmentation, deep learning is able to obtain state-of-the-art results, reaching top notch performance. In this paper we explore how deep convolutional neural networks dedicated to the task of object detection can improve our industrial-oriented object detection pipelines, using state-of-the-art open source deep learning frameworks, like Darknet. By using a deep learning architecture that integrates region proposals, classification and probability estimation in a single run, we aim at obtaining real-time performance. We focus on reducing the needed amount of training data drastically by exploring transfer learning, while still maintaining a high average precision. Furthermore we apply these algorithms to two industrially relevant applications, one being the detection of promotion boards in eye tracking data and the other detecting and recognizing packages of warehouse products for augmented advertisements.

Early and accurate detection of plant diseases is essential for improving agricultural productivity, reducing crop losses, and ensuring global food security. Traditional disease identification methods rely heavily on manual visual inspection, which is time-consuming, subjective, and impractical for large-scale farming environments. Recent advancements in artificial intelligence, particularly deep learning and computer vision, provide promising automated solutions for real-time plant disease diagnosis. This study proposes Kisan Seva, an AI-driven plant disease detection framework based on transfer learning using the MobileNetV2 convolutional neural network, designed to achieve high classification performance while maintaining computational efficiency suitable for deployment on resource-constrained agricultural devices. The system is trained and evaluated using the widely adopted PlantVillage dataset. To rigorously validate the effectiveness of the proposed approach, a comparative evaluation is conducted against traditional machine learning classifiers, including Support Vector Machine (SVM) and k-Nearest Neighbor (KNN). The framework further incorporates infected area estimation to provide quantitative disease severity analysis. The proposed system aims to contribute toward AI-enabled precision agriculture and farmer-centric decision support systems. Keywords—Plant Disease Detection, Deep Learning, Transfer Learning, MobileNetV2, Machine Learning, Precision Agriculture.